Lee & Plumpton DOMINOBEAM User manual

B
B
OUTER
COVER
PLATE
Safety Guide
•Apply manual handling guidelines when
building this item.
•Weight 45kgs
•Onlyusecomponentxingssuppliedwith
this item.
•Buildproductonaatsurface.
Recommendations
Levelling the Beam desk
Itisimportanttolevelthefeetatthestartand
naliseattheendtoensuretheproductis
level. This can be done by hand.
1. Ensure part A, a Zinc Insert, is present in
eachendoftheBeamCrossrail,thismust
be inserted as shown in diagram
(Step1:ZincInsert)ifitisnotalready
present.
2. RemovetheTopPlatefrombothupright
I-Frame Beam legs provided. These are
secured by 2 screws, part B, and washers
part C.Putthesetoonesideforlater.
3. Keeping one I-Frame Beam leg upright,
slot the Beam Crossrail into the leg, as
shown in position 1, ensuring the open
sideoftherailfacesthefrontofthetable
andtheaccessholefortheBeamSpacer
isfacingtheoor.
4. Re-attach the Top Plate to each leg and
secure using part Bscrews each with
a washer, part C. Remember to place
therstscrewintherearholetoensure
thecorrectpositioningoftheTopPlate.
WARNING It is important to ensure the
top plate is 90 degrees to the beam
Crossrail, so that the screw holes line
up with the desk top holes.
Continue overleaf
LEE & PLUMPTON
DOMINOBEAM Assembly Instructions
DOMINOBEAM Table Instructions
No. 099 A/0963
Important Information
Thisinstructionleaetissuitableforbuilding
the DOMINOBEAM Table including the plus
one option. 2 People
Required
EPlastic Beam Spacer
Code: F/0593 Quantity = 1
D4mm x 25mm Flange Pozi (Black)
Code: F/0453 Quantity = 1
CM6 Spring Washer
Code: F/0608 Quantity = 4
Parts Required
F10 x 3/4 Flange Pozi S/Tap BZP
Code: F/0619 Quantity = 12
Pozi Head Screwdriver
Quantity = 1
5mm Allen Key
Quantity = 1
Tools needed
BM6 x 25mm Socket Cap BZP
Code: F/0618 Quantity = 4
M8 x 30mm Coutersunk
Bzp F/0604
M6 x 12mm Button
Screw BZP F/0603
M6 Spring Washer
F/0608
M8 External Shakeproof
Washer F/0460
Plastic Beam Spacer
F/0593
4mm x 25mm Flange Pozi HSA Blk
F/0453
Plastic Foot 50mm Dia
17mm Stem Black
F/0596
Plastic Foot 80mm Dia
23mm Stem Black
F/0595
M6 x25mm Socket Cap BZP
F/0618
M6 12mm Socket Cap Bzp
F/0605
40 x 20 x 4mm Bracket
with M6 hole Zinc
F/0592
Plastic End Cap163 x 60 Black
A/0901
M6 Nut
F0594
5mm Allen Key 4mm Allen Key Pozi head Standard Screwdriver
10 x 3/4 Pozzie Flange
S/ Tap BZP
F/0619
M8 x 30mm Coutersunk
Bzp F/0604
M6 x 12mm Button
Screw BZP F/0603
M6 Spring Washer
F/0608
M8 External Shakeproof
Washer F/0460
Plastic Beam Spacer
F/0593
4mm x 25mm Flange Pozi HSA Blk
F/0453
Plastic Foot 50mm Dia
17mm Stem Black
F/0596
Plastic Foot 80mm Dia
23mm Stem Black
F/0595
M6 x25mm Socket Cap BZP
F/0618
M6 12mm Socket Cap Bzp
F/0605
40 x 20 x 4mm Bracket
with M6 hole Zinc
F/0592
Plastic End Cap163 x 60 Black
A/0901
M6 Nut
F0594
5mm Allen Key 4mm Allen Key Pozi head Standard Screwdriver
10 x 3/4 Pozzie Flange
S/ Tap BZP
F/0619
M8 x 30mm Coutersunk
Bzp F/0604
M6 x 12mm Button
Screw BZP F/0603
M6 Spring Washer
F/0608
M8 External Shakeproof
Washer F/0460
Plastic Beam Spacer
F/0593
4mm x 25mm Flange Pozi HSA Blk
F/0453
Plastic Foot 50mm Dia
17mm Stem Black
F/0596
Plastic Foot 80mm Dia
23mm Stem Black
F/0595
M6 x25mm Socket Cap BZP
F/0618
M6 12mm Socket Cap Bzp
F/0605
40 x 20 x 4mm Bracket
with M6 hole Zinc
F/0592
Plastic End Cap163 x 60 Black
A/0901
M6 Nut
F0594
5mm Allen Key 4mm Allen Key Pozi head Standard Screwdriver
10 x 3/4 Pozzie Flange
S/ Tap BZP
F/0619
M8 x 30mm Coutersunk
Bzp F/0604
M6 x 12mm Button
Screw BZP F/0603
M6 Spring Washer
F/0608
M8 External Shakeproof
Washer F/0460
Plastic Beam Spacer
F/0593
4mm x 25mm Flange Pozi HSA Blk
F/0453
Plastic Foot 50mm Dia
17mm Stem Black
F/0596
Plastic Foot 80mm Dia
23mm Stem Black
F/0595
M6 x25mm Socket Cap BZP
F/0618
M6 12mm Socket Cap Bzp
F/0605
40 x 20 x 4mm Bracket
with M6 hole Zinc
F/0592
Plastic End Cap163 x 60 Black
A/0901
M6 Nut
F0594
5mm Allen Key 4mm Allen Key Pozi head Standard Screwdriver
10 x 3/4 Pozzie Flange
S/ Tap BZP
F/0619
M8 x 30mm Coutersunk
Bzp F/0604
M6 x 12mm Button
Screw BZP F/0603
M6 Spring Washer
F/0608
M8 External Shakeproof
Washer F/0460
Plastic Beam Spacer
F/0593
4mm x 25mm Flange Pozi HSA Blk
F/0453
Plastic Foot 50mm Dia
17mm Stem Black
F/0596
Plastic Foot 80mm Dia
23mm Stem Black
F/0595
M6 x25mm Socket Cap BZP
F/0618
M6 12mm Socket Cap Bzp
F/0605
40 x 20 x 4mm Bracket
with M6 hole Zinc
F/0592
Plastic End Cap163 x 60 Black
A/0901
M6 Nut
F0594
5mm Allen Key 4mm Allen Key Pozi head Standard Screwdriver
10 x 3/4 Pozzie Flange
S/ Tap BZP
F/0619
M8 x 30mm Coutersunk
Bzp F/0604
M6 x 12mm Button
Screw BZP F/0603
M6 Spring Washer
F/0608
M8 External Shakeproof
Washer F/0460
Plastic Beam Spacer
F/0593
4mm x 25mm Flange Pozi HSA Blk
F/0453
Plastic Foot 50mm Dia
17mm Stem Black
F/0596
Plastic Foot 80mm Dia
23mm Stem Black
F/0595
M6 x25mm Socket Cap BZP
F/0618
M6 12mm Socket Cap Bzp
F/0605
40 x 20 x 4mm Bracket
with M6 hole Zinc
F/0592
Plastic End Cap163 x 60 Black
A/0901
M6 Nut
F0594
5mm Allen Key 4mm Allen Key Pozi head Standard Screwdriver
10 x 3/4 Pozzie Flange
S/ Tap BZP
F/0619
M8 x 30mm Coutersunk
Bzp F/0604
M6 x 12mm Button
Screw BZP F/0603
M6 Spring Washer
F/0608
M8 External Shakeproof
Washer F/0460
Plastic Beam Spacer
F/0593
4mm x 25mm Flange Pozi HSA Blk
F/0453
Plastic Foot 50mm Dia
17mm Stem Black
F/0596
Plastic Foot 80mm Dia
23mm Stem Black
F/0595
M6 x25mm Socket Cap BZP
F/0618
M6 12mm Socket Cap Bzp
F/0605
40 x 20 x 4mm Bracket
with M6 hole Zinc
F/0592
Plastic End Cap163 x 60 Black
A/0901
M6 Nut
F0594
5mm Allen Key 4mm Allen Key Pozi head Standard Screwdriver
10 x 3/4 Pozzie Flange
S/ Tap BZP
F/0619
AZinc Insert
Code: F/0594 Quantity = 2
B
B
Step 1: Zinc Insert
BEAM CROSSRAIL
INNER COVER PLATE
I-FRAME
BEAM LEG
Step 3: Position 1
Single table
A
C
C
B
C
B
C
Step 4: Top Plate
TOP PLATE
ACCESS HOLE FOR
BEAM SPACER
M8 x 30mm Coutersunk
Bzp F/0604
M6 x 12mm Button
Screw BZP F/0603
M6 Spring Washer
F/0608
M8 External Shakeproof
Washer F/0460
Plastic Beam Spacer
F/0593
4mm x 25mm Flange Pozi HSA Blk
F/0453
Plastic Foot 50mm Dia
17mm Stem Black
F/0596
Plastic Foot 80mm Dia
23mm Stem Black
F/0595
M6 x25mm Socket Cap BZP
F/0618
M6 12mm Socket Cap Bzp
F/0605
40 x 20 x 4mm Bracket
with M6 hole Zinc
F/0592
Plastic End Cap163 x 60 Black
A/0901
M6 Nut
F0594
5mm Allen Key 4 mmAl len Key Pozi head Standard Screwdriver
10 x 3/4 Pozzie Flange
S/ Tap BZP
F/0619
60mm Beam Attactment Zinc
F/0594
Top Plate MUST be
positioned 90 degrees
to the Beam Crossrail

A
Step 5: Plastic Beam Spacer
LEE & PLUMPTON DOMINOBEAM Table Instructions
No. 099 A/0963
5. Using part Dattach the plastic Beam
spacer, part Eloosely.
6. Placethetabletopfacedownontothe
oor.FliptheassembledBeamframeover
and place on to the table top. Secure the
tabletoptotheframeusingpartF. Line
up the screws and hand tighten until all
screws are located in the correct places.
7. Tighten all parts Fand secure the Beam
Spacer to the table top.
8. Flip table into the upright position.
9. Atthispointadjustthefeettoensurethe
product is level, this can be done by hand.
10. The Beam table is now complete.
F
F
F
F
F
F
F
F
F
F
F
F
Hints & Tips
Cable Management
Once the Beam table is complete, simply
feedthewiresthatyourequiretorun
through the desk via the cable ports and
down through the cable trunking in the legs.
Optional horizontal cable management is
availableuponrequestandthissimplyts
intotheopensideoftheBeamCrossrail.
Access points to the Beam leg are located
behind the inner and outer cover plates.
D
E