Lucent Technologies MERLIN Plus Release 2 User manual

Lucent Technologies
Bell Labs Innovations
MERLIN
®
Plu S
COMMUNICATIONS SYSTEM
Release 2
Customization Chart
999-503-148
Issue 3
November 1989

How to Use This
CUSTOMIZATION
CHART
Follow this chart to perform all of your
administration procedures. More
detailed instructions are included in
Section 5, "Reference," of the MERLIN®
Plus System Manual. If you have any
problems or questions, please call the
AT&T National Service Assistance
Center: 1-800-628-2888.
© 1989 AT&T
All Rights Reserved
Printed in USA
MERLIN is a registered trademark of Lucent Technologies.
Issue 3
November 1989

SYSTEM RESET
DIAL *99198
TURN power off, wait 10 seconds
TURN power on
BASIC ADMINISTRATION
NUMBER OF OUTSIDE LINES
DIAL *4
DIAL one digit for the number of lines (l-8)
TOUCH Administer
DIAL SIGNALS
DIAL
*38 Touch-Tone (F†)
*39 Rotary
TOUCH Administer
LONG DISTANCE DIALING
DIAL
*36 Toll prefix (0 or 1) needed (F)
*37 Area code only needed
TOUCH Administer
TRANSFER RETURN INTERVAL
DIAL *2
DIAL one digit for the number of rings before a
transferred call returns to the attendant (0–9)
(F=4 rings)
TOUCH Administer
HOLD DISCONNECT INTERVAL
DIAL *69
TOUCH line button
Green light on = long (450 msec) interval (F)
Green light off = short (50 msec) interval
TOUCH Administer
GROUP PAGING
DIAL *71 Group 1 (voice terminals 10-19)(F)
*72 Group 2 (voice terminals 20-29) (F)
TOUCH Auto Intercom button (or dial appropriate
code from dial code chart)
Green light on = telephone assigned
Green light off = telephone removed
(or TOUCH Drop to remove all telephones from a
paging group)
TOUCH Administer
JACK ASSIGNMENT
BUSY BUSTER
Dial *35
TOUCH Auto Intercom button (or dial
Intercom number) of jack (F=jack 19)
Green Iight on = jack assigned
Green light off = jack not assigned
AUTOMATIC SYSTEM ACCESS
DIAL *59
TOUCH Auto Intercom button (or dial
intercom number) of jack (F=Jack 18)
Green light on = jack assigned
Green light off = jack not assigned
TOUCH Administer
CALL REPORT AND SYSTEM FEATURE REPORT
DIAL *82 Reports (SMDR)
*85 System Feature Report
TOUCH Auto Intercom button (or dial
intercom number) of jack (F=jack 19)
Green light on = jack assigned
Green light off = jack not assigned
TOUCH Administer
LINE ADMINISTRATION
ASSIGN LINES TO A VOICE TERMINAL
TOUCH Auto Intercom button (or dial intercom
number)
TOUCH line buttons
Green light on = line assigned
Green light off = line not assigned
TOUCH Administer
BUTTON - FREE LINE OPERATION
TOUCH Auto Intercom button (or dial intercom
number)
TOUCH line buttons
Green light on = line assigned
Green light off = line not assigned
(or DIAL *34 to assign all Iines)
DIAL *31 Incoming calls ring
*32 Incoming calls don’t ring
TOUCH Administer
†F=Factory setting.

AT VOICE TERMINAL 10
TO ENTER ADMINISTRATION MODE: SLIDE the T/P switch to P
Touch Administer
TO LEAVE ADMINISTRATION MODE: SLIDE the T/P switch to center position
AUTOMATIC SYSTEM
ACCESS (ASA) FEATURES
ASSIGN ASA LINE GROUPS
*51 Call Forwarding incoming line group
*52 Call Forwarding outgoing line group
DIAL *54 Remote Line Access Incoming
Iine group
*58 Direct Extension Dialing incoming
line group
*75 System Answer incoming line group
TOUCH line buttons
Green light on = line assigned
Green light off = line not assigned
TOUCH Administer
ASSIGN ASA RING INTERVALS
DIAL *76
1 Direct Extension Dialing
DIAL 2 Call Forwarding
3 Remote Line Access
4 System Answer
DIAL one digit for number of rings before
answering call (0-9) (F=2 rings)
TOUCH Administer
MODIFY ASA VOICE MESSAGE
DIAL *50
TOUCH line button
DIAL telephone number to include in message
TOUCH Administer
REPEAT above procedure for each Iine
ACTIVATE CALL FORWARDING/
DIRECT EXTENSION DIALING VOICE MESSAGES
DIAL *30
0 Voice message off
1 Voice message on (F)
TOUCH Administer
ASSIGN CALL FORWARDING DESTINATION
NUMBER
DIAL *53
DIAL Call Forwarding destination telephone
number
TOUCH Administer
ASSIGN SYSTEM ANSWER ALTERNATE
ATTENDANT
DIAL *79
TOUCH Auto Intercom button (or dial intercom
number)
TOUCH Administer
DIAL
Telephone number
Account number
SELECT SYSTEM ANSWER VOICE MESSAGE
DIAL *77
DIAL 0 No voice message
1 “Please Hold”
2 “Please hold, your call will be handled
momentarily” (F)
CREATE REMOTE LINE ACCESS PASSWORDS
DIAL *56
DIAL an intercom number
DIAL three digits (except 000)
To remove a password:
DIAL the intercom number
DIAL 000
TOUCH Administer
SYSTEMWIDE OPTIONS
DISALLOWED LIST ENTRIES
DIAL *09
TOUCH two-digit item number (01-20)
To add entry
DIAL the disallowed number (up to 16 digits)
TOUCH Administer
To remove an entry:
TOUCH Administer
ALLOWED LIST ENTRIES
DIAL three-digit Iist code (*01-*08)
DIAL two-digit item number (01-10)
To add an entry:
DIAL the allowed number (up to eight digits)
TOUCH Administer
To remove an entry:
TOUCH Drop
TOUCH Administer
ASSIGN CALL RESTRICTIONS
TOUCH Auto Intercom button (or dial intercom
number)
TOUCH Restrict until:
Green light on steady = Unrestricted (all calls)
Green light flashing = Toll Restricted (no long
distance calls)
Green light off = Outward Restricted (no out-
side calls)
TOUCH Administer
ASSIGN ALLOWED/DISALLOWED LISTS
DIAL three-digit list code:
*01–*08 Allowed Iist codes
*09 Disallowed Iist code
DIAL 00
TOUCH Auto Intercom button (or dial appropriate
code from dial code chart)
Green light on = list assigned
Green light off = list not assigned
(or TOUCH Conference to assign the list to all
the voice terminals, TOUCH Drop to remove the
list from all the voice terminals)
TOUCH Administer
SYSTEM SPEED DIAL
DIAL code (#60—#89 or #900—#999)
*88 Account code assignment
DIAL *92 Restriction override assignment
*90 No restriction override assignment
DIAL * to make the number private
TOUCH Administer
MUSIC VOLUME AND
LOUDSPEAKER PAGING
MUSIC-ON-HOLD VOLUME
*12 Off
DIAL *13 Low
*14 Medium (F)
*15 High
TOUCH Administer
BACKGROUND MUSIC VOLUME
*16 Off
DIAL *17 Low
*18 Medium (F)
*19 High
TOUCH Administer
CENTRAL OFFICE LINE PAGING ASSIGNMENT
DIAL *91
TOUCH the line buttons
Green light on = line assigned
Green light off = line not assigned (F)
TOUCH Administer
Touch Administer

REPORT OPTIONS VOICE TERMINAL OPTIONS
CALL REPORT - TYPE OF CALLS REPORTED
DIAL *84
DIAL 0 No calls (F)
1 Outgoing calls only
2 All calls
TOUCH Administer
CALL REPORT - MINIMUM CALL DURATION
DIAL *83
DIAL one digit for the minumum number of minutes
(0-9) (F=1 minute)
TOUCH Administer
SYSTEM FEATURE REPORT & CALL REPORT
(SMDR) - DATE/TIME
DATE
DIAL *80
DIAL two digits for the month (01-12)
DIAL two digits for the day (01-31)
DIAL two digits for the year (00-99)
TOUCH Administer
TIME
DIAL *81
DIAL two digits for the hour (00-23)
DIAL two digits for the minutes (00-59)
TOUCH Administer
SYSTEM FEATURE REPORT - PRINTOUT
*60 System administration report and
individual telephone reports
*61 System administration report only
DIAL *62 Individual telephone reports
TOUCH one or more Auto Intercom
buttons (or dial intercom numbers)
*63 Abort printout and cancel all other
report requests
TOUCH Administer
CENTRALIZED PROGRAMMING
TOUCH Auto Intercom button (or dial Intercom
number)
TOUCH Conference
PROGRAM telephone
TOUCH Conference
VOICE TERMINAL TEMPLATES
DIAL *10
1 clear template
2 dialer template
DIAL 3 feature template
4 receptionist/secretary template
TOUCH Auto Intercom button (or dial intercom
number)
TOUCH Administer
COPY
TOUCH Auto Intercom button (or dial intercom
number)
TOUCH Copy
TOUCH Auto Intercom button (or dial intercom
number) of the source phone
TOUCH Administer
PROGRAM MODE LOCK
DIAL *89
Auto Intercom button (or dial the
appropriate code from the dial code
chart)
TOUCH Green light on = phone locked
Green light off = phone not locked (F)
Conference - All phones locked
Drop - No phones locked
TOUCH Administer

DIAL CODE
CHART
INTERCOM DIAL INTERCOM DIAL
NUMBER CODE NUMBER CODE
10
#22 20 #03
11
#21
21 #04
12 #20
22
#05
13
#19
23 #06
14
#18
24
#07
15 #17
25 #08
16 #16
26 #09
17 #15 27 #10
18
#14 28
#11
19
#13
29
#12
If you do not have an Auto Intercom button for all of
the voice terminals in your system, use this dial code
chart when instructed to do so in these administration
procedures.