LAI Games FireFighter User manual

► READ THIS MANUAL BEFORE OPERATING THE MACHINE.
► KEEP THIS MANUAL FOR YOUR REFERENCE.
© LAI GAMES
www.laigames.com

LAI GAMES
[email protected] www.laigames.com
LAI GAMES
© LAI GAMES
Copyright Notice:
Authorization is hereby provided to you to copy this
manual in its entirety provided such copies are used for
non-commercial purposes and solely for use with LAI
GAMES products. This authorization is specifically
conditioned to include all legends, copyright, proprietary
and other notices which appear herein are unaltered on
any and all copies you make.
Correspondence regarding this machine should be addressed to your
closest LAI GAMES office, or LAI GAMES Distributor.
For contact details, refer to the back page of this manual.
DISCLAIMER
Please be aware that this software may not be legal to operate
in some states and countries. We are providing this software and hardware to you
on the understanding that you are installing it as per the regulatory requirements of
your location and that you or your company are fully responsible for any legal
problems that may arise from operating this version of software and hardware

i
LAI GAMES NOTES
Dear Customer,
Keep up-to-date with any new Software release or Service Bulletins for
this Game.
Check our Website at www.laigames.com and click on Product Support,
here you will find links to all the Bulletins and Software Updates to keep
your game in top working order.
Thanks,

Operator's Manual –FireFighter
© LAI GAMES
i
TABLE OF CONTENTS
SAFETY PRECAUTIONS..........................................................................................1
INTRODUCTION .....................................................................................................2
SPECIFICATIONS....................................................................................................3
MACHINE INSTALLATION AND INSPECTION ...................................................4
ASSEMBLY INSTRUCTIONS.................................................................................5
WATER SYSTEM.....................................................................................................6
WATER SYSTEM DIAGRAM.................................................................................7
HOW TO PLAY.........................................................................................................8
OPERATION ...............................................................................................................9
OPERATIONAL DIAGRAM ..................................................................................9
ATTRACT MODE ..................................................................................................9
PLAY MODE..........................................................................................................9
TEST MODE ...........................................................................................................10
TEST MODE DIAGRAM .....................................................................................10
SOUND, LAMPS & DISPLAY TEST...................................................................11
SWITCH TEST.....................................................................................................11
RUN TEST............................................................................................................13
PROGRAMMABLE ADJUSTMENTS MODE......................................................14
PROGRAMMABLE ADJUSTMENTS MODE DIAGRAM...................................14
PROGRAMMABLE ADJUSTMENTS PROCEDURE .........................................14
PROGRAMMABLE ADJUSTMENTS QUICK REFERENCE TABLE................15
PROGRAMMABLE ADJUSTMENTS DETAILED..............................................16
AUDITS MODE ......................................................................................................18
AUDITS MODE DIAGRAM ................................................................................18
AUDIT PROCEDURE.........................................................................................19
AUDITS QUICK REFERENCE TABLE..............................................................20
AUDITS DETAILED............................................................................................21
GAME HISTORY MODE.......................................................................................24
GAME HISTORY MODE DIAGRAM..................................................................24
GAME HISTORY QUICK REFERENCE TABLE................................................24
GAME HISTORY PROCEDURE.........................................................................25
ERRORS AND TROUBLESHOOTING.................................................................26
FUSE INFORMATION...........................................................................................28
FUSE LOCATION DIAGRAM.............................................................................28
SECTION A: SERVICE INSTRUCTIONS ...........................................................29
LOCATING AND ACCESSING PARTS ...............................................................30

Operator's Manual –FireFighter
© LAI GAMES
ii
PARTS LOCATION DIAGRAM...........................................................................30
LOCATING AND ACCESSING PARTS...............................................................31
PARTS LOCATION DIAGRAM B .......................................................................31
PARTS DESCRIPTION........................................................................................32
LAMPS ....................................................................................................................34
MAINTENANCE ....................................................................................................35
SECTION B: TECHNICAL DETAILS...................................................................36
MAINS VOLTAGE ADJUSTMENT......................................................................37
TICKET DISPENSER REFERENCE GUIDE ........................................................39
BASIC OPERATION............................................................................................39
SPECIFICATIONS...............................................................................................41
TD-963CR SCHEMATIC DIAGRAM..................................................................42
DISPENSER PARTS DIAGRAM..........................................................................43
3DEXPLODE PARTS............................................................................................44
FIREFIGHTER MAIN WIRING DIAGRAM.........................................................49
FIREFIGHTER BASE WIRING DIAGRAM .........................................................50
FIREFIGHTER POWER WIRING DIAGRAM......................................................51

Operator's Manual –FireFighter
© LAI GAMES
Page 1
SAFETY PRECAUTIONS
The following safety precautions and advisories are used throughout this manual and
are defined as follows.
BE SURE TO READ THE FOLLOWING
* WARNING! *
Disregarding this text could result in serious injury.
* CAUTION! *
Disregarding this text could result in damage to the machine.
* WARNING! *
Always turn OFF Mains AC power and unplugged the game, before
opening or replacing any parts.
Always when unplugging the game from an electrical outlet, grasp the
plug, not the line cord.
Always connect the Game Cabinet to grounded electrical outlet with a
securely connected ground line.
Do Not install the Game Cabinet outdoors or in areas of high humidity,
direct water contact, dust, high heat or extreme cold.
Do Not install the Game Cabinet in areas that would present an
obstacle in case of an emergency, ie. near fire equipment or emergency
exits.
* NOTE! *
An advisory text to hint or help understanding.
* CAUTION! *
Always use a Digital Multimeter, logic tester or oscilloscope for testing
integrated circuit (IC) logic PC boards. The use of a continuity tester is
not permitted.
Do Not Connect or disconnect any of the integrated circuit (IC) logic PC
boards while the power is ON.
Do Not use any fuse that does not meet the specified rating.
Do Not Subject the game cabinet to extreme temperature variations.
Reliability of electrical components deteriorates rapidly over 60 oC.

Operator's Manual –FireFighter
© LAI GAMES
Page 2
INTRODUCTION
CONGRATULATIONS! You have just bought the “Fire Fighter”, another
sensational product from LAI GAMES. This game, based around the popular kids
water game style, has many new features. “Fire Fighter”features two player or single
player game play, an impressive main display, backlit targets, and robust and reliable
water Cannon guns. With its simple payout style, suited to children, we feel that “Fire
Fighter”will make a great game at any location, on or off site.
We hope you take the time to read this manual and learn about the many other features
and user-friendly adjustments that can be made to “fine-tune” the game for maximum
earning potential.
DESCRIPTION
The “Fire Fighter”is a one or two player, ticket redemption game, where players
attempt to beat their opponent (the second player in two player mode, a virtual
opponent if one player game) by putting out all the fires on the building levels. The
game also keeps an on-going score such that the first player to reach 99 points wins
the game.
PACKAGING
At delivery, the machine should arrive in good condition. To move the packaged
machine for transport or placement, use a forklift and take care not to hit the package
or stack heavy objects on top, as this may cause damage to the machine.
CONTENTS
The “Fire Fighter” lower cabinet
The “Fire Fighter” upper cabinet
Keys: 2 coin door keys
2 ticket door keys
2 back doors keys
2 ticket door keys
Operator‟s manual
IEC Power Cord (In cash box)
Parts & Accessories (In lower cabinet)

Operator's Manual –FireFighter
© LAI GAMES
Page 3
SPECIFICATIONS
DIMENSIONS
Weight: 240 kg (530lb) [Empty of water]
Height: 2049mm (80-6/8”)
Width: 1082mm (42-1/2”)
Length: 1615mm (63-1/2”)
Power: Maximum 660 W –(220V @ 3.0 A)(120V @ 5.5 A)
Average 380 W –(220V @ 1.8 A)(120V @ 3.2 A)
ELECTRIC SUPPLY
The game has the option to operate on a 110V, 120V, 220V or 240V AC 50/60Hz
single phase mains electric supply.
The supply must be a three wire grounded supply.
LOCATION REQUIREMENTS
Ambient temperature: between 5oC and 40oC.
Ambient humidity: Low
Ambient U.V. radiation: Very low
Vibrations level: Low
* CAUTION! *
Before switching the machine on be sure to check that it has been set on the
correct voltage for your area!
Please Refer to the mains voltage adjustment section of this manual on page 37.
Machines are normally shipped on 220V AC unless otherwise specified.

Operator's Manual –FireFighter
© LAI GAMES
Page 4
MACHINE INSTALLATION and INSPECTION
When installing and inspecting “Fire Fighter”, be very careful of the following points
and pay attention to ensure that the players can enjoy the game safely.
Be sure to turn the power OFF before working on the machine.
Make sure the power cord is not exposed on the surface (floor, ground, etc.) where
people walk through.
Check that the rubber glide feet levelers are set evenly on the floor so that the game
cabinet is unable to roll and is stable.
Always make complete connections for the integrated circuit (IC) logic PC Boards
and other connectors. Insufficient insertion can damage the electrical components.
Onlyqualified personnel should inspect or test the integrated circuit (IC) logic PC
Boards.
If any integrated circuit (IC) logic PC Boards should need servicing. Please contact
the nearest LAI GAMES distributor. (Refer to the back page of this manual)
* CAUTION! *
Before switching the machine on be sure to check that it has been set on the
correct voltage for your area!
Refer to the mains voltage adjustment section of this manual on page 37.
Machines are normally shipped on 220V AC unless otherwise specified.
* WARNING! *
Always Turn OFF mains power before removing safety covers and refit all safety
covers when work is completed.
* CAUTION! *
Water needs to be added to the game BEFORE running the pumps.
Prolonged dry running of the pumps can shorten their life.
See page 6 on how to fill and setup the water system.

Operator's Manual –FireFighter
© LAI GAMES
Page 5
ASSEMBLY INSTRUCTIONS
The “Fire Fighter” is shipped in two main sections, the Upper Cabinet, containing
most of the controlling electronics and the Lower Cabinet, containing the water system
and player controls. The game should not be shipped fully assembled as this could
cause damage to the Both Cabinets.
Position the Lower Cabinet nearby to its final location. The cabinet has four
heavy duty castors to allow easy repositioning of the game. Remove the four M12
x 80mm Bolts from the back mounting section and make sure it‟s clear of any
wires or obstructions.
Position the Upper Cabinet on the floor near the back of the Lower Cabinet
with the header facing the front. Unwrap and remove the back door of the Upper
Cabinet, this will give better grip when lifting the Upper Cabinet into place.
Using at least two persons, one at each side, lift the Upper Cabinet into position
on the Lower Cabinet. Using the four M12 x 80mm Bolts, mount the Upper
Cabinet tight to the Lower Cabinet.
Feed the Cables from the Upper Cabinet through the hole down into the Lower
Cabinet. Mate all the connectors together; they are keyed to prevent incorrect
connection. Remove the four Philip head screws from the red metal bracket just
above the Hydrant Targets. Position the Acrylic Splash Guard with the rubber
edging pressing up against the Display Glass and fit and tighten screws, don‟t
over tighten or it may crack the acrylic.
* CAUTION! *
Water needs to be added to the game BEFORE running the pumps.
Prolonged dry running of the pumps can shorten their life.
See page 6 on how to fill and setup the water system.
Upper
Cabinet
Lower
Cabinet
Splash
Guard
Mounting
Bolts
Cable
Connections

Operator's Manual –FireFighter
© LAI GAMES
Page 6
WATER SYSTEM
The “Fire Fighter” is a water style game and requires regular maintenance and
cleaning to keep the water in good condition. The game needs 20 liters (5 Gallons) of
water to operate effectively. The machine should be emptied of any water before
moving or shipping to prevent spillage. The two 12Volt DC Pumps are able to run dry
for short durations without damage should the game accidentally be run without water.
A Stainless Steel grill between the water catchment and the water tank prevents large
objects from blocking the plumbing. A water filter protects the two pumps from fine
particle damage. Refer the Water System Diagrams on page 7 for locating water system
components and valves.
FILLING MACHINE
Check that the Drain Stop Valve is in the closed position (See page 7). Use a
bucket or metered container to fill the tank with 20 liters (5 Gallons) of clean tap
water. Open the Main Stop Valve at the back of the machine and then press the
small red filter bleed button on the top of the Water Filter to fill the filter with
water.
PRIMING PUMPS & ADJUST PRESSURE
Check that both the Yellow Player and Blue Player Stop Valves are open. Use
the Run Test Mode on page 13 to activate both Water Pumps. Let the water run
for a while to remove all air from the plumbing. Then with the Yellow Player /
Blue Player Stop Valves, as shown in the Water System Diagrams on page 7.
Slowly close off each valve to reduce the Canon water pressure so that the
targets can be moved and activate the target lights but the water stream is not
splashing excessively.
CLEANING OPERATIONS
The “Fire Fighter” is fitted with a Wash-Down Gun to help in cleaning the water
catchment area. To activate the Wash-Down Gun, Use the Run Test Mode on
page 13 to activate Pump 2 only. Then open the Wash-Down Gun Stop Valve,
use the trigger on the Gun and direct the water where needed. Be careful not to
splash water outside the fiberglass catchment area. You can close the Blue Player
Stop Valve if need be, but you will have to adjust the Canon water pressure again
when finished.
EMPTING MACHINE
Close the Main Stop Valve and then place the Drain Pipe at the front of the
machine in a bucket or suitable container. The containers height must be no
higher then 400mm (15”) to allow the tank to gravity drain. Use the Drain Stop
Valve to prevent overfilling of the container. Repeat until all water is drained
from the machine.
* NOTE! *
The addition of a small amount of pool chlorine to the water is recommended
to kill any algae or other organisms introduced during filling.

Operator's Manual –FireFighter
© LAI GAMES
Page 7
WATER SYSTEM DIAGRAM
As viewed from front
As viewed from rear
Yellow Player
Targets
Blue Player
Targets
Yellow Player
Water Canon
Blue Player
Water Canon
Drain Stop
Valve
Wash-Down
Stop Valve
Blue Player
Stop Valve
Yellow Player
Stop Valve
VALVE CLOSED
VALVE OPEN
Blue Player
Reed Switches
Yellow Player
Reed Switches
Blue Player
Pump
Filter Bleed
Button
Yellow Player
Pump
Main Stop
Valve
Water Filter &
Cartridge

Operator's Manual –FireFighter
© LAI GAMES
Page 8
HOW TO PLAY
THE PLAYER’S AIM IS TO REACH THE 99 POINTS
FIRST BY AIMING THE WATER STREAM AT THE LIT
TARGETS INSIDE THE PLAYERS FIRE HYDRANT
Insert coin/s.
(The exact amount of coins per play is dependant on Program settings P1
through to P4. See program settings, page 14 for details).
For single player game, the player chooses to press ether the yellow or blue
player start button only. For a multi (two) player game both players must press
both the blue & yellow player start buttons together.
There is a brief build up period where the buildings are lit on fire. Then the
players fire hose(s) will start shooting water. Aim the stream of water at the
flashing targets inside the fire hydrant on your half of the playfield.
The fire in the building will start to reduce downwards while your score will
start rising as you hold your water stream on your targets.
(The exact amount of time you must hold your flashing targets in the active
position before a level of fire is turned off is controlled by P11. See Program
Settings, page 14 for details).
Once all the fires in the either building are put out (or the score reaches 99
points, as these always occur simultaneously) the game is then over. The side
that has put out all the levels (Or reached 99 points) is the winner.
(The skill level of the computer player in the one player game is controlled by
P12 setting. See Program Settings, page 14 for details).
Tickets are then dispensed.
(The amount of tickets is controlled by P7 through to P10. See Program
Settings, page 14 for details).
* NOTE! *
If the time out is reached then the side with the highest score is the winner.
(As set by P5, see Program settings Page 14 for details)
.

Operator's Manual –FireFighter
© LAI GAMES
Page 9
OPERATION
The “Fire Fighter”game has six operational modes: Attract mode, Play mode, Test
Mode, Programmable Adjustments Mode, Audits Mode and Game History Mode.
OPERATIONAL DIAGRAM
ATTRACT MODE
The Attract mode provides a light and sound display, while the game is not being
played. This feature is to attract potential customers to play the game. The attract
mode sound can be turned on and off
(Refer to programmable adjustment P07, see page 14 of this manual).
PLAY MODE
The Fire Fighter has two play modes. The Standard Coin Play mode, where a
coin, or coins are inserted. Or Free Play where no coins are necessary.
COIN PLAY
The Coin Play mode is entered from Attract mode, by inserting coins in any of the
two coin slots on the front of the machine cabinet, then following the instructions
in the “How to Play” section of this manual.
FREE PLAY
The free play mode is entered from attract mode by holding the Service button for
longer than five second,
F
r
r
E
will be displayed on the 3-digit LED display.
To get back to normal game Play mode Switch Off and On the Machine.
POWER UP
ATTRACT MODE
PLAY MODE
TEST MODE
PRESS TEST
AUDITS MODE
PRESS TEST
PROGRAMMABLE ADJUSTMENTS MODE
PRESS TEST
GAME HISTORY MODE
PRESS TEST
PRESS TEST
* NOTE! *
Entering test mode will
clear any stored credits

Operator's Manual –FireFighter
© LAI GAMES
Page 10
PROGRAMMABLE ADJUSTMENTS MODE
PLAY MODE
The Displays count,
the building lamps flash, all the other
lamps flash and sound is played
,
and.
ATTRACT MODE
1
1
9
9
1
9
0
0
C
0
1
C
0
2
C
1
2
C
-
1
3
0
0
0
0
1
r
r
R
r
R
r
0
4
r
R
PUMP MOTOR TEST
R01.Run yellow player water pump only
R02.Run blue player water pump only
R03.Run both yellow & blue player water pumps
R04.Both of water pumps OFF
TEST MODE
The Fire Fighter Test mode has Three Test Configurations allowing you to test the
function of the Sound, all Game Lamps, Displays, the Game Switches, Pump Motors
and the Water Cannon action. (Refer to the Test Mode Diagram below).
The Test mode is also used for Clearing Game Errors. If there is an active error, its
code will be displayed. To try to clear the error code, press the red test button once.
The error can be bypass by quickly pressing the red test button twice.
(For Game Errors codes, refer to page 26).
TEST MODE DIAGRAM
* NOTE! *
Entering Test Mode will CLEAR any CREDITS remaining in the game.
If during test mode no ADJUSTMENTS or actions are made to the game for
approximately four minutes, it will automatically RETURN to Attract Mode.
SOUND, LAMPS & DISPLAY TEST
No INPUT is active
TARGET 3
Blue Player active
TICKET notch
Yellow Player active
GAME SWITCHES TEST
TICKET notch
Blue Player active
TARGET 2
Blue Player active
To
RUN TEST MODE
PRESS TEST
PRESS TEST
SWITCH INPUT TEST
PRESS TEST
PRESS TEST
RUN TEST
PRESS
SERVICE
PRESS
SERVICE
REPEATEDLY
To step from
R01 to R04
Loops back
to R01

Operator's Manual –FireFighter
© LAI GAMES
Page 11
SOUND, LAMPS & DISPLAY TEST
ENTER The Sound, Lamp & Display test is entered from Attract mode by
pressing the test button once.
DURING THE TEST:
oGame music and a voice over will be played.
oThe backlighting of the buildings will light up level by level.
oAll the displays will count from 000 to 999 and then repeat.
oThe Yellow Player and Blue Player button lamps will flash on and off.
oThe target back lights will light up.
EXIT The Sound, Lamp & Display test is exited by pressing the test button.
The next test will be switch test.
SWITCH TEST
ENTER The Switch Test can be entered by pressing the Test button once while
in the Sound, Light & display test or by pressing the Test button twice
while in Attract mode,
C
X
X
will be displayed on the 3-digit display
where „XX‟ is a number representing the switch that is active.
TESTING THE GAME SWITCHES
All game switches have a code from C1 to C13 as tabled below. By
activating any of the switches, their code will be displayed on the 3-
digit display. If no switches are active then
C
0
0
will be displayed.
CODE
DISPLAY
SWITCH FUNCTION
SWITCH LOCATION
C0
C
0
0
No Switch Active
-
C1
C
0
1
Ticket Notch Yellow Player Active
Left Hand Ticket Door
C2
C
0
2
Ticket Notch Blue Player Active
Right Hand Ticket Door
C3
C
0
3
Service Switch Active
Service Panel
C4
C
0
4
Yellow Player Start Button Active
Control Panel
C5
C
0
5
Blue Player Start Button Active
Control Panel
C6
C
0
6
Coin 1 Switch Active
Coin Door
C7
C
0
7
Coin 2 Switch Active
Coin Door
C8
C
0
8
Target 1 Yellow Player Active
Cabinet Back
C9
C
0
9
Target 2Yellow Player Active
Cabinet Back
C10
C
1
0
Target 3 Yellow Player Active
Cabinet Back
C11
C
1
1
Target 1 Blue Player Active
Cabinet Back
C12
C
1
2
Target 2 Blue Player Active
Cabinet Back
C13
C
1
3
Target 3 Blue Player Active
Cabinet Back
Normal condition for the game is
C
0
1
and
C
0
2
indicating that the ticket
mechanism sensors are active
* NOTE! *
If there is an active error displayed, press the red test button once to try and
clear the error. If the error code will not clear, it can be bypass by quickly
pressing the red test button twice.
* NOTE! *
Several switches can be simultaneously activated in Switch test. The display
will then consecutively show their codes, indicating which switches are
active. However, it is much easier to test the game switches individually.

Operator's Manual –FireFighter
© LAI GAMES
Page 12
TICKET DISPENSER NOTCH
The Ticket Notch Switch (C1 & C2) can be activated or deactivated from the
Ticket Feed Button on the Ticket Dispenser PCB or by manually pushing the
tickets from the ticket holder through the dispenser after pulling the ticket release
rod upwards
EXIT The Switch Test is exited into Run Test Mode by pressing the Test
Button once.
Ticket Tensioning
mechanism
Ticket release rod
* NOTE! *
For more information on the servicing and testing the ticket
dispenser please look at the Dispenser Reference guide.

Operator's Manual –FireFighter
© LAI GAMES
Page 13
RUN TEST
ENTER The Run Test mode is entered from switch test by pressing the Test
button once or from Attract mode by pressing the Test button three
times. This will prompt the code
r
r
r
on the 3-digit display
indicating the program mode.
SELECT The Service button is pressed to step through each of the run test
modes, starting from the
r
0
1
display, R01 being the first step,
continuing through to R04, and then looping again from R01 to R04
until the mode is exited
EXIT The Run Test is exited into Programmable Adjustments Mode by
pressing the Test Button once.
CODE
DISPLAY
RUN TEST FUNCTION
R01
r
0
1
Run Yellow Player Water Pump
R02
r
0
2
Run Blue Player Water Pump
R03
r
0
3
Run Yellow & Blue Player Water Pumps
R04
r
0
4
Both Water Pumps inactive
* NOTE! *
If any of the games target sensors become active,
then the corresponding target‟s backlight will activate.

Operator's Manual –FireFighter
© LAI GAMES
Page 14
PRESS START
to change value
1, 2, 3, 4 … 10
P
0
1
P
P
P
1
3
P
1
5
PROGRAMMABLE ADJUSTMENTS MODE
The Fire Fighter has thirteen programmable adjustments that can be changed in this
mode. They are P01 to P13 and their codes and values are displayed alternatively
during the adjustment procedure.
Example: Code P01 (Number of Coins Mech 1) is displayed as
P
0
1
and its value
of 1as
1
on the 3-digit display.
PROGRAMMABLE ADJUSTMENTS MODE DIAGRAM
PROGRAMMABLE ADJUSTMENTS PROCEDURE
ENTER The Programmable Adjustments Mode can be entered by pressing the
Test button once while in the Run Test or by pressing the Test button
four times while in Attract mode,
P
P
P
will be displayed on the 3-
digit credit display.
SELECT The green Service button is pressed to step through each of the
adjustment configurations, starting from the
P
P
P
display, P01 being
the first step, continuing through to P13, and then looping again from
P01 to P13 until the mode is exited.
CHANGE The Yellow Player Start button is pressed to change the displayed
value. The value can only be stepped up by using the Start button, but
the value will loop back to its minimum value the next step after its
max value.
EXIT The Programmable Adjustments mode is exited into Audits mode, by
pressing the Test button once.
RUN TEST MODE
PRESS TEST
PROGRAMMABLE ADJUSTMENTS MODE
PRESS
SERVICE
PRESS
SERVICE
REPEATEDLY
To step from
P01 to P13
AUDIT MODE
PRESS TEST
* NOTE! *
Certain program adjustments have a fast adjustment feature.
By holding the Start button down, the values step through quicker.
Loops back to P01

Operator's Manual –FireFighter
© LAI GAMES
Page 15
PROGRAMMABLE ADJUSTMENTS QUICK
REFERENCE TABLE
CODE
PROGRAMMABLE
ADJUSTMENTS
OPTIONAL
VALUES
DEFAULT
SETTINGS
FEATURES
P01
1 –10
1, 2, 3…10
1
Coin Slot 1 –Coins / Credit
P02
1 –10
1, 2, 3…10
1
Coin Slot 1 –Games / Credit
P03
1 –10
1, 2,3 …10
1
Coin Slot 2 –Coins / Credit
P04
1 –10
1, 2,3 …10
1
Coin Slot 2 –Games / Credit
P05
30 –300
30,40,50…300
80
Maximum Game Time
P06
0n –Off
0n, Off
On
Attract Sound On/Off
P07
0–100
0, 1, 2, 3…100
12
Number of Tickets
Single Player Game Winner
P08
0–100
0, 1, 2, 3…100
6
Number of Tickets
Single Player Game Loser
P09
0–100
0, 1, 2, 3…100
18
Number of Tickets
Multi Player Game Winner
P10
0 –100
0, 1, 2, 3…100
10
Number of Tickets
Multi Player Game Loser
P11
1 –10
1, 1.5,2.5 …10
2.5
Seconds per Building Level
P12
1 –20
1, 2, 3, … 20
10
Computer Player Skill Level
P13
1 –10
1, 2, 3, … 10
5
Target Hardness Level
Note: All default settings are for an average of 11 tickets per game.