Lee & Plumpton InMotion Single Electric 1200 User manual

1
No.126 A/2223 Revision A 08/05/2019
www.leeandplumpton.co.uk
ASSEMBLY INSTRUCTIONS
RANGE InMotion Single Electric
REF: 1200, 1400, 1600, 1800mm Wide.
Read this leaet before
assembly
2 People
Required
FIXINGS
TOOLS REQUIRED BEFORE YOU BEGIN...
• Check you have all the tools and components required
• Keep children and animals away from small parts
• Ensure you have adequate space
• Assemble product on a at, clean surface
• Apply manual handling guidelines when building this item
• Pozi head screwdriver
• 5mm Allen key
• 6mm Allen key
• 10mm spanner
STEP 1
ASSEMBLY INSTRUCTIONS
9
A. Attach the long rail to the
desktop using screws (9).
IMPORTANT: There are screw
holes in the rail for cable trays and
these must face towards the back
of the desk. Please ensure that the
holes are positioned as far away
from the underside of the desktop
as possible.
B. Place the motor brackets into
position using screws (2).
Then use socket cap bolts (3)
and socket shoulder screws (4)
to attach each leg column to a
motor bracket and the rail.
A.
B.
3
Long rail
Long rail
2
4
Item 1
R/0161
Motor Bracket
Qty 2
Item 2
F/0415
M6x20 Pan Posi Bzp
Qty 4
Item 3
F/0663
M8x10 Socket Cap Bolt Bzp
Qty 4
Item 4
F/0664
M8x10 Socket Shoulder Screw
Qty 4
Item 5
A/2219
Cable Clamp
Qty 3
Item 6
F/0453
4x25mm Flange Pozi
Qty 3
Item 7
F/0662
M6x20 Hexagon Bolt Bzp
Qty 8
Item 8
F/0475
3-4 x10g Pan Pozi Bzp
Qty 12
Item 9
F/0591
5x70 Pan Head Bzp
Qty 4

2
No.126 A/2223 Revision A 08/05/2019
STEP 2
ASSEMBLY INSTRUCTIONS
STEP 3
CARE AND MAINTENANCE
STEP 4
STEP 5
A.B.
Attach the left and right side
plates using screws (8).
A. Attach the power pack to the
underside of the desk using
screws (8) (position left or
right).
B. Fix the cable tidy clamps (5)
into position using (6).
8
Side Plates
Clean using a damp cloth and mild detergent – do not use abrasive cleaners or bleach.
Screw the control switch to the
underside of the desk using (8)
(position left or right).
Tighten the bolts (7) on the foot
plates.
Using two people, carefully rotate
the desk (away from the switch
mechanism) on to the feet.
8
6
5
8
Control Switch
7
Foot Plate