MASSEY FERGUSON BETA 7360 User manual

7360 from serial no. 553900001
7360 PL from serial no. 554000013
7370 from serial no. 564000001
7370 PL from serial no. 564100007
ORIGINAL
OPERATOR'S MANUAL

TABLE OF CONTENTS
1. General Information
2. Operation
3. Controls and Instruments
4. Field Operations
5. Lubrication and Maintenance
6. Adjustments
7. Systems
8. Troubleshooting
9. Off-Season Storage
10. Optional Equipment
11. Technical Specifications
12. Alphabetical Index
Find manuals at http://best-manuals.com/search?&s=MF-LA327316011

CONTENTS
Section-page
1
1. GENERAL INFORMATION
Customer information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
Appropriate use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3
Combine identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4
Ecology: information for the prevention of environmental pollution . . . . . . . . . . . . . . . . . . . . . . . . 1-9
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-10
Emergency exit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-32
Safety devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-33
Towing the combine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-41
Fire resistance inside the cab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-41
Noise level in the cab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-42
Ambient noise in motion Directive 2009/63/EC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-42
Vibrations in the cab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-42
Statutory regulations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-43
Hydraulic systems: hoses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-43
Scrapping and disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-44
Electromagnetic emissions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-44
Notes for road transport . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-45
Weight distribution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-47
2. OPERATION
Crop processing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
3. CONTROLS AND INSTRUMENTS
Steering column . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
Control Pedals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-2
Multifunction lever . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3
Gearshift lever and reversing lever . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5
Control panel ( 7360 e 7370 models) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6
Control panel (7360 PL and 7370 PL models) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7
Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-13
Cab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-35
Access to combine components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-45
Starting the engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-48
Stopping the engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-49
Operations to be carried out before road transport . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-50
Before using the combine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-52
4. FIELD OPERATIONS
General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-1
Starting and Stopping the Combine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2
Cutting table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4
Main Crop Elevator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-9
Cylinder Housing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-13
Concave . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-14
Rear beater . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-19
Multi Crop Separator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-20
Straw walkers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-23
Main Grain Pan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-24
Fanning mill . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-27
Top sieve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-28
Bottom sieve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-29
Returns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-30
Grain tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-31
Find manuals at http://best-manuals.com/search?&s=MF-LA327316011

CONTENTS
Section-page
2
5. LUBRICATION AND MAINTENANCE
General information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1
Preliminary Service Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2
Scheduled Service Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3
Where and When to Carry Out Service Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4
Periodical maintenance operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-37
Capacities and specifications 7360 and 7360 PL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-40
Capacities and specifications 7370 and 7370 PL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-41
Service Schedule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-42
6. ADJUSTMENTS
Belt and chain adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1
Belts and chains (left-hand side) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2
Belts and chains (right-hand side) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-11
Reverse drive system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-17
Slip clutches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-19
Unloading tube . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-20
Tyres . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-21
Brakes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-25
Rear axle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-26
Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-30
7. SYSTEMS
Engine supply system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2
Engine air intake and exhaust system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-5
Engine cooling system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-6
Engine lubrication system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-8
SCR System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-9
Hydraulics system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-11
Hydrostatic transmission system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-20
Electrical system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-22
8. TROUBLESHOOTING
Feeding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-1
Threshing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1
Separation and cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-3
Hydrostatic Transmission . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-5
Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-6
Hydraulics system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-13
Levelling Hydraulics System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-13
Electrical System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-14
Air conditioning circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-14
Straw Chopper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-18
9. OFF-SEASON STORAGE
10. OPTIONAL EQUIPMENT
11. TECHNICAL SPECIFICATIONS
Wheels and tyres . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-1
Combine dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-4
Clearance between unloading auger and table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-10
Technical specifications - 7360and 7370 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-11
Technical specifications - 7360 PL and 7370 PL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-18
12. ALPHABETICAL INDEX
Find manuals at http://best-manuals.com/search?&s=MF-LA327316011

Operator's Manual Combines MF 7360-7370 BETA - EN - LA327316011 - 09/2011 1-1
1. GENERAL INFORMATION
1.1 CUSTOMER INFORMATION
INTRODUCTION
Your new self-propelled combine is manufactured
for harvesting seed and cereal crops, for threshing,
separating, cleaning and conveying the grain into
the tank and depositing the straw on the ground.
This Operator's Manual should be used as a
practical reference guide: It contains all the
necessary practical information for the operation,
adjustment and maintenance of your new machine.
Your combine was designed and built to ensure
optimum performance, comfort and
ease-of-operation in a wide variety of crops and
conditions.
The combine has been thoroughly inspected prior
to delivery both at the factory and by your Dealer,
to ensure you receive it in perfect condition.
To keep the combine in perfect condition and to
ensure trouble-free performance, the periodical
maintenance operations listed in this manual
should be carried out at the recommended
intervals.
Before operating and/or driving the combine,
read this Operator's Manual carefully, paying
particular attention to the section on safety
rules.
Always keep this manual on hand for further
reference.
The terms "left" and "right" are always used with
reference to the machine travelling direction.
Should you require further information about the
machine, please do not hesitate to contact your
authorised Dealer.
Your Dealer provides specially trained personnel,
genuine quality spare parts and the required tools
to solve any problems that may arise.
NOTE:
• This combine has been designed and built in
compliance with the Machine Directive
2006/42/EC. 
An EC Declaration of Conformity is supplied
with the machine (see facsimile on page 1-8). 
The manufacturer disclaims all liability to any
claim resulting from unauthorised modification
or alteration.
• This manual is published for worldwide
distribution, and the availability of equipment
shown as standard or optional varies
according to the territory in which the combine
is to be used. 
Specifications may differ from those contained
in this Operator's Manual according to the
customer's requirements.
• In order to provide a better view of features or
adjustments, certain illustrations in this manual
may show an assembly with standard guards,
or the guards required by law in different
countries, open or removed. However, a
machine should never be operated in this
condition. For your own safety, always
ensure all safety guards are closed and
correctly fitted before operating the
machine.
• This Operator's Manual, along with the
Operator's Manuals for the table and PTO
shaft, must always be kept in the pocket
provided on the right-hand side of the operator
seat for convenient reference.
Modifications and improvements
In accordance with the Company's policy of
continuous improvements to its products, the
Company reserves the right to modify and improve
its products whenever necessary and to the
required extent, without any obligation to apply
such modifications to previously sold products.
Find manuals at http://best-manuals.com/search?&s=MF-LA327316011

GENERAL INFORMATION
1-2 Operator's Manual Combines MF 7360-7370 BETA - EN - LA327316011 - 09/2011
OPTIONAL EQUIPMENT
Your machine was designed to operate in a wide
variety of crops and conditions. However, in certain
cases it may be necessary to fit additional
accessories to improve machine performance or
adapt the machine to harvesting special crops. A
list of available accessories is provided in the
section "Optional Equipment".
SPARE PARTS AND ACCESSORIES
The genuine spare parts and accessories have
been specifically designed for this type of machine.
Only genuine parts supplied by your authorised
Dealer can guarantee correct operation and
optimum performance.
Never use non-genuine spare parts or accessories:
Some accessories (e.g. PTO shafts, straw
choppers, tables) require an EC certification, which
can be provided only by the manufacturer or his
qualified and recognised sub-suppliers.
Non-genuine spare parts have not been tested and
are not authorised by the manufacturer. The fitting
and/or use of such equipment may have a
damaging effect on the design features of the
machine and jeopardise operational safety.
The manufacturer disclaims all liability in the
event of loss or damage arising as a result of
non-genuine parts, accessories or equipment
being used.
It is expressly prohibited to make any modification
to the combine without the prior written
authorisation by the manufacturer.
When ordering spare parts and/or optional
equipment, always quote combine model and serial
number (see section “Combine Identification”).
WARRANTY
Your combine is warranted in compliance with the
regulations in force in your country and the
agreements made with your Dealer.
However, the warranty becomes void in the
following situations:
a.) If the machine has been used inappropriately.
b.) If adjustments and maintenance have not been
carried out according to the instructions in this
manual.
c.) If the failures are caused by the use of
non-genuine spare parts or accessories.
d.) If damage is the result of carelessness,
negligence, inappropriate use of the machine
or operational errors.
If the safety devices are removed and/or
non-genuine spare parts are used, the
warranty becomes void automatically and the
manufacturer disclaims any liability.
The warranty applies only to repair or free
replacement of parts proving defective after a
careful inspection by the manufacturer (excluding
wear parts and tyres), as described in the Combine
Service Record Book. In the event that warranted
parts are replaced or repaired, warranty terms are
not extended. The customer can assert his
warranty rights only insofar as the warranty
conditions contained in the Service Record Book
have been observed.
LUBRICANTS
Your Dealer can provide a wide range of special
lubricants, produced according to the specific
technical specifications of the combine.
For these combines we recommend the use of the
lubricants listed on page 5-40 and on page 5-41.
Always use genuine AGCO parts.
Find manuals at http://best-manuals.com/search?&s=MF-LA327316011

GENERAL INFORMATION
Operator's Manual Combines MF 7360-7370 BETA - EN - LA327316011 - 09/2011 1-3
1.2 APPROPRIATE USE
7300 series combines are designed as self-propelled units with a diesel engine.
The machines are manufactured exclusively for usual agricultural purposes, i.e. for harvesting cereal, seed,
rice, maize, soya, etc. by cutting or picking-up the crop, threshing and separating the grains from the ears,
delivering the grains in the grain tank and unloading them into the grain wagon.
When operating the machine, make sure the cab doors are shut. The operator and instructor, if present, must
remain seated in their respective seats with their seatbelts fastened (the operator should not drive the
machine when standing).
The machines may be operated only by skilled personnel, who are thoroughly familiar with all machine
functions and their operation.
Machine stability is ensured on the following inclinations, on condition that the ground is firm and the tyres
offer sufficient grip:
• 30% (18 °) longitudinally (uphill and downhill).
•30%(18°)crosswise.
7360 and 7370 models
The above combine models are designed for working on level ground to ensure even distribution of the crop
inside the machine. These models HAVE NOT been developed for working on sloping ground.
7360 PL and 7370 PL models
These models have been expressly designed for harvesting crops on hilly but firm ground.
The front levelling system ensures that the machine body remains perfectly horizontal up to a gradient of
20%.
The system that varies the front track width operates correctly only when the machine is in motion.
TABLE TYPES (please see the specific Operator's Manual)
The above-mentioned combines may use 4.80, 5.40, 6.00, 7.00 or 7.60 m cutting tables.
NOTE: In this manual, the term “table/s” signifies both the cutting table and the maize header when used
generically. The term “cutting table” refers to the assembly consisting of reel, cutting bar, table auger, etc.
used to harvest cereal, rice, soya, etc. The term “maize header” refers to the equipment formed by stalk
grippers, stripping blades, conveyor chains, etc. used for maize harvesting.
Find manuals at http://best-manuals.com/search?&s=MF-LA327316011

GENERAL INFORMATION
1-4 Operator's Manual Combines MF 7360-7370 BETA - EN - LA327316011 - 09/2011
1.3 COMBINE IDENTIFICATION
The combine and its main components are
identified by serial numbers and/or production
codes.
The position of the different identification data is
described below.
NOTE: Always quote the combine serial number
when contacting your Dealer for spare parts or
assistance.
Combine approval and safety plates
Fig. 1 – Fig. 3
The manufacturer's type plate (1), statutory for all
countries (or 2, for France only), is positioned on
the outer right-hand side of the operator platform
and shows the following information:
• Combine type.
• Approval number.
• Combine serial number.
• Weight (on both axles).
• Towing weight.
For further details, please refer to the type approval
certificate.
The safety plate (3) is located next to the approval
plate, and guarantees that the combine was built in
compliance with Machinery Directive 2006/42/EC
as well as Directive 2004/108/EC.
This plate shows the following information:
• Manufacturing year.
•Model.
• Combine serial number.
• Crop type.
• Total weight (normal configuration).
• Maximum towing weight.
• Maximum vertical load on the trailer hitch.
In certain countries (e.g. Russia) these two plates
are positioned next to an additional decal/plate
corresponding to the approval for that specific
country.
Fig. 1
Fig. 2
Fig. 3
1
2
3
1
23
Find manuals at http://best-manuals.com/search?&s=MF-LA327316011

GENERAL INFORMATION
Operator's Manual Combines MF 7360-7370 BETA - EN - LA327316011 - 09/2011 1-5
Combine identification
Fig. 4
Combine type and serial number appear on the
plate and are also punched into the rear right-hand
side of the frame (1).











Engine Identification
Fig. 5
The engine is identified by the type plate (1) in the
middle of the cylinder block.
The following information appears on the plate (1):
• Engine manufacturer
•Enginetype
• Engine power and rated speed
• Engine serial number
• Valve clearance
• Customer reference code
• Idling speed
• Compliance with Directive 97/68/EC
• Name of the engine assembler.
The engine serial number is always also stamped
on the cylinder block.
Cutting table identification
Fig. 6
The cutting table is identified by a metal plate
positioned on the left-hand side of the table body
above the drive shaft, or on the left-hand side.
Fig. 4
Fig. 5
1
1
Fig. 6
Find manuals at http://best-manuals.com/search?&s=MF-LA327316011

GENERAL INFORMATION
1-6 Operator's Manual Combines MF 7360-7370 BETA - EN - LA327316011 - 09/2011
Cab identification
Fig. 7
The type plate is located on the outside of the cab,
in the bottom left-hand corner.
Hydrostatic pump identification
Fig. 8
Identification of the hydrostatic pump is facilitated
by means of a plate located on the pump body front
part.
Hydrostatic motor identification
Fig. 9
Identification of the hydrostatic motor is facilitated
by means of a plate located on the motor body
lower part.
Fig. 7
Fig. 8
Fig. 9
Find manuals at http://best-manuals.com/search?&s=MF-LA327316011