LAI Games Slam'N'Jam Junior User manual

►READ THIS MANUAL BEFORE OPERATING THE MACHINE.
►KEEP THIS MANUAL FOR YOUR REFERENCE.
© LAI GAMES
www.laigames.com

Correspondence regarding this machine should be addressed to
your closest LAI GAMES office, or LAI GAMES Distributor.
For contact details, refer to the back page of this manual.
The LAI GAMES Office is located at
11 Chang Charn Road #04-03 Shriro House
SINGAPORE 1
59640
LAI GAME
S
© LAI GAMES
Copyright Notice:
Authorization is hereby provided to you to copy this
manual in its entirety provided such copies are used for
non-commercial purposes and solely for use with LAI
GAMES products. This authorization is specifically
conditioned to include all legends, copyright, proprietary
and other notices which appear herein are unaltered on
any and all copies you make.

i
LAI GAMES
NOTES
Dear Customer,
Keep up-to-date with any new Software release or Service Bulletins for
this Game.
Check our Website at www.laigames.com and click on Product Support,
here you will find links to all the Bulletins and Software Updates to keep
your game in top working order.
You can also subscribe to our Service Bulletin mail listing at
[email protected]
Thanks,

Operator's Manual – Slam'N'Jam Junior
© LAI GAMES
i
TABLE OF CONTENTS
SAFETY PRECAUTIONS..........................................................................................1
MACHINE INSTALLATION AND INSPECTION...................................................2
INTRODUCTION........................................................................................................3
SPECIFICATIONS....................................................................................................4
HOW TO PLAY.........................................................................................................5
OPERATION ...............................................................................................................6
OPERATIONAL DIAGRAM ..................................................................................6
ATTRACT MODE ..................................................................................................6
PLAY MODE..........................................................................................................6
TEST MODE .............................................................................................................7
TEST MODE DIAGRAM .......................................................................................7
SOUND, LAMPS & DISPLAY TEST .....................................................................8
SWITCH TEST.......................................................................................................8
RUN TEST............................................................................................................10
PROGRAMMABLE ADJUSTMENTS MODE......................................................11
PROGRAMMABLE ADJUSTMENTS MODE DIAGRAM...................................11
PROGRAMMABLE ADJUSTMENTS PROCEDURE .........................................11
PROGRAMMABLE ADJUSTMENTS QUICK REFERENCE TABLE................12
PROGRAMMABLE ADJUSTMENTS DETAILED..............................................12
AUDITS MODE ......................................................................................................14
AUDITS MODE DIAGRAM ................................................................................14
AUDIT PROCEDURE.........................................................................................15
AUDITS QUICK REFERENCE TABLE..............................................................16
AUDITS DETAILED............................................................................................16
ERRORS AND TROUBLESHOOTING.................................................................17
ERROR CODE QUICK REFERENCE TABLE ...................................................17
TROUBLESHOOTING GAME ERRORS ............................................................18
FUSE INFORMATION...........................................................................................19
FUSE LOCATION DIAGRAM.............................................................................19
SECTION A: SERVICE INSTRUCTIONS ...........................................................20
LOCATING AND ACCESSING PARTS ...............................................................21
PARTS LOCATION DIAGRAM...........................................................................21
PARTS DESCRIPTION........................................................................................22
LAMPS ....................................................................................................................24
MAINTENANCE ....................................................................................................25

Operator's Manual – Slam'N'Jam Junior
© LAI GAMES
ii
SECTION B: TECHNICAL DETAILS...................................................................26
MAINS VOLTAGE ADJUSTMENT......................................................................27
TICKET DISPENSER REFERENCE GUIDE ........................................................28
BASIC OPERATION............................................................................................28
SPECIFICATIONS...............................................................................................30
TD-963CR SCHEMATIC DIAGRAM..................................................................31
DISPENSER PARTS DIAGRAM..........................................................................32
3D EXPLODE PARTS............................................................................................33
SLAM'N'JAM JUNIOR MAIN WIRING DIAGRAM ...........................................35

Operator's Manual – Slam'N'Jam Junior
© LAI GAMES
Page 1
SAFETY PRECAUTIONS
The following safety precautions and advisories are used throughout this manual and
are defined as follows.
BE SURE TO READ THE FOLLOWING
* WARNING! *
Disregarding this text could result in serious injury.
* CAUTION! *
Disregarding this text could result in damage to the machine.
* WARNING! *
Always turn OFF Mains AC power and unplugged the game, before
opening or replacing any parts.
Always when unplugging the game from an electrical outlet, grasp the
plug, not the line cord.
Always connect the Game Cabinet to grounded electrical outlet with a
securely connected ground line.
Do Not install the Game Cabinet outdoors or in areas of high humidity,
direct water contact, dust, high heat or extreme cold.
Do Not install the Game Cabinet in areas that would present an
obstacle in case of an emergency, ie. near fire equipment or emergency
exits.
* NOTE! *
An advisory text to hint or help understanding.
* CAUTION! *
Always use a Digital Multimeter, logic tester or oscilloscope for testing
integrated circuit (IC) logic PC boards. The use of a continuity tester is
not permitted.
Do Not Connect or disconnect any of the integrated circuit (IC) logic PC
boards while the power is ON.
Do Not use any fuse that does not meet the specified rating.
Do Not Subject the game cabinet to extreme temperature variations.
Reliability of electrical components deteriorates rapidly over 60 oC.

Operator's Manual – Slam'N'Jam Junior
© LAI GAMES
Page 2
MACHINE INSTALLATION and INSPECTION
When installing and inspecting “Slam'N'Jam Junior”, be very careful of the following
points and pay attention to ensure that the players can enjoy the game safely.
Be sure to turn the power OFF before working on the machine.
Make sure the power cord is not exposed on the surface (floor, ground, etc.) where
people walk through.
Check that the rubber glide feet levelers are set evenly on the floor so that the game
cabinet is unable to roll and is stable.
Always make complete connections for the integrated circuit (IC) logic PC Boards
and other connectors. Insufficient insertion can damage the electrical components.
Only qualified personnel should inspect or test the integrated circuit (IC) logic PC
Boards.
If any integrated circuit (IC) logic PC Boards should need servicing. Please contact
the nearest LAI GAMES distributor. (Refer to the back page of this manual)
* CAUTION! *
Before switching the machine on be sure to check that it has been set on the
correct voltage for your area!
Refer to the mains voltage adjustment section of this manual on page 27.
Machines are normally shipped on 220V AC unless otherwise specified.
* WARNING! *
Always Turn OFF mains power before removing safety covers and refit all safety
covers when work is completed.
* NOTE! *
Slam and Jam Jnr is normally shipped as a kit, and is not fully assembled.
For assembly instructions please refer to the assembly manual

Operator's Manual – Slam'N'Jam Junior
© LAI GAMES
Page 3
INTRODUCTION
CONGRATULATIONS! You have just bought the “Slam'N'Jam Junior”, another
sensational product from LAI games. This game is based around out popular “Slam and
Jam” basket ball game and redesign to be a children friendly basketball game. With
bright, friendly graphics, easier hoop position and a maximum tickets feature to reduce
cheating, we are confident it will make a great addition to any center.
We hope you take the time to read this manual and learn about the many other features
and user-friendly adjustments that can be made to “fine-tune” the game for maximum
earning potential.
DESCRIPTION
The “Slam'N'Jam Junior” ” is a one player, ticket redemption basketball game,
requiring the player to shoot basketballs through a hoop and try to score as high as
possible.
PACKAGING
At delivery, the machine should arrive in good condition. To move the packaged
machine for transport or placement, use a forklift and take care not to hit the package
or stack heavy objects on top, as this may cause damage to the machine.
CONTENTS
The “Slam'N'Jam Junior” cabinet front section
The “Slam'N'Jam Junior” cabinet rear & frame sections
Keys: 2 x coin door keys
2 x service door keys
2 x ticket door key
Operator’s manual
Assembly manual
4 size 3 basketballs
IEC Power Cord
Assembly Bolts & Parts
(for full information on assembly bolts and Parts, refer to the assembly manual)
* NOTE! *
Slam and Jam Jnr is normally shipped as a kit, and is not fully assembled.
For assembly instructions please refer to the Assembly Manual

Operator's Manual – Slam'N'Jam Junior
© LAI GAMES
Page 4
SPECIFICATIONS
DIMENSIONS
Weight: 173 kg (384lb)
Height: 2035 mm (80.1")
Width: 900 mm (35.4")
Length: 1790 mm (70.5")
Power: Maximum 180 w – (220V @ 0.75A)(120V @ 1.5A)
Average 100 w – (220V @ 0.45A)(120V @ 0.83A)
ELECTRIC SUPPLY
The game has the option to operate on a 110V, 120V, 220V or 240V AC 50/60Hz
single phase mains electric supply.
The supply must be a three wire grounded supply.
LOCATION REQUIREMENTS
Ambient temperature: between 5oC and 40oC.
Ambient humidity: Low
Ambient U.V. radiation: Very low
Vibrations level: Low
* CAUTION! *
Before switching the machine on be sure to check that it has been set on the
correct voltage for your area!
Please Refer to the mains voltage adjustment section of this manual on page 27.
Machines are normally shipped on 220V AC unless otherwise specified.

Operator's Manual – Slam'N'Jam Junior
© LAI GAMES
Page 5
HOW TO PLAY
THE PLAYER’S AIM IS TO SHOOT THE BALLS
THROUGH THE HOOP AS MANY TIMES AS POSSIBLE
DURING THE TIME LIMIT
Insert coin/s.
Press the Start button to start the game. The ball gate will open releasing the basket
balls.
The player then throws the balls, trying to get them to go through the hoop. For
each ball through the hoop the player gets 2 points, except during the last 10
seconds of game play, when the player gets 3 points per ‘basket’.
After the end of the game, tickets are paid out according to the player’s score and
the program settings
(See page 11 for more details on programmable adjustments).

Operator's Manual – Slam'N'Jam Junior
© LAI GAMES
Page 6
OPERATION
The “Slam'N'Jam Junior” game has five operational modes: Attract mode, Play mode,
Test mode, Programmable Adjustments Mode and Audits Mode.
OPERATIONAL DIAGRAM
ATTRACT MODE
The Attract mode provides a light and sound display, while the game is not being
played. This feature is to attract potential customers to play the game. The attract
mode sound can be turned on and off
(Refer to programmable adjustment P09, see page 11 of this manual).
PLAY MODE
The Slam'N'Jam Junior has two play modes. The Standard Coin Play mode, where
a coin, or coins are inserted. Or Free Play where no coins are necessary.
COIN PLAY
The Coin Play mode is entered from Attract mode, by inserting coins in any of the
two coin slots on the front of the machine cabinet, then following the instructions
in the “How to Play” section of this manual.
FREE PLAY
The free play mode is entered from attract mode by holding the Service button for
longer than five second,
F r E will be displayed on the 3-digit LED display.
To get back to normal game Play mode Switch Off and On the Machine.
POWER UP
ATTRACT MODE PLAY MODE
TEST MODE
PRESS TEST
AUDITS MODE
PRESS TEST
PROGRAMMABLE ADJUSTMENTS MODE
PRESS TEST
PRESS TEST
* NOTE! *
Entering test mode will
clear any stored credits

Operator's Manual – Slam'N'Jam Junior
© LAI GAMES
Page 7
PROGRAMMABLE ADJUSTMENTS MODE
PLAY MODE
The Display counts,
all Lamps are flashing
and Sound is played
ATTRACT MODE
1 1 1
9 9 9
C 0 0
C 0 1 C 0 2 C 0 6 C 0 8
0 0 0
r
1
r
r
r
BALL GATE RUN TEST
Press Service button to activate
LED displays run test function
Er# indicates Ball Gate problem
r
3
E
r
6
r
0
r
2
E
r
6
TEST MODE
The Slam'N'Jam Junior Test mode has Three Test Configurations allowing you to
explore the functioning of the Sound, Light & Display, the Game Switches and to
allow an operational test of the Ball Gate. (Refer to the Test Mode Diagram below).
The Test mode is also used for Clearing Game Errors. If there is an active error, its
code will be displayed. To try to clear the error code, press the red test button once.
The error can be bypass by quickly pressing the red test button twice.
(For Game Errors codes, refer to page 17).
TEST MODE DIAGRAM
* NOTE! *
Entering Test Mode will CLEAR any CREDITS remaining in the game.
If during test mode no ADJUSTMENTS or actions are made to the game for
approximately four minutes, it will automatically RETURN to Attract Mode.
S
OUND, LAMPS & DISPLAY TEST
No INPUT is active
Tilt sensor
is active
TICKET notch
is active SERVICE switch
is active Consolation Prize
is active
To
PRESS TEST
PRESS TEST
S
WITCH INPUT TEST
PRESS TEST
PRESS TEST
R
UN TEST PRESS
SERVICE
Loops back
PRESS
SERVICE
Ball Gate O
p
enin
g
Ball Gate O
p
en
Gate O
p
enin
g
Error
Ball Gate Closin
g
Ball Gate Closed
Gate Closin
g
Error

Operator's Manual – Slam'N'Jam Junior
© LAI GAMES
Page 8
SOUND, LAMPS & DISPLAY TEST
ENTER The Sound, Lamp & Display test is entered from Attract mode by
pressing the test button once.
DURING THE TEST:
oGame music and a voice over will be played.
oThe 3-digit display will count from 000 to 999 and then repeat.
oThe light rope will run a test pattern sequence.
oThe Start button lamp will flash on and off
EXIT The Sound, Lamp & Display test is exited by pressing the test button.
The next test will be switch test.
SWITCH TEST
ENTER The Switch Test can be entered by pressing the Test button once while
in the Sound, Light & display test or by pressing the Test button twice
while in Attract mode, C
X
X
will be displayed on the 3-digit display
where ‘XX’ is a number representing the switch that is active.
TESTING THE GAME SWITCHES
All game switches have a code from C1 to C8 as tabled below. By
activating any of the switches, their code will be displayed on the 3-
digit display. If no switches are active then C 0 0 will be displayed.
CODE DISPLAY SWITCH FUNCTION SWITCH LOCATION
C0
C 0 0 No Switch Active -
C1
C 0 1 Service Switch Active Service Panel
C2
C 0 2 Coin Switch Active Coin Door
C3
C 0 3 Ticket Notch Ticket Door
C4
C 0 4 Start Button Active Control Panel
C5
C 0 5 Not Used -
C6
C 0 6 Ball Gate Switch Active Ball Gate Mechanism
C7
C 0 7 Not Used -
C8
C 0 8 Ball Sensor Active Cabinet Back
Normal condition for the game is C 0 3 & C 0 6 , Ticket Notch and Ball Gate
switches are active.
* NOTE! *
If there is an active error displayed, press the red test button once to try and
clear the error.
If the error code will not clear, it can be bypass by quickly pressing the red
test button twice.
* NOTE! *
Several switches can be simultaneously activated in Switch test. The display
will then consecutively show their codes, indicating which switches are
active. However, it is much easier to test the game switches individually..

Operator's Manual – Slam'N'Jam Junior
© LAI GAMES
Page 9
TICKET DISPENSER NOTCH
The Ticket Notch Switch (C1) can be activated or deactivated from the
Ticket Feed Button on the Ticket Dispenser PCB or by manually
pushing the tickets from the ticket holder through the dispenser after
pulling the ticket release rod upwards
EXIT The Switch Test is exited into Run Test Mode by pressing the Test
Button once.
Ticket Tensioning
mechanism
Ticket release rod
* NOTE! *
For more information on the servicing and testing the
ticket dispenser please look at the Dispenser Reference guide.

Operator's Manual – Slam'N'Jam Junior
© LAI GAMES
Page 10
RUN TEST
ENTER The Run Test can be entered by pressing the Test button once while in
the Switch Test or by pressing the Test button three times while in
Attract mode, rrrwill be displayed on the 3-digit display.
SELECT Operation of the Ball Gate Motor and Switch can be tested. To start the
test, press the Service button. The Service button is then pressed again
to alternately open and close the gate.
Refer to the following table for the status of the Ball Gate Run Test:
CODE DISPLAY SWITCH FUNCTION
R-0 r 0Ball Gate is Closing
R-1 r 1Ball Gate is Opening
R-2 r 2Ball Gate is Closed
R-3 r 3Ball Gate is Open
Er5
E r5Ball Gate Error
EXIT The Run Test is exited into Programmable Adjustments Mode by
pressing the Test Button once.

Operator's Manual – Slam'N'Jam Junior
© LAI GAMES
Page 11
PRESS START
to change value
1, 2, 3, 4 … 10
P 0 4
P PP 1 1
P
11 4
PROGRAMMABLE ADJUSTMENTS MODE
The Slam'N'Jam Junior has seven programmable adjustments that can be changed in
this mode. They are P04 to P11 and their codes and values are displayed alternatively
during the adjustment procedure.
Example: Code P01 (Number of Coins Mech 1) is displayed as P 0 4 and its value
of 1as 1 on the 3-digit display.
PROGRAMMABLE ADJUSTMENTS MODE DIAGRAM
PROGRAMMABLE ADJUSTMENTS PROCEDURE
ENTER The Programmable Adjustments Mode can be entered by pressing the
Test button once while in the Run Test or by pressing the Test button
four times while in Attract mode, PPPwill be displayed on the 3-
digit credit display.
SELECT The green Service button is pressed to step through each of the
adjustment configurations, starting from the PPPdisplay, P04 being
the first step, continuing through to P11, and then looping again from
P04 to P11 until the mode is exited.
CHANGE The Start button is pressed to change the displayed value. The value
can only be stepped up by using the Start button, but the value will
loop back to its minimum value the next step after its max value.
EXIT The Programmable Adjustments mode is exited into Audits mode, by
pressing the Test button once.
RUN TEST MODE
PRESS TEST
P
ROGRAMMABLE ADJUSTMENTS MODE
PRESS
SERVICE PRESS
SERVICE
REPEATEDLY
To step from
P04 to P11
AUDIT MODE
PRESS TEST
* NOTE! *
Certain program adjustments have a fast adjustment feature. By holding the
Start/Stop button down, the values step through quicker.
Loops back to P04

Operator's Manual – Slam'N'Jam Junior
© LAI GAMES
Page 12
PROGRAMMABLE ADJUSTMENTS QUICK
REFERENCE TABLE
CODE PROGRAMMABLE
ADJUSTMENTS OPTIONAL VALUES DEFAULT SETTINGS FEATURES
P04 1 – 10 1, 2, 3…10 01 Game Pricing No. Coins
P05 1 – 10 1, 2, 3…10 01 Game Pricing No. Credits
P06 1 – 100 1, 2, 3…100 03 Ticket Payout Points / Ticket
P07 45 – 90secs
in 5 sec steps 45, 50…90 45 Game Time Adjustment
P09 ON [ 1 ] or
OFF [ 0 ] 1 (on), 0 (off) ON Attract Sound ON / OFF
P10 0 – 10 0, 1, 2…10 2 Minimum Tickets
P16 0 – 10 0, 1, 2…100 14 Maximum Tickets
P17 OFF-ON OFF, ON ON Ticket Option
P18 0 – 5 0,1,2…5 0 Ball Gate time out in second
PROGRAMMABLE ADJUSTMENTS DETAILED
P04 = NUMBER OF COINS PER CREDIT
(Default 01) (Adjustable 1 – 10)
This variable sets the number of coins that need to be inserted into coin
mechanism 1, for each credit. It can be set to either of 1, 2, 3… to 10 coins for one
credit.
P05 = NUMBER of PLAYS PER CREDIT
(Default 01) (Adjustable 1 – 10)
This sets the number of games for each credit inserted into coin mechanism 1. It
can be set to either of 1, 2, 3… to 10 plays for each credit.
P06 = NUMBER OF POINTS PER TICKETS
(Default 06) (Adjustable 1 – 100)
This is the number of points the player needs to score to win each ticket.
P07 = GAME TIME
(Default 45) (Adjustable 45 – 90 seconds, in 5 - second steps)
This sets the length of time that each game plays for in seconds. The time does not
include the starting intro and end of game feature. It is only “Game Play” time.
* NOTE! *
The last 10 seconds of game play is “3 Point Score”
(3 points for each score instead of 2 points).
This is regardless of the game time setting

Operator's Manual – Slam'N'Jam Junior
© LAI GAMES
Page 13
P09 = ATTRACT MODE SOUND
(Default ON) (Adjustable ON or OFF)
This adjustment turns the attract mode sound ON or OFF. This is the sound and
music that the game generates to attract customers when it is not being played.
The music will cycle approximately every 3 minutes.
P10 = MINIMUM TICKETS
(Default 0) (Adjustable 0 – 10)
This adjustment turns the Minimum Ticket feature ON [ 01 – 10 ] or OFF [ 0 ]. If
it is set ON, it allows you to adjust the number of Minimum Tickets given.
Minimum tickets are awarded to people who would win below the minimum
tickets if calculated by P06 and their finishing score. This feature is good for
rewarding very young children who may not be able to throw the ball well enough
to win tickets. To turn the feature OFF, set it to [ 0 ]. Setting it from 1 – 10 sets the
NUMBER of minimum tickets paid out at the end of the game
P16 = MAXIMUM TICKETS
(Default 0) (Adjustable 0 – 100)
This adjustment turns the Maximum Ticket feature ON [01 – 100] or OFF [0]. If it
is set to ON it allows you to set the maximum number of tickets a player can win
in one game. This feature is useful to set the game up so that cheating players or
adult/skilled players are limited on their maximum tickets
P17 = TICKET OPTION
(Default ON) (Adjustable OFF – ON)
This adjustment turns the Ticket Option feature default setting is ON this will
allow the machine to dispense ticket when sets to OFF the machine will not
dispense any ticket regardless of the point achieved.
P18 = BALL GATE TIME OUT
(Default 0) (Adjustable 0 – 5s)
This adjustment activate the ball gate time out before the game ends default
setting is 0 this will allow the gate to close same time when the game is over,
when set to other number the gate will close x second before the game ends.

Operator's Manual – Slam'N'Jam Junior
© LAI GAMES
Page 14
A 0 1A AA
A
0 6
0 8
2 1
4
AUDITS MODE
The Audits Mode allows the operator to view statistics in all areas of the Game Play.
This enables the operator to make calculated adjustments and “Fine Tune” the
machine to maximize earning potential. The Audits mode stores bookkeeping of the
games processed since the last game audits reset. While in this mode, the game audits
can also be reset to zero.
The Slam'N'Jam Junior has three Audits that can be viewed in this mode. They are
A01, A05 & A06 and their codes and values are displayed alternatively during the
Audit Mode.
Example: Code A01 will be displayed as
A
0 1 and a value of 421 as 4 2 1 on the
3-digit display.
AUDITS MODE DIAGRAM
PROGRAMMABLE ADJUSTMENTS MODE
PRESS TEST
A
UDITS MODE
PRESS
SERVICE PRESS
SERVICE
REPEATEDLY
To step from
A01 to A06
GAME HISTORY MODE
PRESS TEST
Loops back to A01
Press and hold START button
for 5 seconds to reset All Audits

Operator's Manual – Slam'N'Jam Junior
© LAI GAMES
Page 15
AUDIT PROCEDURE
ENTER The Audits mode is entered from Programmable Adjustments mode by
pressing the Test button once or from Attract mode by pressing the
Test button five times.
A
A
A
will be displayed on the 3-digit display.
SELECT The green Service button is pressed for advancing each step through
the set of audits configurations, starting from the
A
A
A display, A01
being the first step, continuing through to A06, and then looping again
from A01 to A06 until the mode is exited.
RESET The entire set of user audits can be reset during any of the audit
configurations, by holding the Start button for longer than 5 seconds.
The displays will be cleared while still holding the button pressed and
will return to the same audit step after releasing the button. The value
of all audits will be reset to “000”.
EXIT The Audits mode is exited into Game History mode, by pressing the
Test button once.
* NOTE! *
ALL Audits will STOP INCREMENTING when the
“Total Number of Games Played”, audit A-01, reaches 999.
To restart the audits they must be reset to 000 by holding
The Start button for longer than 5 seconds while in audits mode.