Lee & Plumpton DOMINOBEAM Crescent User manual

5mm Allen Key
Quantity = 1
M8 x 30mm Coutersunk
Bzp F/0604
M6 x 12mm Button
Screw BZP F/0603
M6 Spring Washer
F/0608
M8 External Shakeproof
Washer F/0460
Plastic Beam Spacer
F/0593
4mm x 25mm Flange Pozi HSA Blk
F/0453
Plastic Foot 50mm Dia
17mm Stem Black
F/0596
Plastic Foot 80mm Dia
23mm Stem Black
F/0595
M6 x25mm Socket Cap BZP
F/0618
M6 12mm Socket Cap Bzp
F/0605
40 x 20 x 4mm Bracket
with M6 hole Zinc
F/0592
Plastic End Cap163 x 60 Black
A/0901
M6 Nut
F0594
5mm Allen Key 4mm Allen Key Pozi head Standard Screwdriver
10 x 3/4 Pozzie Flange
S/ Tap BZP
F/0619
GM6 x 12 Socket Head
Code: F/0605 Quantity = 2
Safety Guide
•The overall weight of the complete item is
+ 51kg. Apply manual handling guidelines
when building this item.
•Onlyusecomponentxingssuppliedwith
this item.
•Buildproductonaatsurface.
1. Locate part A, a Zinc Insert, into one end
of each Beam Crossrail, insert this to
achieve either a left or right hand Beam.
2. Remove Top Plate from both upright
Beam legs provided. These are secured
by 2 screws, part B and washers part C.
Put these to one side for later.
3. Holding the Round Column Leg upright
slotoneCrossrailExtensionontothe
screw protruding from the column leg.
Ensure the open side of the rail faces the
frontofthedeskandtightenoncetted
using the 4mm Allen Key. Repeat process
withsecondCrossrailExtension.
4. Attach the square plate, using part D, to
the Column Leg.
WARNING If assembling more than
one desk please refer to full Plus 1
instructions (No. 098).
5. Place the desk top face down on the
oor.TakethecompletedColumnlegturn
upside down and screw onto the desk
top using part I.
6. Stand the Beam leg upright and slot the
Beam Crossrail into the leg, as shown
in position 1, ensuring the open side of
the rail faces the front of the desk and
the access hole for the Beam Spacer is
facingtheoor.
7. Re-attach the Top Plate using part B,
screws, each with a washer, part C. Place
therstscrewintherearholetoensure
the correct positioning of the Top Plate.
WARNING It is important to ensure the
top plate is 90 degrees to the Beam
Crossrail, so that the screw holes line
up with the desk top holes.
8. Flip the leg upside down and slide the
Beam Crossrail into the left hand Crossrail
extension.Repeatsteps6,7and8forthe
remaining i-frame Beam leg and Return
Beam Crossrail.
Continue overleaf
LEE & PLUMPTON
DOMINOBEAM Assembly Instructions
DOMINOBEAM Crescent Single Desk Instructions
No. 097 A/0961
Important Information
Thisinstructionleaetissuitableforbuilding
the DOMINOBEAM Crescent desk.
2 People
Required
FPlastic Beam Spacer
Code: F/0593 Quantity = 2
E4mm x 25mm Flange Pozi (Black)
Code: F/0453 Quantity = 2
CM6 Spring Washer
Code: F/0608 Quantity = 4
Parts Required
I10 x 3/4 Flange Pozi S/Tap BZP
Code: F/0619 Quantity = 15
Pozi Head Screwdriver
Quantity = 1
4mm Allen Key
Quantity = 1
Tools needed
TOP PLATE
BM6 x 25mm Socket Cap BZP
Code: F/0618 Quantity = 4
M8 x 30mm Coutersunk
Bzp F/0604
M6 x 12mm Button
Screw BZP F/0603
M6 Spring Washer
F/0608
M8 External Shakeproof
Washer F/0460
Plastic Beam Spacer
F/0593
4mm x 25mm Flange Pozi HSA Blk
F/0453
Plastic Foot 50mm Dia
17mm Stem Black
F/0596
Plastic Foot 80mm Dia
23mm Stem Black
F/0595
M6 x25mm Socket Cap BZP
F/0618
M6 12mm Socket Cap Bzp
F/0605
40 x 20 x 4mm Bracket
with M6 hole Zinc
F/0592
Plastic End Cap163 x 60 Black
A/0901
M6 Nut
F0594
5mm Allen Key 4mm Allen Key Pozi head Standard Screwdriver
10 x 3/4 Pozzie Flange
S/ Tap BZP
F/0619
M8 x 30mm Coutersunk
Bzp F/0604
M6 x 12mm Button
Screw BZP F/0603
M6 Spring Washer
F/0608
M8 External Shakeproof
Washer F/0460
Plastic Beam Spacer
F/0593
4mm x 25mm Flange Pozi HSA Blk
F/0453
Plastic Foot 50mm Dia
17mm Stem Black
F/0596
Plastic Foot 80mm Dia
23mm Stem Black
F/0595
M6 x25mm Socket Cap BZP
F/0618
M6 12mm Socket Cap Bzp
F/0605
40 x 20 x 4mm Bracket
with M6 hole Zinc
F/0592
Plastic End Cap163 x 60 Black
A/0901
M6 Nut
F0594
5mm Allen Key 4mm Allen Key Pozi head Standard Screwdriver
10 x 3/4 Pozzie Flange
S/ Tap BZP
F/0619
M8 x 30mm Coutersunk
Bzp F/0604
M6 x 12mm Button
Screw BZP F/0603
M6 Spring Washer
F/0608
M8 External Shakeproof
Washer F/0460
Plastic Beam Spacer
F/0593
4mm x 25mm Flange Pozi HSA Blk
F/0453
Plastic Foot 50mm Dia
17mm Stem Black
F/0596
Plastic Foot 80mm Dia
23mm Stem Black
F/0595
M6 x25mm Socket Cap BZP
F/0618
M6 12mm Socket Cap Bzp
F/0605
40 x 20 x 4mm Bracket
with M6 hole Zinc
F/0592
Plastic End Cap163 x 60 Black
A/0901
M6 Nut
F0594
5mm Allen Key 4mm Allen Key Pozi head Standard Screwdriver
10 x 3/4 Pozzie Flange
S/ Tap BZP
F/0619
M8 x 30mm Coutersunk
Bzp F/0604
M6 x 12mm Button
Screw BZP F/0603
M6 Spring Washer
F/0608
M8 External Shakeproof
Washer F/0460
Plastic Beam Spacer
F/0593
4mm x 25mm Flange Pozi HSA Blk
F/0453
Plastic Foot 50mm Dia
17mm Stem Black
F/0596
Plastic Foot 80mm Dia
23mm Stem Black
F/0595
M6 x25mm Socket Cap BZP
F/0618
M6 12mm Socket Cap Bzp
F/0605
40 x 20 x 4mm Bracket
with M6 hole Zinc
F/0592
Plastic End Cap163 x 60 Black
A/0901
M6 Nut
F0594
5mm Allen Key 4mm Allen Key Pozi head Standard Screwdriver
10 x 3/4 Pozzie Flange
S/ Tap BZP
F/0619
M8 x 30mm Coutersunk
Bzp F/0604
M6 x 12mm Button
Screw BZP F/0603
M6 Spring Washer
F/0608
M8 External Shakeproof
Washer F/0460
Plastic Beam Spacer
F/0593
4mm x 25mm Flange Pozi HSA Blk
F/0453
Plastic Foot 50mm Dia
17mm Stem Black
F/0596
Plastic Foot 80mm Dia
23mm Stem Black
F/0595
M6 x25mm Socket Cap BZP
F/0618
M6 12mm Socket Cap Bzp
F/0605
40 x 20 x 4mm Bracket
with M6 hole Zinc
F/0592
Plastic End Cap163 x 60 Black
A/0901
M6 Nut
F0594
5mm Allen Key 4mm Allen Key Pozi head Standard Screwdriver
10 x 3/4 Pozzie Flange
S/ Tap BZP
F/0619
M8 x 30mm Coutersunk
Bzp F/0604
M6 x 12mm Button
Screw BZP F/0603
M6 Spring Washer
F/0608
M8 External Shakeproof
Washer F/0460
Plastic Beam Spacer
F/0593
4mm x 25mm Flange Pozi HSA Blk
F/0453
Plastic Foot 50mm Dia
17mm Stem Black
F/0596
Plastic Foot 80mm Dia
23mm Stem Black
F/0595
M6 x25mm Socket Cap BZP
F/0618
M6 12mm Socket Cap Bzp
F/0605
40 x 20 x 4mm Bracket
with M6 hole Zinc
F/0592
Plastic End Cap163 x 60 Black
A/0901
M6 Nut
F0594
5mm Allen Key 4mm Allen Key Pozi head Standard Screwdriver
10 x 3/4 Pozzie Flange
S/ Tap BZP
F/0619
M8 x 30mm Coutersunk
Bzp F/0604
M6 x 12mm Button
Screw BZP F/0603
M6 Spring Washer
F/0608
M8 External Shakeproof
Washer F/0460
Plastic Beam Spacer
F/0593
4mm x 25mm Flange Pozi HSA Blk
F/0453
Plastic Foot 50mm Dia
17mm Stem Black
F/0596
Plastic Foot 80mm Dia
23mm Stem Black
F/0595
M6 x25mm Socket Cap BZP
F/0618
M6 12mm Socket Cap Bzp
F/0605
40 x 20 x 4mm Bracket
with M6 hole Zinc
F/0592
Plastic End Cap163 x 60 Black
A/0901
M6 Nut
F0594
5mm Allen Key 4mm Allen Key Pozi head Standard Screwdriver
10 x 3/4 Pozzie Flange
S/ Tap BZP
F/0619
AZinc Insert
Code: F0594 Quantity = 2
Step 6: Position 1
Single desk
M8 x 30mm Coutersunk
Bzp F/0604
M6 x 12mm Button
Screw BZP F/0603
M6 Spring Washer
F/0608
M8 External Shakeproof
Washer F/0460
Plastic Beam Spacer
F/0593
4mm x 25mm Flange Pozi HSA Blk
F/0453
Plastic Foot 50mm Dia
17mm Stem Black
F/0596
Plastic Foot 80mm Dia
23mm Stem Black
F/0595
M6 x25mm Socket Cap BZP
F/0618
M6 12mm Socket Cap Bzp
F/0605
40 x 20 x 4mm Bracket
with M6 hole Zinc
F/0592
Plastic End Cap163 x 60 Black
A/0901
M6 Nut
F0594
5mm Allen Key 4mm Allen Key Pozi head Standard Screwdriver
10 x 3/4 Pozzie Flange
S/ Tap BZP
F/0619
M8 x 30mm Coutersunk
Bzp F/0604
M6 x 12mm Button
Screw BZP F/0603
M6 Spring Washer
F/0608
M8 External Shakeproof
Washer F/0460
Plastic Beam Spacer
F/0593
4mm x 25mm Flange Pozi HSA Blk
F/0453
Plastic Foot 50mm Dia
17mm Stem Black
F/0596
Plastic Foot 80mm Dia
23mm Stem Black
F/0595
M6 x25mm Socket Cap BZP
F/0618
M6 12mm Socket Cap Bzp
F/0605
40 x 20 x 4mm Bracket
with M6 hole Zinc
F/0592
Plastic End Cap163 x 60 Black
A/0901
M6 Nut
F0594
5mm Allen Key 4mm Allen Key Pozi head Standard Screwdriver
10 x 3/4 Pozzie Flange
S/ Tap BZP
F/0619
60mm Beam Attactment Zinc
F/0594
HZinc Nut
Code: F/0494 Quantity = 2
10mm Spanner
Quantity = 1
E
F
G
H45mm Screw F/0587
Quantity = 16
70mm Screw F/0591
Quantity = 16
GLIDE BUFFER S/0019
Quantity = 32
5/8 x 8g Pan Pozi
BZP F/0414
Quantity = 2
Bracket Insert X/0027
50mm M8 Bolt F/0597
25mm M8 Bolt F/0589
35mm M8 Bolt F/0590
M8 Spring Washer F/0542
M8 Washer F/0598
Set S1
Set S2
Set S3
Pozi head Standard Screwdriver
Quantity = 1
T Bar Allen Key
M8 x 30mm Coutersunk
Bzp F/0604
M6 x 12mm Button
Screw BZP F/0603
M6 Spring Washer
F/0608
M8 External Shakeproof
Washer F/0460
Plastic Beam Spacer
F/0593
4mm x 25mm Flange Pozi HSA Blk
F/0453
Plastic Foot 50mm Dia
17mm Stem Black
F/0596
Plastic Foot 80mm Dia
23mm Stem Black
F/0595
M6 x25mm Socket Cap BZP
F/0618
M6 12mm Socket Cap Bzp
F/0605
40 x 20 x 4mm Bracket
with M6 hole Zinc
F/0592
Plastic End Cap163 x 60 Black
A/0901
M6 Nut
F0594
5mm Allen Key 4mm Allen Key Pozi head Standard Screwdriver
10 x 3/4 Pozzie Flange
S/ Tap BZP
F/0619
M8 x 30mm Coutersunk
Bzp F/0604
M6 x 12mm Button
Screw BZP F/0603
M6 Spring Washer
F/0608
M8 External Shakeproof
Washer F/0460
Plastic Beam Spacer
F/0593
4mm x 25mm Flange Pozi HSA Blk
F/0453
Plastic Foot 50mm Dia
17mm Stem Black
F/0596
Plastic Foot 80mm Dia
23mm Stem Black
F/0595
M6 x25mm Socket Cap BZP
F/0618
M6 12mm Socket Cap Bzp
F/0605
40 x 20 x 4mm Bracket
with M6 hole Zinc
F/0592
Plastic End Cap163 x 60 Black
A/0901
M6 Nut
F0594
5mm Allen Key 4mm Allen Key Pozi head Standard Screwdriver
10 x 3/4 Pozzie Flange
S/ Tap BZP
F/0619
DM8 X 30mm Countersunk BZP
Code: F/0604 Quantity = 3
Step 7: Top Plate (Standard Beam Leg)
Top Plate MUST be
positioned 90 degrees to
the Beam Crossrail
Step 3 & 4: Round Column Leg
D
LEFT HAND DESK SHOWN
B
B
Step 1: Zinc Insert
A
CROSSRAIL
EXTENSION
CROSSRAIL
EXTENSION
B
C
B
C
I-FRAME
BEAM LEG
OUTER
COVER
PLATE
BEAM CROSSRAIL
ACCESS HOLE FOR
BEAM SPACER
RETURN BEAM
CROSSRAIL
BEAM LEG
II
REAR HOLE
TOP PLATE

A
B
A
B
LEE & PLUMPTON DOMINOBEAM Crescent Single Desk Instructions
No. 097 A/0961
9. Use part G with part H, zinc nut, to secure
the Beam frame where the two sections
slide together.
10. Using part Eattach both plastic Beam
spacers, part F, loosely.
11. Secure the desk top to the frame using
part I. Line up the screws and hand
tighten until all screws are located in the
correct places.
12. Tighten all parts Iand the secure the
Beam Spacer to the desk top.
13. Flip desk into the upright position.
14. At this point adjust the feet to ensure the
product is level, this can be done by hand.
15. The Beam desk is now complete.
Hints & Tips
Cable Management
Once the Beam desk is complete, simply
feed the wires that you require to run
through the desk via the cable ports and
down through the cable trunking in the legs.
Optional horizontal cable management is
availableuponrequestandthissimplyts
into the open side of the Beam Crossrail.
Access points to the Beam leg are located
behind the inner and outer cover plates.
Step 10: Plastic Beam Spacer
E
F
I
I
I
I
I
I
I
I
I
I
I
I
ACCESS HOLE FOR
BEAM SPACER
II G
G
HH
ACCESS HOLE FOR
BEAM SPACER
A
B
Step 9: Securing Beam Frame
IIG
G
HH
E
E