L.L.Bean All-Weather Presidential Rocker User manual

All-Weather Presidential Rocker
Assembly Instructions

PARTS TOOLS
x 14 x 4 x 2
.27 X 3 SOCKET WAFER
1/4-20 X 2-1/2 WAFER
Finial with
dowel screw
4mm T-handle
hex key (included)
4mm hex, straight,
for drill (included)
A
B
Thank you for purchasing our All-Weather
Presidential Rocker.
Assembly of this product requires a 4mm Hex Key
which is included. Additionally, a 4mm Straight Hex
bit is included for use with a hand-held power drill.
We have found it helpful to have a second person
present in at least one step of the assembly.
C
1
Attach rocker bottoms to side frames using four
(4) screws.
A
A
A
A
A

2 3
Position other Side Frame onto Braces and Seat
Frame. Start five (5) screws, but KEEP LOOSE.
A
Long
Braces
Front of Seat
is Wider
Attach Long Braces, Short Brace and Seat
Frame to Side Frame using five (5) screws.
A
A
A
A
A
A
A
A
A
A
A
5
Attach Finials to tops of posts. Perform one last
check to make sure all screws are tight.
Make sure all
screws are tight
CC
4
Front of Seat
is Wider
Place Seat Panel, Back Panel, and Head Piece in
position. Start 4 screws, but KEEP LOOSE.
B
B
B
B
B

Care
This material is made of HDPE plastic resin that has been purified and UV protected. It is
generally cared for and cleaned with soap and warm water. For certain stains and additional
cleaning power, a 1/3 bleach and 2/3 water solution can be used on the product without
aecting the color. Also, a popular method of cleaning is a high-pressure power wash.
(Not to exceed 1,500 psi, which is the equivalent of a car wash.) The surface characteristics
of the product may require the use of a soft bristle brush to get into the creases.
Due to the nature of the woven inserts used on the seat and back, we recommend storing
this product during winter months.
The hardware used in the assembly and construction of our furniture is 300 series
commercial grade stainless steel with a cosmetic coating. Although the quality of the
hardware has a high level of corrosive resistance, the hardware can show some signs of
corrosion in salt air environments.
A practical solution to these signs of corrosion is to wash the product with soap and water,
using a soft bristle brush to scrub the corroding areas of the hardware. Also, use appliance
touch up paint in the appropriate color to protect the hardware. Appliance touch up paint
can be purchased at local hardware stores.
www.llbean.com
Product Support 1 800 341 4341
1/12/2016