L.L.Bean FARMHOUSE TABLES User manual

FARMHOUSE TABLES
Thank you for purchasing our Farmhouse Table. Assembly of this product requires a
wrench. We have found it helpful to have a second person present in at least one
step of the assembly
UN76/UN77/YY35060311

FARMHOUSE TABLES
Thank you for purchasing our Farmhouse Table. Assembly of this product requires a
wrench. We have found it helpful to have a second person present in at least one
step of the assembly
UN76/UN77/YY35060311

STEP 1
Read through these instructions thoroughly before
beginning assembly. We have found this to be of
great value when first assembling this product.
STEP 2
Remove all parts and hardware from packing
material. Wooden pieces should be placed on a non
abrasive surface (like the carton or carpet) to prevent
damage to the finish.
STEP 3
Identify all parts using parts list at right.
PARTS
PARTS INCLUDED:
a) 1 Pre-assembled tabletop
b) 4 Legs
c) Set of hardware (Washers and Nuts)
STEP 4
Assembly of this product requires a wrench. We
have found it helpful to have a second person
present in at least one step of the assembly.
TOOLS NEEDED: Wrench
STEP 5
Detach leg box from under the table and pull out all
legs.
STEP 6
Detach hardware package stapled under the top.
1 of 2 UN76/YY35/UN77062812

STEP 7
Insert leg into the metal corner plaque and place two screws into each hole.
STEP 8
Secure firmly with the washer and bolt as shown in diagram. Tighten with a wrench.
STEP 9
Repeat for other three legs.
STEP 10
Turn table right side up.
LEAF INSERTION AND REMOVAL:
A) Unlock the swivels located on the underside
of the tabletop.
B) Grip table at each end and pull to open,
remove/insert leaf. Turn the swivel to lock.
C) Store the leaf in a flat position.
CARE
To clean, wipe with a soft, slightly damp cloth and
dry thoroughly.
www.llbean.com
Product Support 1 800 341 4341
2 of 2 UN76/YY35/UN77062812