Lee & Plumpton Domino Beam Wooden Modesty User manual

No. 140 A/2287 Revision A 20/03/2020 1
www.leeandplumpton.co.uk
ASSEMBLY INSTRUCTIONS
RANGE Domino Beam Wooden Modesty
REF: All modesty sizes for Domino Beam Desks
Read this leaet before
assembly
2 People
Required
COMPONENT PARTS
COMPONENT PART QUANTITIES FOR UNIT SIZE VARIATIONS (TABLE 1)
Item 1
Large Modesty Panel
Qty 1
Item 2
Small Modesty Panel
Qty See Table 1
Item 3
F.0603
M6x12mm Button
Screw
Qty See Table 1
Item 4
F.0605
M6x12mm Socket
Cap
Qty See Table 1
Item 5
F.0619
10x3/4 Pozi Flange
Screw
Qty See Table 1
Item 6
DOM/001
Mod Z Bracket
Qty See Table 1
Item 7
DOM/002
Mod L Bracket
Qty See Table 1
Item 8
DOM/003
Mod L-Slot Bracket
Qty See Table 1
ITEM All Cresents All Waves/
Rectangular Desks
21 0
38 4
42 1
54 2
62 1
72 1
82 1
NOTE
The process for attaching the smaller
modesty to the desk is the exact same
process for the large modesty. For
simplicity we shall only show the larger
modesty being attached.

No. 140 A/2287 Revision A 20/03/2020 2
TOOLS REQUIRED BEFORE YOU BEGIN...
• Check you have all the tools and components required
• Keep children and animals away from small parts
• Ensure you have adequate space
• Assemble product on a at, clean surface
• Apply manual handling guidelines when building this item
• Pozi head screwdriver
STEP 1
STEP 2
STEP 3
ASSEMBLY INSTRUCTIONS
Ensure the holes are near
the top of the modesty panel
as shown. Attach the Mod
L-Slot Bracket (8) to the
modesty panel (1) by using
two srews (3).
Attach the Mod L Bracket (7)
to the Modesty in the bottom
hole only, by using one screw
(3)
Place the modesty (1)in to
position as shown right.
Afx the modesty panel to
the desk top with two screws
(5) via the two holes in the
top of the Modesty L-Bracket
(7)
8
1
3
7
3
1
5
7

No. 140 A/2287 Revision A 20/03/2020 3
STEP 4
STEP 5
ASSEMBLY INSTRUCTIONS
Fix the Modesty L-Slot
Bracket (8) to the cross bar
by using one socket cap
screw (4).
Fix the Z Bracket (6) to
the modesty panel via the
L-Bracket (7) with one screw
(3), ensuring that it is held
securely against the cross
bar.
CARE AND MAINTENANCE
Clean using a damp cloth and mild detergent – do not use abrasive cleaners or bleach.
84
6
7
3