Maytronics Dolphin Classic 5 User manual

Dolphin Classic 5 / Top 5 Pool Cleaner
by
by
8151643
EN
FR
IT
ES
DE
NL
PT
Operating Instructions ..................................
Mode d'emploi ..............................................
Instruzioni per l’uso .......................................
Instrucciones de uso .....................................
Bedienungsanleitung ....................................
Gebruikershandleiding .................................
Instruções de operação ................................
p. 1-10
p. 11-20
p. 21-30
p. 31-40
s. 41-50
p. 51-60
p. 61-70

Dolphin Classic 5 / Top 5 Pool Cleaner | Operating Instructions 1
Contents
1. INTRODUCTION .............................................................................2
2. SPECIFICATIONS ............................................................................2
3. WARNINGS AND CAUTIONS........................................................2
3.1 Warnings.................................................................................2
3.2 Cautions..................................................................................2
4. POOL CLEANER PARTS..................................................................3
5. USING THE POOL CLEANER.........................................................4
5.1 Setup.......................................................................................4
5.2 Putting the Pool Cleaner into the pool................................5
5.3 Removing the Pool Cleaner from the pool..........................5
5.4 Maintenance...........................................................................6
5.5 Off-season storage ................................................................7
6. POWER SUPPLY - model Top 5 only .............................................8
7. REMOTE CONTROL UNIT - model Top 5 only.............................9
CADDY ASSEMBLY .............................................................................71
Robotic Pool Cleaner
Dolphin Classic 5 / Top 5
Operating Instructions
EN

2Dolphin Classic 5 / Top 5 Pool Cleaner | Operating Instructions
Robotic Pool Cleaner Dolphin Classic 5 / Top 5
Operating Instructions
1. INTRODUCTION
Thank you for purchasing a Maytronics Robotic Pool Cleaner.
We are sure that your Maytronics Robotic Pool Cleaner will provide you with reliable, convenient and
cost effective pool cleaning. Its reliable filtration in all pool conditions and all-surface climbing brush
enhance maximum pool hygiene.
The Robotic Pool Cleaners by Maytronics deliver advanced cleaning technologys, long lasting
performance and easy maintenance.
2. SPECIFICATIONS
Motor protection: IP 68
Minimum depth: 0.80m/2.6ft
Maximum depth: 5m/16.4ft
3. WARNINGS AND CAUTIONS
3.1 Warnings
• Use the originally supplied power supply only
• Ensure the electrical outlet is protected by a ground fault interrupter (GFI) or an earth
leakage interrupter (ELI)
• Keep the power supply out of standing water
• Position the power supply at least 3m/10ft away from the edge of the pool
• Do not enter the pool while the pool cleaner is working
• Unplug the power supply before servicing
3.2 Cautions
When not in use store the Pool Cleaner on the Caddy in a shaded area.
Use the Pool Cleaner in the following water conditions only:
Chlorine Maximum 4 ppm
pH 7.0 - 7.8
Temperature 6 – 34°C / 43-93°F
NaCl Maximum 5000 ppm
CAUTION

Dolphin Classic 5 / Top 5 Pool Cleaner | Operating Instructions 3
4. POOL CLEANER PARTS
Robotic Pool Cleaner Model Classic 5
Frame Cartridges and 4 ultra-fine filters Net filters Bottom lid and filter Bag
Combined Brush
All surface climbing brush
ideal for most pool surfaces
PVC Brush
For concrete, PVC,
fiberglass and liner.
Wonder Brush
For smooth ceramics.
Optional Brushes
Wonder Brush
For smooth ceramics.
Combined Brush
All surface climbing brush
ideal for most pool surfaces
PVC Brush
For concrete, PVC,
fiberglass and liner.
Optional Brushes
Brushes
Filtration options
Robotic Pool Cleaner Model Top 5
Power supply unit
<30 VDC; IP 54
Remote
control unit

4Dolphin Classic 5 / Top 5 Pool Cleaner | Operating Instructions
5. USING THE POOL CLEANER
5.1 Set Up
Initial float set up prior to first use - Classic 5 model only
•Placecableattherightsideinfrontofthehandle.
•Floatpositionwithvarioustypeofbrushes:
Attach the floating cable to the
power supply by inserting it
with the notch on the
connector (1) lined up with the
groove in the socket on the
power supply and turning
clockwise (2).
click
clickclick
click
click
click
click
click
click
click
click
click
click
clickclick
click
•Pulloatout
GFI/ELI
40°C Max
104°F Max