Leviton EC32A User manual

Product Description
The replacement cord is 18 feet in length.
Only use EC32A as a replacement cord for Leviton's EV320 and EV32W
Charging Stations.
Only use EC48A as a replacement cord for Leviton's EV480 and EV48W
Charging Stations.
32 Amp and 80 Amp EV Charging Replacement Cord
Cat. Nos. EC32A and EC48A
INSTALLATION INSTRUCTIONS ENGLISH
PK-A3458-10-00-5A
WARNINGS:
• TO AVOID FIRE, SHOCK OR DEATH:TURN OFF POWER AT CIRCUIT BREAKER OR
FUSE AND TEST THAT THE POWER IS OFF BEFORE WIRING!
• TO AVOID PERSONAL INJURY OR PROPERTY DAMAGE, DO NOT install to control a
receptacle, or a load in excess of the specied rating.
• To be installed and/or used in accordance with electrical codes and regulations.
• If you are not sure about any part of these instructions, consult an electrician.
CAUTIONS:
• To avoid damage to the product, DO NOT use disinfecting products, including foggers,
sprays or other types of atomized cleaning agents.
• DO NOT spray liquid onto the product.
• To clean use a damp cloth with mild soap.
• No user serviceable components. DO NOT attempt to service or repair.
• Use this device WITH COPPER OR COPPER CLAD WIRE ONLY.
Remove Cord
WARNING: TO AVOID FIRE, SHOCK OR DEATH, turn OFF power at circuit
breaker or fuse and test that the power is OFF before wiring.
1. Loosen 13 screws on back cover and remove front cover.
2. Remove three screws and cord terminal lugs from circuit
board. Unplug CP cable.
CP Cable
Terminal
Lugs
3. Loosen two screws on clamping plate.
4. Loosen gland cap and remove cord.
Tools Required:
• Phillips Screwdriver • Adjustable Wrench
Screws
Clamping
Plate
WEB VERSION

© 2023 Leviton Mfg. Co., Inc.
4. Install front cover to back cover and secure with 13 screws. Torque
screws to 8.5 - 10.5 in-lbs.
5. Tighten gland cap to seal.
Torque gland cap to 8.5 - 10.5 in-lbs.
2. Plug CP cable into circuit board. Install cord terminal lugs to circuit board
with three screws. Torque screws to 8.5 - 10.5 in-lbs.
3. Tighten two screws securing clamping plate. Torque screws to 8.5 - 10.5 in-lbs.
NOTE: When installing EC32A 32 Amp replacement cord, concave side
faces front cover.
1. Position gland cap on cord and feed cord through gland and clamping
plate.
Install Replacement Cord
WARNING: TO AVOID FIRE, SHOCK OR DEATH, turn OFF power at circuit
breaker or fuse and test that the power is OFF before wiring.
CP Cable
Terminal
Lugs
For Technical Assistance Call: 1-800-824-3005 (USA Only) or
1-800-405-5320 (Canada Only) www.leviton.com
LIMITED 1 YEAR WARRANTY AND EXCLUSIONS
Leviton warrants to the original consumer purchaser and not for the benet of anyone else that
this product at the time of its sale by Leviton is free of defects in materials and workmanship
under normal and proper use for one year from the purchase date. Leviton’s only obligation
is to correct such defects by repair or replacement, at its option. For details visit www.
leviton.com or call 1-800-824-3005. This warranty excludes and there is disclaimed
liability for labor for removal of this product or reinstallation. This warranty is void if this
product is installed improperly or in an improper environment, overloaded, misused, opened,
abused, or altered in any manner, or is not used under normal operating conditions or not in
accordance with any labels or instructions.There are no other or implied warranties of any
kind, including merchantability and tness for a particular purpose, but if any implied
warranty is required by the applicable jurisdiction, the duration of any such implied warranty,
including merchantability and tness for a particular purpose, is limited to one year. Leviton
is not liable for incidental, indirect, special, or consequential damages, including
without limitation, damage to, or loss of use of, any equipment, lost sales or prots
or delay or failure to perform this warranty obligation.The remedies provided herein are
the exclusive remedies under this warranty, whether based on contract, tort or otherwise.
Screws
EC48A
Clamping
Plate
Postition
FOR CANADA ONLY
For warranty information and/or product returns, residents of Canada should contact
Leviton in writing at Leviton Manufacturing of Canada ULC to the attention of the Quality
Assurance Department, 165 Hymus Blvd, Pointe-Claire (Quebec), Canada H9R 1E9 or
by telephone at 1 800 405-5320.
WEB VERSION