Lumineux Belmont User manual

Zhaga sensor
READ THESE INSTRUCTIONS
THOROUGHLY BEFORE
INSTALLATION KEEP THESE
INSTRUCTIONS FOR
FUTURE REFERENCE.
IMPORTANT:
This product must be installed
by a qualifi ed electrician or
competent person, and in
accordance with current building
and IET wiring regulations.
• Light Fitting
• Instruction Manual
• Suspension Kit
Belmont
Linear High Bay
Plug & Play (Zhaga)
120W, 180W and 200W
Technical Helpline: [phone]
www.lumineux.co.uk
TOOLS REQUIRED
BOX CONTENTS
• Cable
This lighting  xture has been properly
packed to avoid damage during
transit. Before commencing with the
installation carefully inspect the
luminaire to con rm there is no
damage. DO NOT INSTALL if any
damage has occurred to the  xture
or any of its components:
• Turn off the mains power before performing
inspections, installation, or removal
• Verify that the supply voltage is correct by
comparing it with the luminaire label information
• It is the installers responsibility to ensure installation
is suitable for the total load of the luminaire(s). The
supply cable, fuses/circuit brakers must be correctly
rated for the electrical load and considering for any
transient inrush currents that may occur
• Do not perform insulation strength or resistance
tests on installed luminarie(s) connected
PLEASE READ THESE INSTRUCTIONS
BEFORE INSTALLATION.
WARNING: Risk of electric shock! Isolate
the mains power before proceeding.
INSTALLATION INSTRUCTIONS
IP65
Warranty
5 YR
Hours
50,000
IK10
1. Disconnect mains supply.
2. Hang the light using supplied suspension
cord. Recommend suitable carabiner clips
for ease. (See weights overleaf)
3. To add sensor, twist off blanking cap on the
Belmont. Attach and twist in Zhaga sensor of
your choice. Follow remote control instructions
to set up sensor
4. Connect mains cable and reconnect mains
supply when deemed safe. (4)
Note: sensors can only be adjusted when
power is on
Manby Business Park, Manby, Lincolnshire, LN11 8UT
Lumineux is a B&T Associates Ltd company.
1
3 4
2
on
off
INSTALLATION INSTRUCTIONS
on
off
Electrical connection wiring
LIVE (SW) = Brown
NEUTRAL = Blue
EARTH = Green/Yellow
Belmont
Linear High Bay
DD
A
G
Enabled
Flicker
Free

ROUTINE TEST RECORD
Type Test Year 1 Year 2 Year 3 Year 4 Year 5
Signed Date Signed Date Signed Date Signed Date Signed Date
Functional 1
Functional 2
Functional 3
Functional 4
Functional 5
Functional 6
Functional 7
Functional 8
Functional 9
Functional 10
Functional 11
3hr Duration 12
Installation Engineers Contact Details: Luminaire Reference / Location
Name: Tel:
Luminaire Details: Full Recharge Duration 24 Hours Emergency Duration 3 Hours Lamp Type LED
Belmont Linear High Bay Plug & Play (Zhaga)
The light source of this unit is not
replaceable; when the light source
reaches its end of life the whole
luminaire shall be replaced.
Disassembly instructions for end of
life disposal available on website.
Disposal of Electronic Equipment
WEEE Directive 2002/96/EC This
product falls within the scope of
the Waste Electrical & Electronic
Equipment Directive (WEEE), which
means the product should not be
disposed of as normal household
waste. Please recycle where
facilities exist or check with your
Local Authority. RoHS – All
components and materials used in
this product are RoHS 2002/95/EC
compliant.
Specications may change from time
to time. The information contained
in this leaet is for guidance only
and should not be considered as
always accurate and should be
treated as not representative.
Standard -30º to +50ºC
Emergency 0 to +30ºC
DISPOSAL
WARRANTY
PRODUCT TEMP SPECIFICATION
Part No. Description Watts L(mm) W(mm) H(mm) Weight
430241-60 Belmont Linear High Bay
60º Optic - Grey 120W 340 325 60 3.5Kg
430242-60 Belmont Linear High Bay
60º Optic - Grey 180W 680 325 60 6.7Kg
430241-80 Belmont Linear High Bay
25º x 80º Optic - Grey 120W 340 325 60 3.5Kg
430242-80 Belmont Linear High Bay
25º x 80º Optic - Grey 180W 680 325 60 6.7Kg
430241-85 Belmont Linear High Bay
85º Optic - Grey 120W 340 325 60 3.5Kg
430242-85 Belmont Linear High Bay
85º Optic - Grey 180W 680 325 60 6.7Kg
BELMONT DIMENSIONS
Revision 2 - SEPTEMBER 2022
L (mm)
H (mm)
W (mm)
This luminaire is warranted for a
period of 5 years from the date of
purchase.** The backup battery
pack in the emergency version
is warranted for a period of 24
months. The warranty could be
invalidated should the light tting
not be installed according to these
instructions, outside the scope of
the specication or the product
has been altered or tampered with
in any way. Please see website for
terms and conditions.
** Please see our website for more detailed information on warranty. Technical Helpline: [phone]
For emergency wiring, please refer to the
emergency pack instruction manual.
This product contains a light source of energy efciency Class D.