LAI Games SLAM N JAM User manual

1
OPERATOR MANUAL
Version 6
SLAM ‘N’ JAM
PLEASE NOTE
Read this manual before operating the machine.
Visit www.laigames.com for support.

2
Correspondence regarding this machine should be addressed to
your closest LAI Games office, or LAI Games Distributor.
For contact details, refer to the back page of this manual.
© LAI Games
Copyright Notice:
Authorization is hereby provided to you to copy this manual in its
entirety provided such copies are used for non-commercial
purposes and solely for use with LAI Games products. This
authorization is specifically conditioned to include all legends,
copyright, proprietary and other notices which appear herein are
unaltered on any and all copies you make.

3
Table of Contents
SAFETY PRECAUTIONS.............................................................................................................................5
MACHINE INSTALLATION AND INSPECTION ...........................................................................................6
INTRODUCTION.......................................................................................................................................7
DESCRIPTION.......................................................................................................................................7
PACKAGING.............................................................................................................................................7
CONTENTS...........................................................................................................................................7
SPECIFICATIONS ..................................................................................................................................7
ELECTRIC SUPPLY.............................................................................................................................7
LOCATION REQUIREMENTS.............................................................................................................8
BILL VALIDATOR REQUIREMENTS ...................................................................................................8
DIMENSIONS ...................................................................................................................................8
CONTENTS DETAILED ......................................................................................................................9
UNPACKAGING..............................................................................................................................10
ASSEMBLY .....................................................................................................................................14
POWER AND DATA CONNECTIONS...............................................................................................21
GAMEPLAY AND MODES...................................................................................................................25
OBJECTIVE .....................................................................................................................................25
HOW TO PLAY ...............................................................................................................................25
OPERATION ...........................................................................................................................................25
CHECK ACCOUNT...............................................................................................................................25
BASIC SETTINGS.................................................................................................................................26
GAME PARAMETERS .........................................................................................................................27
SUGGESTED SETTINGS ......................................................................................................................28
HARDWARE TEST...............................................................................................................................28
OUTPUT TEST ................................................................................................................................28
INPUT TEST....................................................................................................................................28
MONITOR TEST..............................................................................................................................29
LINKING CABINETS ................................................................................................................................29
ERRORS AND TROUBLESHOOTING........................................................................................................30
COMMON SERVICE AREAS....................................................................................................................33
CABINET FRONT ................................................................................................................................33
CONTROL PANEL –SERVICE CONTROLS........................................................................................33

4
COIN/TICKET METERS ...................................................................................................................33
TECHNICAL SERVICE AREAS...................................................................................................................34
ELECTRICAL BOX................................................................................................................................34
ANDROID PCB................................................................................................................................35
I/O BOARD.....................................................................................................................................35
LED DRIVE PCB ..............................................................................................................................35
MAINS SWITCH/FUSE PCB.............................................................................................................36
POWER SUPPLY.............................................................................................................................36
PREVENTATIVE MAINTENANCE ............................................................................................................37
EXTERIOR.......................................................................................................................................37
LIGHTING.......................................................................................................................................37
INTERIOR.......................................................................................................................................37
WIRING DIAGRAMS...............................................................................................................................37
MECHANICAL ILLUSTRATIONS ..............................................................................................................45
PLAYFIELD ASSEMBLY........................................................................................................................45
PLAYER CONSOLE ASSEMBLY 1............................................................ Error! Bookmark not defined.
PLAYER CONSOLE ASSEMBLY 2.........................................................................................................46
BALL GATE ASSEMBLY.......................................................................................................................47
BALL SHIELD ASSEMBLY ....................................................................................................................47
BACKBOARD ASSEMBLY....................................................................................................................52

5
SAFETY PRECAUTIONS
The following safety precautions and advisories used throughout this manual are defined as follows.
PLEASE READ THE FOLLOWING
WARNING: Disregarding this text could result in serious injury.
CAUTION: Disregarding this text could result in damage to the machine.
NOTE: An advisory text to hint or help understand.
WARNING: Always turn OFF Mains AC power and unplug the game before opening or
replacing any parts.
Always grasp the plug, not the line cord, when unplugging the game from
an electrical outlet.
Always connect the Game Cabinet to a grounded electrical outlet with a
securely connected ground line.
Do Not install the Game Cabinet outdoors or in areas of high humidity,
direct water contact, dust, high heat or extreme cold.
Do Not install the Game Cabinet in areas that would present an obstacle in
case of an emergency, i.e. near fire equipment or emergency exits.
CAUTION: Always use a Digital Multimeter, logic tester or oscilloscope for testing
integrated circuit (IC) logic PC boards. The use of a continuity tester is not
permitted.
Do Not connect or disconnect any of the integrated circuit (IC) logic PC
boards while the power is ON.
Do Not use any fuse that does not meet the specified rating.
Do Not subject the game cabinet to extreme temperature variations.
Reliability of electrical components deteriorates rapidly over 60 oC.

6
MACHINE INSTALLATION AND INSPECTION
When installing and inspecting game name, be very careful of the following points and pay attention
to ensure that the players can enjoy the game safely.
•Be sure to turn the power OFF before working on the machine.
•Make sure the power cord is not exposed on the surface (floor, ground, etc.) where people walk.
•Check that the rubber glide feet levellers are set correctly on the floor so that the game cabinet
is level and stable.
•Always make complete connections for the integrated circuit (IC) logic PC Boards and other
connectors. Insufficient insertion can damage the electrical components.
•Only qualified personnel should inspect or test the integrated circuit (IC) logic PC Boards.
•If any integrated circuit (IC) logic PC Boards should need servicing, please contact the nearest LAI
Games Distributor (refer to the back page of this manual).
CAUTION: Before switching the machine on be sure to check that it has been set on the
correct voltage for your area!
Refer to the mains voltage adjustment section of this manual. Machines are
normally shipped on 220V AC unless otherwise specified.
WARNING: Always turn OFF mains power before removing safety covers and refit all safety
covers when work is completed.

7
INTRODUCTION
Congratulations on your purchase of Slam ‘n’ Jam by LAI Games. We hope you take the time to
read this manual and learn about the many features and user-friendly adjustments that can be made
to fine-tune the game for maximum earning potential.
DESCRIPTION
PACKAGING
CONTENTS
•Manual
•Power cord
•2x Coin door keys
•Coin box key
•Allen keys (3, 4, 5mm)
•Spare ball gate sensor
•2x Fuse 4A
•Mains Fuse 10A
•5x basketballs
SPECIFICATIONS
ELECTRIC SUPPLY
•Amps at 110VAC: 3A
•Amps at 220VAC 1.4A
•Watts: 310W
•Voltage: 110V/220V
•Mains fuse Size: M205
•Mains fuse 110VAC: 10A
•Mains fuse 220VAC: 6A

8
LOCATION REQUIREMENTS
•Ambient temperature: 5C - 40C
•Ambient humidity: Low
•Ambient U.V. radiation: Very low
•Vibrations level: Low
BILL VALIDATOR REQUIREMENTS
•Volts: 12VDC
•Magazine Size: Up to 1000 bill capacity
DIMENSIONS
•Weight: 400kg (882 lb.) (with packaging)
•Weight: 370kg (816 lb.) (without packaging)
•Height: 2410mm (94.9”) (excluding header)
•Height: 2622mm (103.3“) (including header)
•Width: 943mm (37.1“)
•Length: 2623mm (103.3“)

9
CONTENTS DETAILED

10
UNPACKAGING
1. After removing the box and packaging, remove the screws that affix the basketball backboard.
Remove 8 screws first, and reserve one screw at the top of the left and right sides to prevent the
backboard from falling. Use two people to remove the remaining two screws and remove the
backboard. Then remove the fixed backboard bracket from the playfield.
WARNING: The use of three persons is required to unpack the machine. Take caution when
removing heavy parts, and when removing the unit from the pallet.

11
2. Remove the items inside the cover (such as basketballs, hoop, support box, etc.). Remove the top
screws and then remove the connecting fixed bracket at the bottom of the cover.
3. Remove the screw at the top of each fence, then remove the 3 fixing screws at the bottom. The
fences can now be taken out and set aside. The fixed brackets need to be removed after the body
is down (after step 1 of the assembly procedures).

12
4. First remove the screws of the top bracket while a second person holds the fence. Once the top
bracket is removed, lift and remove the fence and set aside. Then remove the bottom fixed
bracket.
5. Remove 4x M6 screws from both sides of the fuselage, remove the ball shield, then remove the
screws of the fixing bracket and remove the bracket.

13
6. Using two people, remove the 6x M6 screws from both sides of the electrical box, then remove
the electrical box and set aside.
7. Remove the 4x Phillips screws fixed on the side of the console, take out the console together with
the fixed brackets, and then remove the brackets from the console.

14
ASSEMBLY
1. Lay down the playfield in its correct position and lock all 4 wheels. The backboard is erected on
the rear of the playfield, supported by two persons. One person installs 5x M4*45 hex screws
with washers and lock washers while the other holds the backboard in place. Once installed,
remove the rear monitor cover and cable cover for later steps.
NOTE: Due to excessive vibration on basketball games, we advise the use of the provided
liquid thread-locker when installing hardware.
WARNING: The use of two persons is required to assemble the machine. Take caution when
lifting and installing heavy items.
CAUTION: Lock all four wheels once the cabinet is down in its final position to avoid
movement during installation.

15
2. Secure the hoop with 5x M5*20 screws. Washers and lock washers are required.
3. Place the lower right fence on the right side of the playfield, install 7x M6*45 screws with spring
washers and washers. Once the fence is installed, install the ball guide bracket with 3x M4*12
screws.

16
4. Set the upper-right fence on top of the lower-right fence, install 3x M6*45 screws from the top of
the lower fence to secure. Pass any LED wiring from the top and bottom of the upper fence
through the backboard openings. Use 5x M6*45 screws from the back to connect the backboard
to the upper fence.

17
5. Place the lower-left fence on the left side of the playfield. Secure with M6*45 screws, spring
washers and washers. Once the fence is installed, install the ball guide bracket with 3x M4*12
screws.

18
6. Place the upper-left fence on top of the lower-left fence, install 3 M6*45 screws from the top of
the lower fence secure. Once installed, use 5x M6*45 screws to secure the fence to the
backboard.

19
7. Place the top cover on top of the upper fences. Connect the top cover to the fence with the
connection brackets. Secure with 12x M6*12 screws.
8. The ball shield will be assembled between the two upper fences. The LED connection is on the
right side of the machine. Connect the LED cable and secure the ball shield with screws, washers,
and lock washers.

20
9. Slide the player console into the front opening of the machine. Open the front maintenance door
and secure the console with 4x M6*12 screws.
10. Install the electrical box behind the player console, under the playfield. Secure with 6x M6*12
screws.