Life Span QUANTUM 2 User manual

NOTE: This manual may be subject to updates or changes. Up to date manuals are available through our website at www.lifespanfitness.com.au
Product may vary slightly from the item pictured due to model upgrades
Read all instructions carefully before using this product. Retain this owner’s manual for
future reference.
QUANTUM 2 INVERSION TABLE
OWNER’S MANUAL

2
Quantum 2 Inversion Table
TABLE OF CONTENTS
1. IMPORTANT SAFETY INSTRUCTIONS 3
2. CARE INSTRUCTIONS 4
3. EXPLODED DIAGRAM 5
4. PARTS LIST 6
5. ASSEMBLY INSTRUCTIONS 7
6. WARRANTY 12
7. WARRANTY 13

3
Quantum 2 Inversion Table
1. IMPORTANT SAFETY INSTRUCTIONS
WARNING - Read all instructions before using this machine.
It is important your machine receives regular maintenance to prolong its useful life. Failing to
regularly maintain your machine may void your warranty.
Please keep this manual with you at all times
a. It is important to read this entire manual before assembling and using the equipment. Safe and
effective use can only be achieved if the equipment is assembled, maintained and used properly.
Please note: It is your responsibility to ensure that all users of the equipment are informed of all
warnings and precautions.
b. Before starting any exercise program you should consult your doctor to determine if you have any
medical or physical conditions that could put your health and safety at risk, or prevent you from using
the equipment properly. Your doctor’s advice is essential if you are taking medication that affects your
heart rate, blood pressure or cholesterol level.
c. Be aware of your body’s signals. Incorrect or excessive exercise can damage your health. Stop
exercising if you experience any of the following symptoms: pain, tightness in your chest, irregular
heartbeat, and extreme shortness of breath, lightheadedness, dizziness or feelings of nausea. If you do
experience any of these symptoms, you should consult your doctor before continuing with your
exercise program.
d. Keep children and pets away from the equipment. This equipment is designed for adult use only.
e. Use the equipment on a solid, flat level surface with a protective cover for your floor or carpet. To
ensure safety, the equipment should have at least 2 meters of free space around it.
f. Before using the equipment, check that the nuts and bolts are securely tightened. If you hear any
unusual noises coming from the equipment during use and assembly, stop immediately. Do not use the
equipment until the problem has been rectified.
g. Wear suitable clothing while using the equipment. Avoid wearing loose clothing that may get caught in
the equipment or that may restrict or prevent movement.

4
Quantum 2 Inversion Table
h. This equipment is designed for indoor and family use only
i. Care must be taken when lifting or moving the equipment so as not to injure your back.
j. Always keep this instruction manual and assembly tools at hand for reference.
k. The equipment is not suitable for therapeutic use.
2. CARE INSTRUCTIONS
a. Lubricate moving joints with grease after periods of usage
b. Be careful not to damage plastic or metal parts of the machine with heavy or sharp objects
c. The machine can be kept clean by wiping it down using dry cloth

5
Quantum 2 Inversion Table
3. EXPLODED DIAGRAM

6
Quantum 2 Inversion Table
4. PARTS LIST
NO.
Name
Qty.
NO.
Name
Image
Specification
Qty.
1
Front leg bracket
1
14
Hex screw
M8x55
6
2
Back leg bracket
1
15
Washer
Φ8.5*Φ16*1.2
20
3
Front support
bar
1
16
Hex screw
M8X20
6
4
Back support bar
1
17
Nut
M10
1
5
Back rest frame
1
18
Nut
M8
10
6
Height adjusting
pipe
1
19
Washer
Φ10.5*Φ20*1.2
1
7
Front foot lock
pipe
1
20
Cross flat head
screw
M6x16
2
8
Back foot lock
pipe
1
21
Pin with draw ring
Φ8x55
4
9
Foot Plate
1
22
Draw pin
M16x20
1
10
Left and Right
Handrail
1
23
Wrench
13#-17#
1
11
Foam
4
24
Wrench
14#-17#
1
12
Z type bracket
2
25
Allen key
5# Cross
1
13
Head rest
1

7
Quantum 2 Inversion Table
5. ASSEMBLY INSTRUCTIONS
STEP 1:
a. Use the 2x Hex Screw (14) and 2x Washer (15) to secure the Front support bar (3) onto the Front
leg bracket (1).
b. To adjust your decline angle, insert the Back support bar (4) into the Back leg bracket (2) and
secure with 1x Pin with draw ring (21).
c. Attach 2x Z type bracket (12) to part (2) and secure with 2x part (21).

8
Quantum 2 Inversion Table
STEP 2:
a. Use the 2x Flat head screw (20) to secure the Head rest (13) onto part (5).
b. Use 4x Hex screw (16), 4x Washer (15) and 4x Nut (16) to secure part (5) to part (12).

9
Quantum 2 Inversion Table
STEP 3:
a. Insert the Back foot lock pipe (8) into the Height adjusting pipe (6) and secure with 1x Hex screw
(16).
b. Attach the Foam (11) onto part (8).
c. Secure Front foot lock pipe (7) to the foot locking lever (as pictured), using 1x Washer (19) and 1x
Nut (17).

10
Quantum 2 Inversion Table
STEP 4:
a. Secure part (6) to Foot Plate (9) with 2x Hex screw (14), 4x Washer (15) and 2x Nut (18).