LEGRAND ECONOMY EXIT SIGN ER2 User manual

Specifications:
Cat No. 684447, 684449, 684454,
684474, 684478, 684480
Supply Voltage 230-240V a.c.
Frequency 50Hz
Power Input Watts (max)
Watts (low rate charge)
Application:
This product is designed and tested to comply with AS2293.3
(2005) Appendix C (Photometric) and Appendix D (thermal) as an
Emergency Exit sign for single or double-sided applications. It
is a single-point unit for non-network applications. Selection of
mounting location, height and spacings should be undertaken
in accordance with the requirements of relevant local codes and
standards. Emergency classification can be determined from
Legrand literature web-site and product labelling. This sign is
suited to Maintained or Non-Maintained operation, according to
input connections.
ER2 ECONOMY EXIT SIGN
INSTALLATION INSTRUCTIONS
Dimensions:
Product preparation
Wall-mounted
Ceiling-mounted
24m
legrand
Mounting holes
292mm
94mm
50
mm 50 mm
180mm
377mm 180mm
178mm
50mm
377mm
Single sided (wall mount) Double sided (ceiling mount)

ER2 ECONOMY EXIT SIGN
INSTALLATION INSTRUCTIONS
Repair & Upgrade:
ER2 is designed to be upgraded in the future by replacement of the
Battery Pack, LED light engine or Power Supply as required.
Due to ongoing improvements in technology, the components
available may change. For current information, please consult the
HPM Legrand website or an authorised maintenance provider.
Replacements Parts:
686240 Battery Pack AA4LNICD
686260 LED replacement strip
Main supply connection
Warranty
HPM will honour all statutory guarantees that you as a consumer
are entitled to rely upon under the Australian Consumer Law
against a manufacturer including a guarantee that this product is
of acceptable quality.
To make a claim under any statutory guarantee you should first
contact the supplier, or retailer from whom you purchased the
Product.
Customer Service
For all Customer Service and Technical Support enquires please
call Monday to Friday during business hours.
HPM Legrand Australia
1300 369 777
www.hpmlegrand.com.au
HPM Legrand New Zealand
0800 476 009
www.hpmlegrand.co.nz
ABN: 31 000 102 661
Diffuser sheet installation
24m
legrand
24m
legrand
Diffuser mounting
Unswitched
active
Neutral
Earth
Brown
Black
Active
Green/Yellow
Red
10mm
!Active and unswitched active must be on same phase
‘Maintained’ operation, link switched active with unswitched active