Lippert Thin Shade 806621 Installation instructions

1
lci1.com 574-537-8900 Rev. 06.04.21CCD-0002703
Entry Door Window
Replacement with
Thin Shade Kit
Installation and Owner’s Manual
(For Aftermarket Applications)
Window Replacement with Thin Shade KitWindow Replacement with Thin Shade Kit
Kit #Kit # DescriptionDescription
806621 Window glass (tinted), exterior frame, interior
frame, window release tools, Thin Shade
Table of Contents
Introduction ............................................ 2
Safety ................................................... 2
Resources Required ................................... 2
Parts List ................................................ 2
Remove Existing Window .............................. 3
Option A: Screw-Type Window ........................ 3
Option B: Snap-In Window ............................ 3
Install New Window .................................... 5
Install Thin Shade ...................................... 5
Notes .................................................... 7
Entry Door Window
Replacement with
Thin Shade Kit
Installation and
Owner’s Manual
(For Aftermarket Applications)

2
lci1.com 574-537-8900 Rev. 06.04.21CCD-0002703
Entry Door Window
Replacement with
Thin Shade Kit
Installation and Owner’s Manual
(For Aftermarket Applications)
Introduction
This document provides the procedures to replace the
window in LCI RV entry door with the LCI Thin Shade with
a snap-together window frame.
Additional information about this product can be obtained
from support.lci1.com or by downloading the free myLCI
app. The myLCI app is available for free on Apple App
Store®for iPhone®and iPad®and also on Google Play™for
Android™users.
App Store®and iPad®are registered trademarks of
Apple Inc.
Google Play™and Android™are trademarks of Google Inc.
Safety
Resources Required
• One or two people, depending on task
• Phillips screwdriver (for screw-type windows)
• Block of wood
• Rubber mallet
MOVING PARTS CAN PINCH, CRUSH OR CUT. KEEP
CLEAR AND USE CAUTION.
Parts List
PN 806621 Window Replacement with Thin Shade Kit
Letter Part # Description Qty
A711862 Outer window frame, 15” x 24” 1
B706073 Glass; dark tint - G20; 13 1/4” X
22 1/4” tempered 1
C786036 Inner window frame, 15” x 24” 1
D786037 Thin Shade, 11 7/8” x 21 1/2” 1
E429436 Kit of window release tools 16
FAILURE TO FOLLOW THE INSTRUCTIONS
PROVIDED IN THIS MANUAL MAY RESULT IN DEATH,
SERIOUS INJURY, UNIT DAMAGE OR VOIDING OF
THE COMPONENT WARRANTY.
A
C
D
E
B
NOTE: Part numbers are shown for identification purposes
only. Not all parts are available for individual sale. All parts
with a link to the Lippert Store can be purchased.
Read and understand instructions before servicing, installing
and/or operating this product. Adhere to all safety labels.
This manual provides general instructions. Many variables
can change the circumstances of the instructions, i.e., the
degree of difficulty, operation and ability of the individual
performing the instructions. This manual cannot begin to
plot out instructions for every possibility, but provides the
general instructions, as necessary, for effectively interfacing
with the device, product or system. Failure to correctly
follow the provided instructions may result in death, serious
personal injury, severe product and/or property damage,
including voiding of the LCI limited warranty.

3
lci1.com 574-537-8900 Rev. 06.04.21CCD-0002703
Entry Door Window
Replacement with
Thin Shade Kit
Installation and Owner’s Manual
(For Aftermarket Applications)
Remove Existing Window
Option A: Screw-Type Window
1. Remove the 16 Phillips head screws from the interior
window frame (Fig.1A).
Fig.1
Option B: Snap-In Window
1. Slide the 16 release tools (Fig.2A) into the 16 slots (Fig.3)
around the outside perimeter of the interior window frame.
slots
Fig.2
Fig.3
A A A
A
A
A
A
A
A
A
A
A
A
A
A
A
interior frame
A A A
A
A
A
A
A
A
A A
A
A
A
A
A
interior frame
2. Support the window glass on the interior side to
prevent the glass from falling inward, causing it to pull
away from the interior frame.
NOTE: A second person is recommended to assist during
the removal of the interior frame.
3. Remove exterior frame and glass.

4
lci1.com 574-537-8900 Rev. 06.04.21CCD-0002703
Entry Door Window
Replacement with
Thin Shade Kit
Installation and Owner’s Manual
(For Aftermarket Applications)
NOTE: There are grooves on the bottom of the release
tools that fit into the ribs of the frame, allowing the tool to
open the frame’s catch feature (Fig.4).
Fig.4
groove on release tool
interior frame
exterior
frame
2. Support the window glass on the interior side to
prevent the glass from falling inward, causing it to pull
away the interior frame.
NOTE: A second person is recommended to assist during
the removal of the interior and exterior frame.
3. Remove exterior frame and glass.
4. Remove release tools from interior frame.

5
lci1.com 574-537-8900 Rev. 06.04.21CCD-0002703
Entry Door Window
Replacement with
Thin Shade Kit
Installation and Owner’s Manual
(For Aftermarket Applications)
Install New Window
1. Place the new outer frame with glass against the exterior
of the door (Fig.5).
interior
window
frame
with catch
feature
exterior
window
frame with
protrusions;
glass
installed
Fig.5
Install Thin Shade
1. Unlatch the small levers at the top of the window frame
in a left-to-right direction (Fig.6).
levers
levers
Fig.6
2. Unlatch the levers at the bottom of the frame in a
right-to-left direction (Fig.6).
NOTE: Make sure the frame’s seal is positioned properly
against the door.
NOTE: The next step will require another person to assist
while preparing to install the interior frame.
2. While one person holds the exterior frame and glass
against the door, the other person snaps the interior frame
into the exterior frame. Make sure all 16 locking points click
into place.
3. Hold a wood block on one side of the frame and tap
the other side with a rubber mallet. The gap between the
frame and door will close when the seal is completely
compressed and the exterior frame touches the door.
4. Continue tapping the frame around its perimeter until all
16 points are fully locked.

6
lci1.com 574-537-8900 Rev. 06.04.21CCD-0002703
Entry Door Window
Replacement with
Thin Shade Kit
Installation and Owner’s Manual
(For Aftermarket Applications)
Fig.7
3. Holding the top rail of the Thin Shade at an approximate
45-degree angle, insert one end of the rail into the corner
between the inner frame and glass (Fig.7A).
NOTE: Shade portion not shown for clarity.
4. Repeat this action on the opposite end of the top rail.
5. Press both ends of the rail up and latch in-place, moving
the top levers (Fig.6) in a right-to-left direction.
6. Holding the bottom rail at an approximate 45-degree
angle, insert one end into the corner between the inner and
outer frame (Fig.7B).
7. Repeat this action on the opposite end of the bottom rail.
8. Press both ends of the rail down and latch in-place,
moving the bottom levers in a left-to-right direction.
A
B

7
lci1.com 574-537-8900 Rev. 06.04.21CCD-0002703
Entry Door Window
Replacement with
Thin Shade Kit
Installation and Owner’s Manual
(For Aftermarket Applications)
Notes

8
lci1.com 574-537-8900 Rev. 06.04.21CCD-0002703
Entry Door Window
Replacement with
Thin Shade Kit
Installation and Owner’s Manual
(For Aftermarket Applications)
Manual information may be distributed as a complete
document only, unless Lippert Components provides
explicit consent to distribute individual parts.
All manual information is subject to change without
notice. Revised editions will be available for free
download at lci1.com. Manual information is considered
factual until made obsolete by a revised version.
Please recycle all obsolete materials and contact
Lippert Components with concerns or questions.