M-Elec VALO ML-2836SDIM-US User manual

ML-2836DIM-US is an RF controller for single color lighting. Each white can achieve 256 levels of
brightness adjustment.
ML-2836SDIM-US
Product information
Colour control DIMMING
Operation voltage 3 VDC
Operation Frequency 434MHz/868MHz
Dimensions 75x120x41mm
Remarks 
Warranty 
TECHNICAL INFORMATION 
T. 1300 222 445 | www.melec.com.au melec.com.au/legal/warranties
PART No. 
Colour control , DIMMING
Input voltage 12-24VDC
Output current 5x4A
Output Power 
Output type 12-24V constant voltage output
Operating temperature °°C
Dimensions 145x46.5x16mm
Warranty 
Receiver (purchased separately)
3

T. 1300 222 445 | www.melec.com.au melec.com.au/legal/warranties
BUTTON GUIDE
WIRING DIAGRAM (ML-VLC-C5)
RF single color wireless controller
Feature
ML-2836DIM-US
Parameter
Installation
Remote
Part No. Operation Voltage Operation
Frequency
ML-2836DIM-US 3VDC 434MHz/868MHz
Remarks
RF Wireless
Wiring diagram
ML-2836DIM-US is an RF controller for single color lighting. Each white can achieve 256 levels of
brightness adjustment.
Part No. Iuput Voltage Remarks
Current
ML-1009FAWi 12-36VDC Constant voltage
4x(60-180)W
4x5A
Output
Receiver(purchased separately)
Operation
a.Learning
Press shortly the learning Key on the receiver, then push the rotary button .Once successfully learn, the LED
lights will blink on the receiver. Do the same for the other receivers if you use them, you can add as many
optional receivers as you want
b.Operation
-Short push rotary button to switch ON/OFF
-Adjust dim brightness by the rotary button from left to right 1-100%
-Adjust dim brightness by the rotary button from right to left 100-1%
Battery
Power Supply
12-36VDC
LN
110V-230VAC
Single color LED Strip
Single color LED Strip
Single color LED Strip
Single color LED Strip
Battery life span:2 years,battery type:CR2032
ML-1009FAWi
Made in China
PRI:
Uin=12- 36VDC
Iin=20.5A
SEC:
Uout=4x (12-36)V DC
Iout=4x 5A
Pout=4x(60-180)W
TEMP RANGE:-20℃-+50℃
12-36VDC
W
Safety & Warnings
1) The product shall be installed and serviced by a qualified person.
2) IP20. Please avoid the sun and rain. When installed outdoors, please ensure it is mounted in a water proof
enclosure.
3) Always be sure to mount this unit in an area with proper ventilation to avoid overheating.
4) Please check if the output voltage of any LED power supplies used complies with the working voltage of the
product.
5) Never connect any cables while power is on and always assure correct connections to avoid short circuits
before switching on.
6) Please ensure that the cable is secured tightly to the connector.
7) For latest information please visit our website www.melec.com.au.
Warranty Agreement
1) We provide lifelong technical assistance with this product:
5 year warranty. Every product has printed date on, for example: 1125 means year 2011, week 25.The warranty
is for free repair or replacement and covers manufacturing faults only. For faults beyond the 5-year warranty we
reserve the right to charge for time and parts.
2) Warranty is void if:
Any defects are caused by wrong operation.
Any damages are caused by unauthorized removal, maintenance, modifying, incorrect connection and
replacement of components.
Any damages are due to transportation, vibration etc. after purchase.
Any damages are caused by earthquake, fire, lightning, pollution and abnormal voltage.
Any damages are caused by negligence, inappropriate storing at high temperatures and humidity or near
harmful chemicals.
Product has been updated or changed.
3) Repair or replacement as provided under this warranty is the exclusive remedy to the customer.
5
OPERATION
1. Learning (matching)
A: Connect the ML-VLC-C5 according to the wiring diagram.
B: Short press “Prog.” key on the ML-VLC-C5 3 times (or reset power 3 times) to set it to RF
pairing mode.
C:Power on the ML-2836DIM-US by pressing the rotary button.
E: LED lights connected to the ML-VLC-C5 will blink once to indicate successful pairing.
2. Operation
A: Short push rotary button to switch ON/OFF.
B: To increase brightness,adjust dim brightness by rotating the rotary button clockwise 1-100%.
C: To decrease brightness Adjust dim brightness by rotating the rotary button counter-clockwise
100-1%
3.Delete pairing to RF Receiver
A: Press and hold the “Prog.” button for over 3 seconds until the connected LED lights blink, this
means the pairing is deleted successfully.

T. 1300 222 445 | www.melec.com.au melec.com.au/legal/warranties
WARRANTY
PLEASE NOTE

• 
• Disconnect power before installing or servicing
• This fitting is for indoor use and should not be used in areas with limited ventilation or high ambient temperatures
• 
• 
• 000)
• 
• 
corrosive agents such as moisture, condensation and other harmful elements
