LAI Games SNAPSHOT 2 BOOTH User manual

Page | 1
OPERATORS MANUAL
Version 14
SNAPSHOT 2 BOOTH
Software Version 3.3
PLEASE NOTE
Read this manual before operating the machine.
Visit www.laigames.com for support.

Page | 2
Correspondence regarding this machine should be addressed to
your closest LAI Games office, or LAI Games Distributor.
For contact details, refer to the back page of this manual.
© LAI Games
Copyright Notice:
Authorization is hereby provided to you to copy this manual in its
entirety provided such copies are used for non-commercial
purposes and solely for use with LAI Games products. This
authorization is specifically conditioned to include all legends,
copyright, proprietary and other notices which appear herein are
unaltered on any and all copies you make.

Page | 3
Table of Contents
SAFETY PRECAUTIONS.............................................................................................................................6
MACHINE INSTALLATION AND INSPECTION ...........................................................................................7
INTRODUCTION...................................................................................................................................8
DESCRIPTION.......................................................................................................................................8
SNAPSHOT 2 COMPANION APP ......................................................................................................8
AUTOMATIC UPDATES ....................................................................................................................8
PACKAGING.............................................................................................................................................8
CONTENTS...........................................................................................................................................8
SPECIFICATIONS ..................................................................................................................................8
DIMENSIONS ...................................................................................................................................8
ELECTRIC SUPPLY.............................................................................................................................8
ASSEMBLY .......................................................................................................................................9
GAMEPLAY AND MODES...................................................................................................................11
HOW TO PLAY ...............................................................................................................................11
ATTRACT MODE ............................................................................................................................11
PLAY MODE ...................................................................................................................................11
OPERATION ...........................................................................................................................................12
OPERATOR MENU GUIDE..................................................................................................................12
INITIAL SETUP PROCEDURE...............................................................................................................13
GAME SETTINGS................................................................................................................................14
COIN SETTINGS..............................................................................................................................14
BONUS CREDITS ............................................................................................................................15
FREE PLAY SETTINGS .....................................................................................................................15
SOUND SETTINGS..........................................................................................................................15
EVENT SETTINGS ...........................................................................................................................16
FOOTER LOGOS .............................................................................................................................17
MANAGE CONTENT.......................................................................................................................17
AUDITS ..............................................................................................................................................18
INPUT AND OUTPUT TESTS...............................................................................................................19
LAMP TESTS...................................................................................................................................19
INPUT TESTS..................................................................................................................................19
AUDIO TESTS .................................................................................................................................19
GAME HISTORY .................................................................................................................................19
PHOTO UPLOAD QUEUE................................................................................................................19
UPLOADED PHOTOS......................................................................................................................20
PRINT HISTORY..............................................................................................................................20

Page | 4
ERRORS..............................................................................................................................................21
CURRENT ERRORS .........................................................................................................................24
ERROR HISTORY ............................................................................................................................24
ERROR SETTINGS...........................................................................................................................24
PRINTER INFORMATION....................................................................................................................24
SYSTEM SETTINGS.............................................................................................................................25
PHOTO STORAGE ..........................................................................................................................25
SCREEN CALIBRATION...................................................................................................................25
CAMERA ALIGNMENT ...................................................................................................................25
TIME AND DATE SETTINGS............................................................................................................25
LANGUAGE........................................................................................................................................25
SOFTWARE UPDATES ........................................................................................................................25
VIEW CHANGE LOG .......................................................................................................................25
SETUP PROCEDURE .......................................................................................................................26
SYSTEM DIAGNOSTICS ......................................................................................................................26
COPY LOGS ....................................................................................................................................26
UPLOAD LOGS ...............................................................................................................................26
CHANGE BOOTH TYPE...................................................................................................................26
NETWORK SETTINGS.........................................................................................................................26
AUTOMATIC UPDATES ..................................................................................................................26
CONNECT TO A NETWORK ............................................................................................................27
TEST CONNECTION........................................................................................................................27
VERIFY THE CONNECTION.............................................................................................................27
TROUBLESHOOTING......................................................................................................................28
CREATING A BOOTABLE USB.................................................................................................................29
THINGS YOU WILL NEED ...................................................................................................................29
INSTRUCTIONS ..................................................................................................................................29
UPDATING A CABINET USING A BOOTABLE USB ..................................................................................30
SECTION A: SERVICE INSTRUCTIONS.....................................................................................................31
LOCATING AND ACCESSING PARTS.......................................................................................................31
CABINET REAR...............................................................................................................................31
OPERATOR PANEL –SERVICE CONTROLS......................................................................................32
MONITOR CONTROLS....................................................................................................................32
PARTS DESCRIPTION .........................................................................................................................33
SPEAKERS ......................................................................................................................................33
COUNTERS.....................................................................................................................................33
BUTTONS.......................................................................................................................................33

Page | 5
VOLUME KNOB..............................................................................................................................33
POWER INLET/MAINS SWITCH......................................................................................................33
POWER SUPPLY .............................................................................................................................33
PRINTER TROUBLESHOOTING...........................................................................................................34
PAPER JAMS ..................................................................................................................................34
LED STATUS INDICATOR................................................................................................................34
LAMPS ...............................................................................................................................................35
COIN DOOR LAMPS (LED)..............................................................................................................35
BUTTON LAMPS (LED) ...................................................................................................................35
BOOTH LIGHTING (LED).................................................................................................................35
MAINTENANCE..................................................................................................................................35
EXTERIOR.......................................................................................................................................35
INTERIOR.......................................................................................................................................35
PRINTER.........................................................................................................................................36
SECTION B: TECHNICAL DETAILS ...........................................................................................................37
POWER SUPPLY.................................................................................................................................37
COIN OPTIONS REFERENCE GUIDE....................................................................................................38
CARD SYSTEM REFERENCE GUIDE.....................................................................................................38
SECURITY DONGLE ............................................................................................................................39
QUIXANT QXi-200 .............................................................................................................................39
USB PORT CONNECTIONS .................................................................................................................40
FB194 CONNECTOR WIRING .............................................................................................................40
FUSES ............................................................................................................................................40
CONNECTORS................................................................................................................................41
J1 –Indicators ...............................................................................................................................41
J2 –Quixant I/O.............................................................................................................................41
J3 –Quixant I/O.............................................................................................................................41
J5 –Quixant I/O.............................................................................................................................41
J8 –Counter/Meter Connection ....................................................................................................41
J9 –Power Input............................................................................................................................42
J11 –Indicator...............................................................................................................................42
P1 –Game Inputs ..........................................................................................................................42
WIRING DIAGRAMS...............................................................................................................................42

Page | 6
SAFETY PRECAUTIONS
The following safety precautions and advisories are used throughout this manual and are defined as
follows.
BE SURE TO READ THE FOLLOWING
* WARNING! *
Disregarding this text could result in serious injury.
* CAUTION! *
Disregarding this text could result in damage to the machine.
* NOTE! *
Is an advisory text to hint or help understand.
* WARNING! *
Always turn OFF Mains AC power and unplug the game before opening or replacing
any parts.
Always grasp the plug, not the line cord, when unplugging the game from an
electrical outlet.
Always connect the Game Cabinet to a grounded electrical outlet with a securely
connected ground line.
Do Not install the Game Cabinet outdoors or in areas of high humidity, direct water
contact, dust, high heat or extreme cold.
Do Not install the Game Cabinet in areas that would present an obstacle in case of an
emergency, i.e. near fire equipment or emergency exits.
* CAUTION! *
Always use a Digital Multimeter, logic tester or oscilloscope for testing integrated
circuit (IC) logic PC boards. The use of a continuity tester is not permitted.
Do Not connect or disconnect any of the integrated circuit (IC) logic PC boards while
the power is ON.
Do Not use any fuse that does not meet the specified rating.
Do Not subject the game cabinet to extreme temperature variations. Reliability of
electrical components deteriorates rapidly over 60 oC.

Page | 7
MACHINE INSTALLATION AND INSPECTION
When installing and inspecting Snapshot 2, be very careful of the following points and pay attention
to ensure that the players can enjoy the game safely.
•Be sure to turn the power OFF before working on the machine.
•Make sure the power cord is not exposed on the surface (floor, ground, etc.) where people walk.
•Check that the rubber glide feet levelers are set correctly on the floor so that the game cabinet is
level and stable.
•Always make complete connections for the integrated circuit (IC) logic PC Boards and other
connectors. Insufficient insertion can damage the electrical components.
•Only qualified personnel should inspect or test the integrated circuit (IC) logic PC Boards.
•If any integrated circuit (IC) logic PC Boards should need servicing, please contact the nearest
LAI Games Distributor. (Refer to the back page of this manual)
* CAUTION! *
Before Switching the machine on be sure to check that it has been set on the correct
voltage for your area!
Refer To the mains voltage adjustment section of this manual. Machines are normally
shipped on 220V AC unless otherwise specified.
* WARNING! *
Always Turn OFF mains power before removing safety covers and refit all safety covers
when work is completed.

Page | 8
INTRODUCTION
Congratulations on your purchase of Snapshot 2 by LAI Games. We hope you take the time to read
this manual and learn about the many features and user-friendly adjustments that can be made to
fine-tune the game for maximum earning potential.
DESCRIPTION
Snapshot 2 is a photo booth with dual cameras and mobile integration that lets the players choose
which game mode they want to play, and offers a variety of photo decoration options unique to
each mode. The Snapshot 2 Companion app is available on both iOS and Android as a companion
app to the Snapshot 2 photo booth.
SNAPSHOT 2 COMPANION APP
Using the Snapshot mobile app, players are able to transfer photos between the booth and their
mobiles allowing them to share images with an unlimited number of social networks and
applications, as well as import and print any photo from their mobile.
AUTOMATIC UPDATES
Snapshot 2 has a fully automatic updating system when the game has an internet connection.
Connect your booth to the internet to take advantage of this feature, or see the Software Updates
menu section of this manual for more information.
PACKAGING
CONTENTS
•The Snapshot 2 booth
•Operator Manual
•1 x USB (preloaded with game system image)
•2 x coin door keys
•IEC Power Cord
•Parts & Accessories
SPECIFICATIONS
DIMENSIONS
•Weight: 245kg (540.1lb) (excluding packaging)
•Weight: 250kg (573.2lb) (including packaging)
•Height: 1997.6mm (78.6”) (including header)
•Height: 1821mm (71.7”) (excluding header)
•Width: 1019mm (40.1”)
•Length: 1369.6mm (53.9”)
•Cabinet Power: Maximum 350W
•Printer Power: Maximum 350W
ELECTRIC SUPPLY
The game can operate on a universal mains input voltage between 88-264VAC 50/60Hz single phase.
The supply must be a three wire grounded supply.
An adjustment screw is available for fine-tuning the output voltage.

Page | 9
LOCATION REQUIREMENTS
•Ambient temperature: 5C - 40C
•Ambient humidity: Low
•Ambient U.V. radiation: Very low
•Vibrations level: Low
ASSEMBLY
EXTENDING THE CABINET
•Remove two the bolts on the floor and two bolts on ceiling as pictured above.
•Pull the back of the cabinet away from the rest of the cabinet.
BH L M5 X 20 mm (4x)
Lock washer M5
(4x)
Plate washer M5
(4x)

Page | 10
•
•When the cabinet is fully extended, refasten the four bolts that were removed in the
previous step.
BH L M5 X 20 mm (4x)
Lock washer M5
(4x)
Plate washer M5
(4x)

Page | 11
GAMEPLAY AND MODES
HOW TO PLAY
•Pay to play
•Select a game mode
•Take your photos (in masquerade mode, decorations are picked first)
•Decorate your photos
•Choose your print layout (upsell available here, if option enabled in Coin Settings)
•Collect your photos
OR
•Pay to play
•Log in using the Snapshot app
•Select two photos from your account
•Decorate your photos
•Choose your print layout
•Collect your photos
CLASSIC MODE
Classic mode allows players to take six quick photos, and apply a single filter to all the photos.
FILTER AND DECORATE MODE
Filter and decorate mode allows players to take two photos, apply a preset combination of effects to
them, as well as adding stickers and drawing on the photos. Once they’re done, they can select a
print layout.
MASQUERADE MODE
Masquerade mode allows players to select two masquerades and then take photos that fit into
them. Once they’re done, they can select a print layout.
MY GALLERY MODE
Players who have logged in with the Snapshot Companion App can access My Gallery mode,
allowing them to choose two photos from their account to decorate and print.
ATTRACT MODE
Snapshot 2 has an external monitor that shows a slideshow of photos taken within the Snapshot 2
photo booth, displaying the content to potential players.
PLAY MODE
Snapshot 2 has two play modes. The standard Coin Play mode, where a coin or coins are inserted, or
Free Play mode, where no coins are necessary.
COIN PLAY
Coin Play mode is entered from Attract mode, by inserting coins in any of the two coin slots on the
front of the machine cabinet, then following the instructions in the “How to Play” section.
FREE PLAY
Free play can be set in one of three ways:
•Entering the operator menu by pressing the red TEST button, then entering the game
settings. From here, enter free play settings and turn free play mode on.
•For a single free game, just press the green SERVICE button once.
•Push and hold the green SERVICE button for 5 seconds. This is a temporary free mode, and
the game will return to normal when reset.

Page | 12
OPERATION
OPERATOR MENU GUIDE
•MAIN MENU
oGAME SETTINGS
▪COIN SETTINGS
▪BONUS CREDITS
▪FREE PLAY
▪SOUND SETTINGS
▪EVENT MODE SETTINGS
▪FOOTER LOGOS
oAUDITS
oINPUT AND OUTPUT TESTS
▪LAMP TESTS
▪INPUT TESTS
▪AUDIO TESTS
oGAME HISTORY
▪PHOTO UPLOAD QUEUE
▪PHOTOS UPLOADED
▪PRINT HISTORY
oERRORS
▪CURRENT ERRORS
▪ERROR HISTORY
▪ERROR SETTINGS
oPRINTER INFORMATION
▪TEST PRINT
▪RESET PRINTER DRIVER
oSYSTEM SETTINGS
▪EXTERNAL SCREEN SIDE
▪PHOTO STORAGE
▪SCREEN CALIBRATION
▪CAMERA ALIGNMENT
▪TIME AND DATE SETTINGS
▪LANGUAGE
▪SOFTWARE UPDATES
▪SETUP PROCEDURE
oSYSTEM DIAGNOSTICS
▪COPY LOGS
▪UPLOAD LOGS
▪CHANGE BOOTH TYPE
oNETWORK SETTINGS
▪CONNECT TO NETWORK
▪TEST CONNECTION
▪INTERNET FEATURES

Page | 13
INITIAL SETUP PROCEDURE
The first time a Snapshot booth is turned on, the initial setup procedure must be performed. This
ensures that the booth is set up correctly from the first photo.
The setup procedure can be repeated at any time via the System Settings menu.
1. Calibrate your touch screen
The first step is ensuring that your touch screen is correctly calibrated. The calibration
process will begin automatically when the game is turned on for the first time. Follow the
instructions on screen, and press next to finalize the calibration. If you are unable to press
next due to a poor calibration, the calibration process will restart.
2. Select booth type (after system image only)
The first time you start up your Snapshot booth, you will not have to perform this step. It will
only appear if you have performed a system image on your booth.
Select your booth type, and press next. Your booth type can be changed at any time by going
to the System Diagnostics menu, and selecting Change Booth Type.
3. Connect to a network
Connecting your booth to the internet allows you to get free software and content updates,
and gives your users access to a host of extra free features using the Snapshot Companion
app. If there are any issues connecting to the network, these will be easier to address using
the Network Settings menu once the setup procedure is complete. You can always connect
later.
4. Select your time zone
Select the correct time zone for your location, using the up and down arrows to scroll
through the options. This will ensure that your game history menus and reports will use the
correct time. You can change the time zone or current time later by going to System Settings
and selecting the Time and Date menu.
5. Enter your email address
Entering your email address allows us to notify you when there are new software or content
updates, and what you can expect to see change in your booth in each update.
6. Setup automatic reports
Your Snapshot booth can automatically send you emails containing current audits, as well as
warnings when the print media is running low. These settings can be changed later via a link
in the report emails. If reports are turned off, you must perform the setup procedure again
to turn them on.
7. Enter your location
Entering an accurate location is important so that potential users can locate your Snapshot
booth using the Snapshot Companion app. The more information you provide, the more
accurate your location in the app will be. You can expect to see your location in the Snapshot
app 24-48 hours after your booth registration is completed. LAI Games will contact you
when your location is live in the app.
8. Finished!
If you successfully connected to a network, your registration data will now be uploaded to
the Snapshot server. If the data is unable to be uploaded immediately, it will automatically
try to upload as soon as an internet connection is established.

Page | 14
GAME SETTINGS
COIN SETTINGS
•Coin 1 Number of Coins (Default: 1, Adjustable: 1-20)
The number of coins that need to be inserted into coin mechanism one, for each credit.
•Coin 1 Games per Credits (Default: 1, Adjustable: 1-20)
The number of games for each credit inserted into coin mechanism one.
•Common Coin (Default: On, Adjustable: On/Off)
This controls the dual coin system. When set to off, both coin systems are separate (double
coin system), when set to on, both coin inputs will be combined and into a single
accumulated pool.
Example: This is often used with a DBA set on 25c pulses and 25c coin mech.
NOTE: The value of both inputs needs to be the same.
•Coin 2 Number of Coins (Default: 1, Adjustable: 1-20)
The number of coins that need to be inserted into coin mechanism two, for each credit.
•Coin 2 Games per Credits (Default: 1, Adjustable: 1-20)
The number of games for each credit inserted into coin mechanism two.
•Upsell Option (Default: On, Adjustable: On/Off)
Enable or disable the option to purchase extra prints at the end of a game.
•Payment Method Prompt (Default: Card, Adjustable: Card / Coin / Credit / Amount)
Set the type of payment prompt that will appear during attract mode. If set to Insert
Amount, the next two settings will become active.
•Currency (Default: Dollar $, Adjustable: Dollar $ / Rupiah Rp)
Set the currency that the price per play label will display in.
•Price (Default: $1.00, Adjustable: $0.10 - $10.00 / Rp 1,000 –Rp 100,000)
Set the price that will display in attract mode.

Page | 15
BONUS CREDITS
•Level One (Default: Off, Adjustable: On/Off)
Defines if the first level of bonus credits is active or not.
oNo. of Coins: This sets the number of coins that need to be inserted into coin
mechanism 1 to reach the bonus credit level 1.
oBonus Credits: This sets the number of bonus credits that are given when credit
level 1 is reached. This is the number of bonus credits given, on top of what has
been paid for.
oTotal Credits: This sets the total number of credits given when level 1 is reached.
•Level Two (Default: Off, Adjustable: On/Off)
Defines if the second level of bonus credits is active or not.
oNo. of Coins: This sets the number of coins that need to be inserted into coin
mechanism 1 to reach the bonus credit level 2.
oBonus Credits: This sets the number of bonus credits that are given when credit
level 2 is reached. This is the number of bonus credits given, on top of what has
been paid for.
oTotal Credits: This sets the total number of credits given when level 2 is reached.
•Level Three (Default: Off, Adjustable: On/Off)
Defines if the third level of bonus credits is active or not.
oNo. of Coins: This sets the number of coins that need to be inserted into coin
mechanism 1 to reach the bonus credit level 3.
oBonus Credits: This sets the number of bonus credits that are given when credit
level 3 is reached. This is the number of bonus credits given, on top of what has
been paid for.
oTotal Credits: This sets the total number of credits given when level 3 is reached.
FREE PLAY SETTINGS
•Free Play Mode (Default: Off, Adjustable: On/Off)
Defines if the machine is running in free play mode.
•Show Waiver (Default: Off, Adjustable: On/Off)
Defines if the attract mode shows a marketing waiver when in free play mode.
SOUND SETTINGS
•Game Volume (Default: 10, Adjustable: 1-10)
The volume of the audio during gameplay.

Page | 16
EVENT SETTINGS
The Event Mode Settings menu displays important information on the right hand side. It displays if
event mode is currently scheduled to begin at the event start time, as well as the event start and
end time, and the total duration of the event in hours. It also shows how many prints have been
printed during the current event time frame and in the previous event time frame.
•Event Schedule (Default: off, Adjustable: On/Off)
Schedule the event mode settings to activate at the set event start time.
•Start Time
Set the time that the event will start.
•End Time
Set the time that the event will end.
•Free Play (Default: On, Adjustable: On/Off)
Enable or disable free play during the event time frame.
•Print Photos (Default: On, Adjustable: On/Off)
Enable or disable printing photos during the event time frame.
•Limit Prints (Default: On, Adjustable: On/Off)
Limit the number of prints during the event time frame. Setting a print limit will cause the
event to finish once the limit is reached, even if the event end time has not been reached.
•Max Print Count (Default: 500, Adjustable: 1-2000)
The maximum amount of prints allowed during the event time frame. Note that extra photo
copies count towards the max print count.
•Extra Print Copies (Default: 0, Adjustable: 0-3)
The number of extra photo copies printed at the end of the game. Settings this to 1 extra
print will give each player a total of 2 prints at the end of the game.
•Internet Features (Default: Off, Adjustable: Off/On)
Enable or disable extra features dependent on an internet connection, such as Snapshot app
log in functionality and marketing content. An internet connection is needed for this feature.
•Lock Game Outside Event (Default: On, Adjustable: On/Off)
If enabled, the game will lock in attract mode outside of the event time frame. The game is
not playable when locked in attract mode.

Page | 17
FOOTER LOGOS
Manage the footer logos that appear at the bottom of each print. View, delete and activate existing
footer logos, or import new footer logos.
•Save Photos (Default: On, Adjustable: On/Off)
Enable or disable printing the footer logo along the bottom of all photos.
•IMPORT
Import new footer logo files from a USB. Files must be 1386 x 150 pixel sized PNG files
located in the root directory of a USB (not within any folders). File name must be
“watermark”.
VIEW FOOTER LOGOS
View all footer logos currently stored and choose a footer logo to set as active. Use the UP and
DOWN buttons to scroll through logos, and press the red TEST button to set the selected footer logo
as active.
DELETE FOOTER LOGOS
View and delete any footer logos currently stored. Use the UP and DOWN buttons to scroll through
logos, and press the red TEST button to delete the selected footer logo
•Active Footer Logo
A shortcut to view and change the active footer logo. Press the red TEST button to select the
setting, the use the UP and DOWN buttons to scroll through available logos. Press the rest
TEST button again to set the currently visible footer logo as active.
MANAGE CONTENT
These menus can be used to manage any personalized content, seasonal content or custom modes
that your Snapshot unit has.
ACTIVATE CONTENT
If no extra content is activated, all content displayed in Snapshot will be from the default content
that comes with the game. Any personalized content that is activated via this menu will be displayed
first, replacing some default content. Custom Modes need to be activated before they can be used in
the Manage Modes menu.
The information on the right will show the name of the personalized content pack, the type of
content it is (personalized content or custom mode), and how many pieces of content it contains.
MANAGE MODES
A maximum of three modes and a minimum of one mode can be activated at any time. The image on
the right hand side of the screen acts as a preview of the mode select screen. The log in tile cannot
be switched off. Note that a custom mode must be activated via the Activate Content menu before it
can be used in the Manage Modes menu.
DELETE CONTENT
A maximum of five content packs can be stored at any time. The Delete Content menu can be used
to delete content packs to make space for new ones.
IMPORT CONTENT
Once your content pack is located in the root directory of a USB device, plug it into your Snapshot
booth, and the Import Content procedure will guide you through the import process step by step.

Page | 18
AUDITS
1. Total Coins Mech 1
The total number of coin mech 1 pulses since the audits were last cleared
2. Total Coins Mech 2
The total number of coin mech 2 pulses since the audits were last cleared
3. Bonus Credits
The total number of bonus credits issued
4. Service Credits
The total number of service credits issued since the audits were last cleared
5. Credits Used
The total number of credits used
6. Games Played
The total number of games played
7. Classic Mode Percentage
The percentage of players that chose to play Classic Mode
8. Filter Mode Percentage
The percentage of players that chose to play Filter and Decorate mode
9. Masquerade Mode Percentage
The percentage of players that chose to play Masquerade Mode
10. Average Game Time
The average amount of time, in seconds, one game lasts for
11. Total Prints
The total number of prints
12. Average Number of Prints Per Game
The average number of photos printer per game
13. One Extra Print Percentage
The percentage of players that purchased one extra print
14. Two Extra Prints Percentage
The percentage of players that purchased two extra prints
15. Three Extra Prints Percentage
The percentage of players that purchased three extra prints
16. Total Number of Extra Prints
The total number of extra prints that have been purchased
17. Total Number of Extra Prints Percentage
The total percentage of players that have purchased at least one extra print
18. Print Failures
The total number of failed prints
19. Logged In Percentage
The percentage of game plays that have a user logged in
20. Percentage of Photos Uploaded
The percentage of players that choose to upload their photos to the Snapshot server at the
end of the game. Uploading photos requires an internet connection.

Page | 19
INPUT AND OUTPUT TESTS
LAMP TESTS
•PHOTO SLOT LIGHT
Test the photo slot light, located at the top of the print chute.
•TOP CAMERA LIGHT
Test the arrow lamp that points to the top camera, located directly beneath the top camera.
•COUNTDOWN LIGHT 1
Test the first countdown light, number one, located above the bottom camera.
•COUNTDOWN LIGHT 2
Test the second countdown light, number two, located in the center of the two cameras.
•COUNTDOWN LIGHT 3
Test the third countdown light, number three, located below the top camera.
•BOTTOM CAMERA LIGHT
Test the arrow lamp that points to the bottom camera, located directly above the bottom
camera.
•BOOTH LIGHTING 1
Test the interior booth lighting by scaling up the brightness from one to ten.
•BOOTH LIGHTING 2
Test the interior booth lighting by scaling up the brightness from one to ten.
•BOOTH LIGHTING 3
Test the interior booth lighting by scaling up the brightness from one to ten.
•RED / GREEN / BLUE RGB
Test the RGB lighting by scaling up the brightness from one to ten.
INPUT TESTS
Test all the inputs on the cabinet. A cross in the checkbox indicates that the input is receiving a
signal.
AUDIO TESTS
•TEST INTERNAL SPEAKERS
Play a voice over through the internal speakers.
•TEST INTERNAL SPEAKERS
Play a voice over through the external speakers.
GAME HISTORY
PHOTO UPLOAD QUEUE
This menu lists information about player photos that are queued to be uploaded. Hold down the
utility button for 3 seconds with an entry selected to delete that photo upload.
EMAIL
The email address that the player entered in the booth. This email address must be valid for the user
to receive their photos.
GAME TIME
The time the player started the game.
UPLOADED
How many photos have been uploaded.

Page | 20
ACTION
Select an upload and press the red SELECT button to use the action button of the selected upload.
The Send Next action will move the selected upload to the next one in the queue.
STATUS
The status of the upload. Once a photo is successfully uploaded, it will appear in the Photos
Uploaded menu.
CANCEL UPLOADS
This button will DELETE ALL pending photo uploads. Players will not receive their photos if they have
been deleted from the upload queue. To remove a single upload from the queue, select it and hold
down the utility button for 3 seconds.
UPLOADED PHOTOS
EMAIL
The email address that the player entered in the booth. This email address must be valid for the user
to receive their photos.
GAME TIME
The time the photo was uploaded.
ATTEMPTS
The number of times the game tried to upload the photo and failed, before successfully uploading
the photo. If the send attempts of photo uploads are consistently high, consider checking the
stability of your internet connection. If using a wifi connection, a wired LAN connection might offer
more stability.
TIME SENT
The time the photo was uploaded.
PRINT HISTORY
The print history menu can be used to view photos from previous games, as well as reprint them.
Note that photos can only be reprinted in the same print layout that the player originally chose.
GAME ID
A unique game ID assigned to each Snapshot game. One game ID can have more than one print
history item assigned to it.
GAME MODE
The game mode that the player selected at the beginning of the game. Note that if you have Internet
Features turned on, players can access My Gallery mode, which is still counted as a Filter Mode
game.
GAME TIME
The time that the player began their game.
PRINTED
Shows the result of the print. A failed print is represented by a cross, and a successful print is
represented by a tick.
ACTION
Highlighting a print history item and pressing the red SELECT button will perform the action for that
item. Reprint will reprint the photos, as displayed on the right hand side of the screen.