LAI Games Stacker User manual

► Read this manual BEFORE operating the machine.
► Keep this manual for your reference.
►Go to www.LAIGames.com click on Operator Access to register your
games and receive of future updates.
PLEASE NOTE:
© LAI Games
PRELIMINARY

Correspondence regarding this machine should be addressed to your
closest LAI Games office, or LAI Games Distributor.
For contact details, refer to the back page of this manual.
LAI Games
© LAI Games
Copyright Notice:
Authorization is hereby provided to you to copy this
manual in its entirety provided such copies are used for
non-commercial purposes and solely for use with
LAI Games products. This authorization is specifically
conditioned to include all legends, copyright, proprietary
and other notices which appear herein are unaltered on
any and all copies you make.
LAI Games
[email protected] www.laigames.com

Operator's Manual –Stacker Wall Street
© LAI GAMES
i
LAI Games Notes
Dear Customer,
Keep up to date with new software updates or Service Bulletins for this
game.
Check our Website at www.laigames.com and click on Product Support,
here you will find links to all the Bulletins and Software Updates to keep
your game in top working order.
Thanks,

Operator's Manual –Stacker Wall Street
© LAI GAMES
ii
TABLE OF CONTENTS
SAFETY PRECAUTIONS......................................................................................................1
MACHINE INSTALLATION AND INSPECTION............................................................2
INTRODUCTION ................................................................................................................3
SPECIFICATIONS ..............................................................................................................4
QUICK WALL INSTALLATION GUIDE.........................................................................5
HOW TO PLAY..................................................................................................................6
OPERATION............................................................................................................................7
OPERATIONAL DIAGRAM.............................................................................................7
ATTRACT MODE..............................................................................................................7
PLAY MODE......................................................................................................................7
FITTING PRIZES IN PRIZE COMPARTMENTS .............................................................8
TEST MODE.........................................................................................................................9
TEST MODE DIAGRAM...................................................................................................9
GAME SWITCHES ..........................................................................................................10
PROGRAMMABLE ADJUSTMENTS MODE..................................................................11
PROGRAMMABLE ADJUSTMENTS MODE DIAGRAM............................................11
PROGRAMMABLE ADJUSTMENTS PROCEDURE ...................................................11
PROGRAMMABLE ADJUSTMENTS QUICK REFERENCE TABLE V1.0.................12
PROGRAMMABLE ADJUSTMENTS DETAILED .......................................................13
AUDITS MODE..................................................................................................................19
AUDITS MODE DIAGRAM............................................................................................19
AUDIT PROCEDURE......................................................................................................20
AUDITS QUICK REFERENCE TABLE .........................................................................21
GAME HISTORY MODE.....................................................................................................22
GAME HISTORY MODE DIAGRAM.............................................................................22
GAME HISTORY PROCEDURE ....................................................................................22
GAME HISTORY QUICK REFERENCE TABLE..........................................................23
ERRORS AND TROUBLESHOOTING..............................................................................24
ERROR CODE QUICK REFERENCE TABLE...............................................................24
TROUBLESHOOTING GAME ERRORS.......................................................................25
SECTION A: SERVICE INSTRUCTIONS ........................................................................27
LOCATING AND ACCESSING PARTS.........................................................................28
LAMPS ................................................................................................................................30
MAINTENANCE................................................................................................................31
SECTION B: TECHNICAL DETAILS ...............................................................................32
MAINS VOLTAGE ADJUSTMENT................................................................................33

Operator's Manual –Stacker Wall Street
© LAI GAMES
iii
FB66 PINOUTS ................................................................................................................34
STACKER WALL STREET MAIN WIRING DIAGRAM............................................35
STACKER WALL STREET POWEROPTION.............................................................36

Operator's Manual –Stacker Wall Street
© LAI GAMES
Page 1
SAFETY PRECAUTIONS
The following safety precautions and advisories are used throughout this manual and
are defined as follows.
BE SURE TO READ THE FOLLOWING
* WARNING! *
Disregarding this text could result in serious injury.
* CAUTION! *
Disregarding this text could result in damage to the machine.
* WARNING! *
Always turn OFF Mains AC power and unplugged the game, before
opening or replacing any parts.
Always when unplugging the game from an electrical outlet, grasp the
plug, not the line cord.
Always connect the Game Cabinet to grounded electrical outlet with a
securely connected ground line.
Do Not installs the Game Cabinet outdoors or in areas of high
humidity, direct water contact, dust, high heat or extreme cold.
Do Not installs the Game Cabinet in areas that would present an
obstacle in case of an emergency, i.e. near fire equipment or emergency
exits.
* NOTE! *
Is an advisory text to hint or help understand more !.
* CAUTION! *
Always use a Digital Multimeter, logic tester or oscilloscope for testing
integrated circuit (IC) logic PC boards. The use of a continuity tester is
not permitted.
Do Not Connect or disconnect any of the integrated circuit (IC) logic PC
boards while the power is ON.
Do Not uses any fuse that does not meet the specified rating.
Do Not Subject the game cabinet to extreme temperature variations.
Reliability of electrical components deteriorates rapidly over 60 oC.

Operator's Manual –Stacker Wall Street
© LAI GAMES
Page 2
MACHINE INSTALLATION and INSPECTION
When installing and inspecting “Stacker Wall Street”, be very careful of the
following points and pay attention to ensure that the players can enjoy the game
safely.
Be sure to turn the power OFF before working on the machine.
Make sure the power cord is not exposed on the surface (floor, ground, etc.) where
people walk.
Check that the rubber glide feet levelers are set correctly on the floor so that the
game cabinet is level and stable.
Always make complete connections for the integrated circuit (IC) logic PC Boards
and other connectors. Insufficient insertion can damage the electrical
components.
Only qualified personnel should inspect or test the integrated circuit (IC) logic PC
Boards.
If any integrated circuit (IC) logic PC Boards should need servicing. Please
contact the nearest LAI Games Distributor. (Refer to the back page of this manual)
* CAUTION! *
Before Switching the machine on be sure to check that it has been set on the
correct voltage for your area!
Refer To the mains voltage adjustment section of this manual. Machines are
normally shipped on 220V AC unless otherwise specified.
* WARNING! *
Always Turn OFF mains power before removing safety covers and refit all safety
covers when work is completed.

Operator's Manual –Stacker Wall Street
© LAI GAMES
Page 3
INTRODUCTION
CONGRATULATIONS! On your purchase of “Stacker Wall Street”, it is another
great product from LAI GAMES .
We hope you take the time to read this manual and learn about the many other
features and user-friendly adjustments that can be made to “fine-tune” the game for
maximum earning potential.
DESCRIPTION
The “Stacker Wall Street”is a unique, wall-mounted Stacker ideal for locations
where space is at a premium such as bars, clubs, hotel lobbies, etc. The LED
playfield is surrounded by four secure prize compartments with auto-locking
doors. The stylish steel and tempered glass cabinet, engaging lighting and sound
effects, and appealing Stacker game play make Stacker Wall Street a profitable
way to utilize wall space..
PACKAGING
At delivery, the machine should arrive in good condition. To move the packaged
machine for transport or placement, use a forklift and take care not to hit the
package or stack heavy objects on top, as this may cause damage to the machine.
CONTENTS
The “Stacker Wall Street” cabinet
Keys: 2 x coin door keys
2 x back door keys
2 x ticket door key
Operator‟s manual
IEC Power Cord (In cash box)
Parts & Accessories (In cash box)

Operator's Manual –Stacker Wall Street
© LAI GAMES
Page 4
SPECIFICATIONS
DIMENSIONS
Weight: 90 kg (198 lb)
Height: 940 mm (37”)
Width: 420 mm (16 1/2”)
Length: 720 mm (28.3”)
Power: Maximum 250 W –(220V @ 1.2A)(120V @2.5 A)
ELECTRIC SUPPLY
The game has the option to operate on an 110V, 120V, 220V or 240V AC 50/60Hz
single phase mains electric supply.
The supply must be a three wire grounded supply.
LOCATION REQUIREMENTS
Ambient temperature: between 5oC and 40oC.
Ambient humidity: Low
Ambient U.V. radiation: Very low
Vibrations level: Low
* CAUTION! *
Before switching the machine on be sure to check that it has been set on the
correct voltage for your area!
Please Refer to the mains voltage adjustment section of this manual. Machines are
normally shipped on 220V AC unless otherwise specified.

Operator's Manual –Stacker Wall Street
© LAI GAMES
Page 5
QUICK WALL INSTALLATION GUIDE

Operator's Manual –Stacker Wall Street
© LAI GAMES
Page 6
HOW TO PLAY
PLAYERS AIM TO BUILD A VERTICAL STACK OF
BLOCKS TO WIN PRIZES
. Press the Start/Stop button to start a game;
Press the Start/Stop button to stop the moving blocks at the desired position;
Build the stack of blocks by stopping each level of blocks on top of each other;
Players win a prize when top level is reached;
Game ends any time the player fails to stop the moving blocks at a position directly
above the block/blocks on the previous level.
Prize Selection
Once you have won a prize, press the select button to step through the Prize Doors
Press the Start/Stop button to dispense a prize from the selected prize door.
Note : Staying Blocks Lost Blocks
Perfect
Perfect Not bad
Not bad Missed
Game over
Missed
Game over

Operator's Manual –Stacker Wall Street
© LAI GAMES
Page 7
OPERATION
The “Stacker Wall Street” game has five operational modes: Attract mode, Play
mode, Test mode, Programmable Adjustments Mode and Audits Mode.
OPERATIONAL DIAGRAM
ATTRACT MODE
The Attract mode provides a light and sound display, while the game is not being
played. This feature is to attract potential customers to play the game. The attract
mode sound can be turned on and off
(Refer to programmable adjustment page of this manual).
PLAY MODE
The “STACKER WALL STREET”has two play modes. The Standard Coin Play
mode, where a coin, or coins are inserted. Or Free Play where no coins are
necessary.
COIN PLAY
The Coin Play mode is entered from Attract mode, by inserting coins in any of the
two coin slots on the front of the machine cabinet, then following the instructions
in the “How to Play” section of this manual.
FREE PLAY
The free play mode is entered from attract mode by holding the Service button for
longer than five second,
F
r
E
will be displayed on the 3-digit LED display.
For a single free game, just press the Service button once. When issuing single
free games in this manner, Prizes can be won as normal.
POWER UP
ATTRACT MODE
PLAY MODE
TEST MODE
PRESS TEST
AUDITS MODE
PRESS TEST
PROGRAMMABLE ADJUSTMENTS MODE
PRESS TEST
PRESS TEST
* NOTE! *
Entering test mode will
clear any stored credits

Operator's Manual –Stacker Wall Street
© LAI GAMES
Page 8
FITTING PRIZES IN PRIZE
COMPARTMENTS
Access to the prize doors can be done by pressing and Holding both the Red
Test Button and Green Service button for a few seconds. These buttons
are mounted on the service panel beside the Cashbox. This access‟s the Prize door
access mode. Once this is accessed uses the “Select” button on the player control panel
to step through the prize door you want to unlock and open, the lights on the prize door
will light up so you know which one is selected. Press the Start/Stop button to unlock
the prize door, pressing the Start/Stop button again will lock the prize door. Please note
all prize doors will lock after leaving this mode.
SERVICE
TEST
Door Lock Status LED (Red)
Door Unlock Status LED (Green)

Operator's Manual –Stacker Wall Street
© LAI GAMES
Page 9
PROGRAMMABLE ADJUSTMENTS MODE
PLAY MODE
The Display counts,
all Lamps are flashing
and Sound is played
ATTRACT MODE
1
1
1
9
9
9
C
0
0
C
0
C
0
3
0
0
0
0
1
9
1
C
1
2
0
TEST MODE
The “Stacker Wall Street”Test mode has Three Test Configurations allowing you to
explore the functioning of the Sound, Light & Display, and the Game Switches and to
allow an operational test. The Test mode is also used for Clearing Game Errors. If
there is an active error, its code will be displayed. To try to clear the error code, press
the red test button once. The error can be bypass by quickly pressing the red test
button twice.
TEST MODE DIAGRAM
* NOTE! *
Entering Test Mode will CLEAR any CREDITS remaining in the game.
If during test mode no ADJUSTMENTS or actions are made to the game for
approximately four minutes, it will automatically RETURN to Attract Mode.
SOUND, LAMPS & DISPLAY TEST
No INPUT is active
Door 4 Lock active
Coin 1 Active
Coin 2 Active
To
PRESS TEST
PRESS TEST
SWITCH INPUT TEST
PRESS TEST

Operator's Manual –Stacker Wall Street
© LAI GAMES
Page 10
GAME SWITCHES
All game switches have a code from C1 to C13 as tabled below. By activating any of
the switches, their code will be displayed on the 4-digit display. If there are no
switches active, C - 00 be displayed.
If several switches are activated simultaneously, the display will consecutively show
their codes, indicating which switches are active.
CODE
DISPLAY
SWITCH FUNCTION
SWITCH LOCATION
C0
C
-
0
0
No Switch Active
-
C1
C
-
0
1
Coin 1 Active
Coin
C2
C
-
0
2
Coin 2 Active
Coin/DBA
C3
C
-
0
3
Service Button Active
Service Panel
C4
C
-
0
4
Select Button Active
Control Panel
C5
C
-
0
5
Start Button Active
Control Panel
C6
C
-
0
6
Door 1 Unlock Switch active
Door 1
C7
C
-
0
7
Door 2 Unlock Switch active
Door 2
C8
C
-
0
8
Door 3 Unlock Switch active
Door 3
C9
C
-
0
9
Door 4 Unlock Switch active
Door 4
C10
C
-
1
0
Door 1 Lock Switch active
Door 1
C11
C
-
1
1
Door 2 Lock Switch active
Door 2
C12
C
-
1
2
Door 3 Lock Switch active
Door 3
C13
C
-
1
3
Door 4 Lock Switch active
Door 4

Operator's Manual –Stacker Wall Street
© LAI GAMES
Page 11
PRESS START
to change value
1, 2, 3, 4 … 10
0
1
P
P
P
P
P
1
8
P
1
O
N
PROGRAMMABLEADJUSTMENTS MODE
The Stacker Wall Street has eighteen programmable adjustments that can be changed
in this mode. They are P01 to P18 and their codes and values are displayed
alternatively during the adjustment procedure.
Example: Code P01 (Number of Coins Mechanical 1) is displayed as
P
0
1
and
its value of 1as
1
on the 4-digit display.
PROGRAMMABLE ADJUSTMENTS MODE DIAGRAM
PROGRAMMABLE ADJUSTMENTS PROCEDURE
ENTER The Programmable Adjustments Mode can be entered by pressing the
Test button once while in the Run Test or by pressing the Test button
four times while in Attract mode,
P
P
P
P
will be displayed on the 4-
digit credit display.
SELECT The green Service button is pressed to step through each of the
adjustment configurations, starting from the
P
P
P
P
display, P01
being the first step, continuing through to P18, and then looping again
from P01 to P18 until the mode is exited.
CHANGE The Start/Stop button is pressed to change the displayed value. The
value can only be stepped up by using the Start button, but the value
will loop back to its minimum value the next step after its max value.
EXIT The Programmable Adjustments mode is exited into Audits mode, by
pressing the Test button once.
RUN TEST MODE
PRESS TEST
PROGRAMMABLE ADJUSTMENTS MODE
PRESS
SERVICE
PRESS
SERVICE
REPEATEDLY
To step from
P01 to P18
AUDIT MODE
PRESS TEST
* NOTE! *
Certain program adjustments have a fast adjustment feature. By holding the
Start/Stop button down, the values step through quicker.
Loops back to P01

Operator's Manual –Stacker Wall Street
© LAI GAMES
Page 12
PROGRAMMABLE ADJUSTMENTS QUICK
REFERENCE TABLE V1.0
CODE
PROGRAMMABLE
ADJUSTMENTS
OPTIONAL VALUES
DEFAULT
SETTINGS
FEATURES
P01
1 –20
1, 2, 3…20, Free
1
Coin 1 –Coins / Credit
P02
1 –10
1, 2, 3…10
1
Coin 1 –Games / Credit
P03
ON or OFF
ON or OFF
OFF
Activate Multiple Bonus Pricing Coin slot 1
P03-1
OFF –99
OFF,1,2,3,4…99
OFF
Coin 1
Number Coins for Bonus Pricing level 1
P03-2
OFF –99
OFF,1,2,3,4….99
OFF
Coin1
Number of bonus credits on Pricing level 1
P03-3
OFF –99
OFF,1,2,3,4….99
OFF
Coin1
Number Coins for Bonus Pricing level 2
P03-4
OFF –99
OFF,1,2,3,4….99
OFF
Coin 1
Number of bonus credits on Pricing level 2
P03-5
OFF –99
OFF,1,2,3,4….99
OFF
Coin 1
Number Coins for Bonus Pricing level 3
P03-6
OFF –99
OFF,1,2,3,4….99
OFF
Coin 1
Number of bonus credits on Pricing level 3
P04
1 –20
1, 2, 3…20
1
Coin 2 –Coins / Credit
P05
1 –10
1, 2, 3…10
1
Coin 2 –Games / Credit
P06
ON or OFF
ON or OFF
OFF
Activate Multiple Bonus Pricing Coin slot 2
P06-1
OFF –99
OFF,1,2,3,4…99
OFF
Coin 2
Number Coins for Bonus Pricing level 1
P06-2
OFF –99
OFF,1,2,3,4….99
OFF
Coin 2
Number of bonus credits on Pricing level 1
P06-3
OFF –99
OFF,1,2,3,4….99
OFF
Coin 2
Number Coins for Bonus Pricing level 2
P06-4
OFF –99
OFF,1,2,3,4….99
OFF
Coin 2
Number of bonus credits on Pricing level 2
P06-5
OFF –99
OFF,1,2,3,4….99
OFF
Coin 2
Number Coins for Bonus Pricing level 3
P06-6
OFF –99
OFF,1,2,3,4….99
OFF
Coin 2
Number of bonus credits on Pricing level 3
P07
ON or OFF
ON or OFF
ON
Attract Mode Sound
P08
1 –5
0, 1, 2,3,4,5
3
Cube Speed Level
P09
1 –1200
1 - 25 (1), 30 –200
(5) and 225 –1200
(25)
100
Average Win Difficulty adjustment
P10
ON or OFF
ON or OFF
OFF
Prizes in free play
P11
ON or OFF
ON or OFF
ON
Prize Door 1 Status
P12
ON or OFF
ON or OFF
ON
Prize Door 2 Status
P13
ON or OFF
ON or OFF
ON
Prize Door 3 Status
P14
ON or OFF
ON or OFF
ON
Prize Door 4 status
P15
1 –3
1,2,3
1
Prize door tries
P16
ON or OFF
ON or OFF
ON
Attract animation Strobing Display
P17
1 - 4
1,2,3,4
1
Error Message Option
P18
ON or OFF
ON or OFF
ON
Common Coin Option

Operator's Manual –Stacker Wall Street
© LAI GAMES
Page 13
PROGRAMMABLE ADJUSTMENTS DETAILED
P01 = COIN 1: NUMBER OF COINS PER CREDIT
(Default 01) (Adjustable 1 –20)
This sets the number of coins that need to be inserted into coin mechanism 1, for
each credit. It can be set between 1 to 20 coins for one credit. The default setting
is “1”.
P02 = COIN 1: NUMBER OF GAME PLAYS PER CREDIT
(Default 01) (Adjustable 1 –10)
This sets the number of games for each credit inserted into coin mechanism 1. It
can be set between 1 to 10 plays for each credit. The default setting is “1”.
P03 = COIN 1: ACTIVATE MULTIPLE BONUS PRICING
(Default OFF) (Adjustable ON –OFF)
Note: Settings P 03 and P 03-1 thru to P03-6 are only used for the setting of
Bonus credit levels e.g. $0.50c/1 play, $1/3plays, $2/7plays, $5/20 plays
This turns on the multiple bonus credit system and activates the settings for up to
3 bonus levels on coin mechanism 1. It can be set to ON or OFF. The default
setting is “OFF” this mean the multiple bonuses is disabled, if the setting is
changed to ON the multiple bonus setting will be active and open the next sub-
menu P03-1 and so on.
P03 - 1 = COIN 1: NUMBER OF COINS REQUIRED TO
REACH BONUS CREDIT LEVEL 1
(Default OFF) (Adjustable OFF –99)
This sets the number of coins (or Bill Acceptor pulses) that need to be inserted
into coin mechanism 1 to reach the bonus credit level 1. It can be set to either OFF
for no bonus or 1 to 99 coins, (OFF=No bonus), the default setting is “OFF” this
means that the P03-2 will not open
Examples
(Base price $0.25c)
(Base Price $0.50c
(Base Price $0.50c)
(Base Price $1.00)
P Setting
Adjustment
1 play $ 0.25c
1 play $ 0.50c
1 play $ 0.50c
1 play $ 1.00
3 plays $ 0.50c
3 plays $ 1.00
3 plays $ 1.00
3 plays $ 2.00
7 plays $ 1.00
7 plays $ 2.00
8 plays $ 2.00
8 plays $ 5.00
($0.25c coins or
DBA set on $0.25c
pulses)
($0.25c coins or
DBA set on $0.25c
pulses)
22 plays $ 5.00
18 plays $ 10.00
($0.25c coins or
DBA set on $0.25c
pulses)
($0.25c coins or
DBA set on $0.25c
pulses)
P01 / P04
1
2
2
4
P02 / P05
1
1
1
1
P03 / P06
ON
ON
ON
ON
P3-1 / P6-1
2
4
4
8
P3-2 / P6-2
1
1
1
1
P3-3 / P6-3
4
8
8
20
P3-4 / P6-4
3
3
4
3
P3-5 / P6-5
OFF
OFF
20
40
P3-6 / P6-6
OFF
OFF
12
8

Operator's Manual –Stacker Wall Street
© LAI GAMES
Page 14
P03 - 2 = COIN 1: NUMBER OF BONUS CREDITS GIVEN AT
BONUS LEVEL 1
(Default OFF) (Adjustable OFF –99)
This sets the number of bonus credits that are given when credit Level 1 is
reached. This Bonus amount is the additional number of credits required above
the base price. It can be set to either OFF, or between 1 to 99 bonus credits; the
default setting is “OFF” this mean that the P03-3 will not open.
Note: The Base Price is the normal price setting for one game.
e.g. If the game is set for $0.25c/1play then the base price is $0.25c, if the game is
set for $0.50c/1play then the base price is $0.50c, if the game is set for
$1.00/1play then the base price is $1.00.
P03 - 3= COIN 1: NUMBER OF COINS REQUIRED TO
REACH BONUS CREDIT LEVEL 2
(Default OFF) (Adjustable OFF –99)
This sets the number of coins (or Bill Acceptor pulses) that is needed to be
inserted into coin mechanism 1 to reach the bonus credit level 2. It can be set to
OFF for no bonus or between 1 to 99 coins, but the setting value must be higher
than setting value of P03-1, the default setting is “OFF” and if set to OFF this
means that the P03-4 will not open.
P03 - 4 = COIN 1: NUMBER OF BONUS CREDITS GIVEN AT
BONUS LEVEL 2
(Default OFF) (Adjustable OFF –99)
This sets the number of bonus credits that are given when credit Level 2 is
reached. This Bonus amount is the additional number of credits required above
the base price. It can be set to either OFF, or between 1 to 99 bonus credits; the
default setting is “OFF” this mean that the P03-5 will not open.
P03 - 5= COIN 1: NUMBER OF COINS REQUIRED TO
REACH BONUS CREDIT LEVEL 3
(Default OFF) (Adjustable OFF –99)
This sets the number of coins (or Bill Acceptor pulses) that is needed to be
inserted into coin mechanism 1 to reach the bonus credit level 3. It can be set to
OFF for no bonus or between 1 to 99 coins, but the setting value must be higher
than setting value of P03-3, the default setting is “OFF” and if set to OFF this
mean that the P03-6 will not open.
P03 - 6 = COIN 1: NUMBER OF BONUS CREDITS GIVEN AT
BONUS LEVEL 3
(Default OFF) (Adjustable OFF –99)
This sets the number of bonus credits that are given when credit Level 3 is
reached. This Bonus amount is the additional number of credits required above
the base price. It can be set to either OFF, or between 1 to 99 bonus credits; the
default setting is “OFF”

Operator's Manual –Stacker Wall Street
© LAI GAMES
Page 15
P04 = COIN 2: NUMBER OF COINS PER CREDIT
(Default 01) (Adjustable 1 –20)
This sets the number of coins that need to be inserted into coin mechanism 2, for
each credit. It can be set between 1 to 20 coins for one credit. The default setting
is “1”.
P05 = COIN 2: NUMBER OF GAME PLAYS PER CREDIT
(Default 01) (Adjustable 1 –10)
This sets the number of games for each credit inserted into coin mechanism 2. It
can be set between 1 to 10 plays for each credit. The default setting is “1”.
P06 = COIN 2: ACTIVATE MULTIPLE BONUS PRICING
(Default OFF) (Adjustable ON –OFF)
Note: Settings P 06 and P 06-1 thru to P06-6 are only used for the setting of
Bonus credit levels e.g. $0.50c/1 play, $1/3plays, $2/7plays, $5/20 plays
This turns on the multiple bonus credit system and activates the settings for up to
3 bonus levels on coin mechanism 2. It can be set to ON or OFF. The default
setting is “OFF” this mean the multiple bonuses is disabled, if the setting change
to ON the multiple bonus setting will be active and open the next sub-menu P06-
1and so on.
P06 - 1 = COIN 2: NUMBER OF COINS REQUIRED TO
REACH BONUS CREDIT LEVEL 1
(Default OFF) (Adjustable OFF –99)
This sets the number of coins (or Bill Acceptor pulses) that need to be inserted
into coin mechanism 2 to reach the bonus credit level 1. It can be set to either OFF
for no bonus or 1 to 99 coins, (OFF=No bonus), the default setting is “OFF” this
means that the P06-2 will not open
P06 -2 = COIN 2: NUMBER OF BONUS CREDITS GIVEN AT
BONUS LEVEL 1
(Default OFF) (Adjustable OFF –99)
This sets the number of bonus credits that are given when credit Level 1 is
reached. This Bonus amount is the additional number of credits required above
the base price. It can be set to either OFF, or 1 to 99 bonus credits; the default
setting is “OFF” this mean that the P06-3 will not open.
Note: The Base Price is the normal price setting for one game.
e.g. If the game is set for $0.25c/1play then the base price is $0.25c, if the game is
set for $0.50c/1play then the base price is $0.50c, if the game is set for
$1.00/1play then the base price is $1.00,
P06 –3= COIN 2: NUMBER OF COINS REQUIRED TO
REACH BONUS CREDIT LEVEL 2
(Default OFF) (Adjustable OFF –99)
This sets the number of coins (or Bill Acceptor pulses) that is needed to be
inserted into coin mechanism 2 to reach the bonus credit level 2. It can be set to
OFF for no bonus or between 1 to 99 coins, but the setting value must be higher
than setting value of P06-1, the default setting is “OFF” and if set to OFF this
means that the P06-4 will not open.