LRS Freedom TX-7471 User manual

For Cell Phone Messaging:
5
2 3 4
1
6
Items Included:
Setup Guide
Freedom (TX-7471)

FREEDOM TRANSMITTER (TX-7471)
BASIC OPERATIONS GUIDE
PAGING
GUEST PAGERS: Return guest pagers to charging unit after paging
Non-Alphanumeric (Adverteaser, Coaster Call pagers)
1. Main screen displays –
2. Enter pager number assigned to guest at handout
3. Press to send page
Alphanumeric (Alpha Coaster pager)
1. Main screen displays – Guest #:
2. Enter pager number assigned to guest at handout
3. Enter code (000-099) (see Preset Messages Table)
4. Press to send page
(You may also Press (V1), (V2) or (V3) to send
the message with 1, 2 or 3 vibrations or (Exit) to Cancel
the page)
STAFF PAGERS
Non-Alphanumeric (Star Pager)
1. On keypad press (Display =)
2. Enter staff pager number to be paged
3. Press to send page
Alphanumeric (Rechargeable or Battery Operated Alphanumer-
ic pagers)
1. On keypad press (Display = )
2. Enter staff pager number to be paged
3. Enter message code (000-099) (see Preset Messages
Table)
4. Press to send page
(You may also Press (V1), (V2) or (V3) to send
the message with 1, 2 or 3 vibrations or (Exit) to Cancel
the page)
ALL STAFF PAGE: Page all alphanumeric staff pagers simultaneously
1. Press
2. Press 9-1-1 then
3. Enter message number code (000-099)
4. Choose (V1), (V2) or (V3) for 1, 2 or 3 vibra-
tions
CONNECTING TO AN ETHERNET NETWORK
1. Press
2. Enter Password (Default: 5-6-7-8-9)
3. Press Other
4. Press (Down)
5. Press Network
6. Press Enabled
7. Press (Yes)
8. Connect Network Cable
TURN ON CELL PHONE PAGING
1. Press
2. Enter Password (Default: 5-6-7-8-9)
3. Press System
4. Press Cell Paging
5. Press Enabled
6. Press (Yes)
PRESET MESSAGES
USING MESSAGE CODES
When prompted for a message:
1. Enter message number code (and a numeric extension –
optional)
2. Press
Example: Send a message to call extension 123
From the Preset Message Table to the right, choose – 006 (Call
Ext)
Enter code 0-0-6-1-2-3 (Displays: CALL EXT 123)
CREATE ADDITIONAL ALPHA MESSAGES: For Alpha pagers only
1. Press
2. Enter Password (Default: 5-6-7-8-9)
3. Press Other
5. Press (Canned Msgs.)
6. Press (EDIT)
7. Press (NEW) to write a new message (Press
(EDIT) to edit displayed message)
8. Enter message using alphanumeric typing (i.e. for letter
press #2 twice)
 9.Presstosavethen(EXIT)whennished
MISC. FUNCTIONS
ANTI-THEFT MODE: (Signal pagers that are out of range)
1. Press
2. Enter Password (Default: 5-6-7-8-9)
3. Press System
2. Press Anti-Theft
3. Press (ON) to activate anti-theft mode or (press
to turn OFF)
4. Main screen display will show on upper left corner
when turned on
Set Time/Date:
1. Press
2. Enter Password (Default: 5-6-7-8-9)
3. Press System
4. Press Date/Time
5. Press for Date Format, Press for Time Format,
Press to Set Date, or Press (DN-Down) then Press
to Set Time
CELL PHONE PAGING
Entering a Cell Phone Number:
  1.Whenacustomerrstchecksin,press
2. Enter the customer’s cell phone number and press
(Note: The cell phone number entered must include the area
code)
3. The transmitter will display a pager number for that cell
phone number
4. Write that pager number down for future reference
5. Press to complete the cell phone entry process
Paging a Cell Phone:
1. Main screen displays –
2. Key in the pager number written down earlier for the cell
phone you wish to page
3. Press to page
WAIT REDUCER
Connecting to an Ethernet Network:
1. Turn on Network
2. Press
3. Enter Password (Default: 5-6-7-8-9)
4. Press System
5. Press (Down)
6. Press Wait Reducer
7. Press (Yes)
800-437-4996 | 214-553-5308
www.lrsus.com
XU-0160 REV. A 022520
000 Phone Call
001 Sales Call
002 Manager
003 Customer
004 Room
005 Visitor
006 Call Ext
007 MTG Room
008 Lane
009 Aisle
010 Void
011 Stamps
012 Change
013 Station
014 Machine
015 Operator
016 Emergency
017 XX Minutes
018 Tee
019 Pro Shop
020 Starter
021 Service drive
022 Showroom
023 Parked Call
024 Voice Mail
025 Dressing
room
026 Price check
027 Department
028 Cashier
029 Ofce
030 Table
031 Winner
032 Pickup
033 Dock
034 You have mail
035 Table ready
036 No special
037 Hole
038 Kitchen
039 Bar
040 Door
041 Survey
042 T-nnn Q-mm
043 Break
044 Fire
045 Unit
046 Window
047 Nurse
048 Register
049 Owner
050 Check
051 Drink
052 Food
053 Service
054 Seat
055 Booth
056 Lobby
057 Help
058 Restroom
059 Valet
060 Car
061 Bus
062 Bay
063 Low battery
064 Error
065 Exit
066 Fax
067 Host
068 Space
069 Location
070 Nursery
071 Teller
072 Ofcer
073 Buffet
074 Diaper
change
075 Child crying
076 To nursery
PRESET MESSAGE CODES
Code Message
REPEATER
Place the Repeater just inside the outer edge of the signal area you
are trying to extend.
To Turn On:
1. Press
2. Enter Password (Default: 5-6-7-8-9)
3. Press System
4. Presss (DN-Down)
5. Press Repeat Pages
6. Presss (Yes) to turn on
For advanced features, go to support.lrsus.com to download a complete user
manual. For technical support call Long Range Systems at 800-437-4996.
For warranty information, visit lrsus.com/warranties
FCC STATEMENT
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may
cause undesired operation.
2.Changesormodicationsnotexpresslyapprovedbythepartyresponsibleforcompliancecould
void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be deter-
mined by turning the equipment off and on, the user is encouraged to try to correct the interfer-
ence by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
“RF Exposure Guidance
In order to comply with FCC / ISED RF Exposure requirements, this device must be installed to
provide at least 20 cm separation from the human body at all times.
An de se conformer aux exigences d’exposition RF FCC / ISED, cet appareil doit être installé pour
fournir au moins 20 cm de séparation du corps humain en tout temps.”