Lee & Plumpton Signature Storage Bookcase User manual

1
A/1876 Revision A 06/12/2017
COMPONENT PARTS
www.leeandplumpton.co.uk
ASSEMBLY INSTRUCTIONS
RANGE Signature Storage, Bookcases.
REF: 740mm High, 1000mm High, 1200mm High,
1600mm High, 1800mm High and 2000mm High
800mm and 1000mm Wide
Read this leaet before
assembly
2 People
Required
Item 4
STO1_710
Top Panel
Qty 1
Item 5
STO1_709
Bottom Panel
Qty 1
Item 6
STO1_737
Shelf
Qty, (See Table 01)
Item 3
STO1_727
RH Side Panel
Qty 1
Item 1
STO1_658
Back Panel
Qty 1
Item 2
STO1_726
LH Side Panel
Qty 1
Item 8
F.0629
Rapid Dowel (Blue)
Qty, (See Table 1)
Item 9
F.0630
Rastex Cam
Qty, (See Table 1)
Item 10
F.0431
Wood Dowel
Qty 6
Item 11
F.0436, F.0446, F.0545
F.0575, F.0576, F.0577
Cam Cover
Qty, (See Table 1)
Item 12
A.1805
J Insert Nut
Qty 2
Item 13
A.1804
Leveller Screw
Qty 2
Item 14
F.0564
Shelf Support
Qty, (See Table 1)
Item 15
F.0475
3/4”x10g Pan Pozi BZP
Qty 8
Item 16
F.0492
16mm Euro Screw
Qty, (See Table 1)

2
A/1876 Revision A 06/12/2017
TOOLS REQUIRED BEFORE YOU BEGIN...
• Check you have all the tools and components required
• Keep children and animals away from small parts
• Ensure you have adequate space
• Assemble product on a at, clean surface
• Apply manual handling guidelines when building this item
COMPONENT PART QUANTITIES FOR UNIT SIZE VARIATIONS (TABLE 1)
• Pozi head screwdriver
STEP 1
ASSEMBLY INSTRUCTIONS
DL
DS
ITEM W800 x H740 mm W1000 x H740 mm W800 x H1000mm W1000 x H1000 mm W 800 x H1200 mm W1000 x H1200 mm
6 1 1 1 1 2 2
14 4545810
16 4545810
818 20 20 22 20 22
918 20 20 22 20 22
11 18 20 20 22 20 22
ITEM W800 x H1600 mm W1000 x H1600 mm W800 x H1800mm W1000 x H1800 mm W 800 x H2000 mm W1000 x H2000 mm
6 334444
14 12 15 16 20 16 20
16 12 15 16 20 16 20
822 24 22 24 22 24
922 24 22 24 22 24
11 22 24 22 24 22 24
IMPORTANT
All units must be xed to the wall for stability.
9
Lay the panels at on a soft
surface. Ensure the holes are free
of debris.
In the back panel (1) insert the
appropriate number of Cams (9)
and Wooden Dowels (10).
Ensure the arrow on the Cams
points towards the edge of the
panel.
In both the Sides push in the
appropriate number of Spreading
Dowels (8) and wooden dowels.
On the Side panels, the larger gap
between the Cam hole and the
back edge (DL) is at the bottom.
10
8
3
2
1
If the unit is 1000mm wide,
the 2 holes in the back panel
need to be at the bottom of the
bookcase.

3
A/1876 Revision A 06/12/2017
ASSEMBLY INSTRUCTIONS
STEP 2
STEP 3
CARE AND MAINTENANCE
5
4
In the Top (4) and Base (5) push
in the appropriate number of
Spreading Dowels.
Attach the Top and Base to the
Back/Sides. Lock the Cams with a
half-turn.
Decide where the Shelves are to
be tted and identify the holes in
the Sides (and Back if the unit is
1000mm wide). Using Screw (16)
t the Shelf Support (14) to the
Side (& Back). Lay the Shelf (6) on
the Supports.
The Bookcase can be adjusted for
levelling by turning the screw head
in the front corner of the Base
panel. There may be a Cover Cap
which will need to be removed to
access the screw head.
14
16
Clean using a damp cloth and mild detergent – do not use abrasive cleaners or bleach.