Meanwell ELG-150-C Series User manual

File Name:ELG-150-C-SPEC 2019-10-25
105~150W Constant Current Mode LED Driver ELG-150-C series
■  ■ 
■ 
    


■ 



℃℃




‧
‧
‧
‧
‧
‧


‧
‧
‧
‧
‧
‧
‧
‧
 



A








 



 
 IP67
IP65


 


Dx










  
 
{
IS 15885(Part 2/Sec13)
R-41027766
THOMAS SAMUEL
THOMAS SAMUEL
(for 700A,1050A,700DA only)


  
 


105~150W Constant Current Mode LED Driver ELG-150-C series
SPECIFICATION
MODEL
RATED CURRENT
RATED
POWER
OUTPUT
CURRENT ADJ. RANGE
SET UP TIME Note.4
VOLTAGE RANGE Note.3
FREQUENCY RANGE
POWER FACTOR (Typ.)
EFFICIENCY (Typ.)
AC CURRENT (Typ.)
INPUT
INRUSH CURRENT(Typ.)
LEAKAGE CURRENT
SAFETY STANDARDS
EMC IMMUNITY
WORKING TEMP.
WORKING HUMIDITY
STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
MTBF
DIMENSION
OTHERS
NOTE
PACKING
OVER TEMPERATURE
OVER VOLTAGE
1600ms/115VAC 500ms/230VAC
(Please refer to "STATIC CHARACTERISTIC" section)
47 ~ 63Hz
<0.75mA / 277VAC
Compliance to EN55015,EN61000-3-2 Class C (@load≧60%) ; EN61000-3-3 ;; GB17743,GB17625.1
EAC TP TC 020; KC KN15,KN61547
20 ~ 95% RH non-condensing
-40 ~ +80℃, 10 ~ 95% RH
±0.03%/℃ (0 ~ 60℃)
10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
ENVIRONMENT
EMC EMISSION
SAFETY &
EMC
PROTECTION
Shut down o/p voltage, re-power on to recover
Shut down o/p voltage, re-power on to recover
SHORT CIRCUIT Hiccup mode, recovers automatically after fault condition is removed
I/P-O/P:3.75KVAC I/P-FG:2.0KVAC O/P-FG:1.5KVAC
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
CURRENT TOLERANCE
±5.0%
CONSTANT CURRENT REGION Note.2
TOTAL HARMONIC DISTORTION
OPEN CIRCUIT VOLTAGE(max.)
Adjustable for A/AB-Type only (via built-in potentiometer)
COLD START 65A(twidth=485μs measured at 50% Ipeak)/230VAC; Per NEMA 410
MAX. No. of PSUs on 16A
CIRCUIT BREAKER 3 units (circuit breaker of type B) / 6 units (circuit breaker of type C) at 230VAC
Tcase=-40 ~ +90℃ (Please refer to “ OUTPUT LOAD vs TEMPERATURE” section)
MAX. CASE TEMP. Tcase=+90℃
Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, light industry level (surge immunity Line-Earth 6KV, Line-Line 4KV),
EAC TP TC 020; KC KN15,KN61547
UL8750(type”HL”)(except for BE-type), CSA C22.2 No. 250.13-12; independent, EN/AS/NZS 61347-1,EN/AS/NZS 61347-2-13
℃






℃

℃℃


CURRENT RIPPLE 5.0% max. @rated current
100 ~ 305VAC 142 ~ 431VDC continue,320VAC for 24Hrs; 360VAC for 1Hr
ELG-150-C700
107 ~ 214V
700mA
ELG-150-C1050
72 ~ 143V
1050mA
150 ~ 300V
ELG-150-C500
500mA
ELG-150-C1400
54 ~ 107V
1400mA
ELG-150-C1750
43 ~ 86V
1750mA
36 ~ 72V
2100mA
ELG-150-C2100
225V 151V
315V 115V 94V 80V
350 ~ 700mA 525 ~ 1050mA
250 ~ 500mA 700 ~ 1400mA 875 ~ 1750mA 1050 ~ 2100mA
92% 92%
92% 91% 91% 91%
1.7A / 115VAC 0.9A / 230VAC 0.7A/277VAC
230 ~ 265V 155 ~ 180V
320 ~ 360V 128 ~ 150V 96 ~ 106V 82 ~ 92V
219*63*35.5 mm (L*W*H)
0.95Kg; 16pcs / 16.0kg / 0.77CUFT
EN62384; ,EAC TP TC 004,BISIS15885(for 700A,1050A,700DA only),IP65 or IP67;GB19510.1,GB19510.14
KC61347-1,KC61347-2-13 approved
PF≧0.97/115VAC, PF≧0.95/230VAC, PF≧0.92/277VAC@full load
(Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section)
THD< 20%(@load≧50%/115VC; @load≧60%/230VAC; @load≧75%/277VAC)
(Please refer to “TOTAL HARMONIC DISTORTION(THD)” section)
AUXILIARY DC OUTPUT Nominal 15V(deviation 11.5~15.5V)@0.3A for BE-Type only
No load power consumption <0.5W for Blank / A / Dx / D2-Type
NO LOAD / STANDBY
POWER CONSUMPTION Standby power consumption <0.5W for B / AB / DA-Type
1098.95K hrs min. Telcordia SR-332 (Bellcore) 308.5Khrs min. MIL-HDBK-217F (25℃)
105W
105W 105W
105W 105W 105W
200VAC ~ 305VAC
100VAC ~ 180VAC
149.8W 150.15W
150W 149.8W 150.5W 151.2W
(For BE Type only)
(Except for BE Type)
(For All the Types)
134.4W
135W 133W
134.4W 133W 134.4W
CONSTANT CURRENT REGION Note.2
(For BE Type only)
107 ~ 192V 72 ~ 128V
150 ~ 270V 54 ~ 95V 43 ~ 76V 36 ~ 64V
EFFICIENCY (Typ.)(for BE Type only)
DALI STANDARDS
90% 90%
90% 89% 89% 89%
File Name:ELG-150-C-SPEC 2019-10-25
Compliance to IEC62386-101,102,(207 by request) for DA Type only

105~150W Constant Current Mode LED Driver ELG-150-C series
BLOCK DIAGRAM
DETECTION
PWM & PFC CIRCUIT
O.L.P.O.T.P.
EMI FILTER
RECTIFIERS
POWER
SWITCHING
FILTER
&
RECTIFIERS Vo+
Vo-
I/P
CONTROL
O.V.P.
&
O.L.P.
PFC
CIRCUIT
PFC fosc : 50~120KHz
PWM fosc : 60~130KHz
DIM+
(B Type)
DIM-
DRIVING METHODS OF LED MODULE
※ This series works in constant current mode to directly drive the LEDs.
Typical output current normalized by rated current (%)
In the constant current region, the highest voltage at the output of the driver
depends on the configuration of the end systems.
Should there be any compatibility issues, please contact MEAN WELL.
100
50
(min.)
Vo(%)
50 100 Io(%)
Constant
Current area
Hiccup
Protection
◎ This characteristic applies to Blank/A/B/AB/DX/D2/BE-Type,
For DA-Type, the Constant Current area is 60%~100% Vo.
CASE :Protective Earth
File Name:ELG-150-C-SPEC 2019-10-25

AC/L(Brown)
AC/N(Blue)
105~150W Constant Current Mode LED Driver ELG-150-C series
DIMMING OPERATION
ELG-150-C
※ 3 in 1 dimming function (for B/AB-Type)
‧Output constant current level can be adjusted by applying one of the three methodologies between DIM+ and DIM-:
0 ~ 10VDC, or 10V PWM signal or resistance.
‧Direct connecting to LEDs is suggested. It is not suitable to be used with additional drivers.
‧Dimming source current from power supply: 100 A (typ.)μ
◎ Applying additive 0 ~ 10VDC
◎ Applying additive 10V PWM signal (frequency range 100Hz ~ 3KHz):
◎ Applying additive resistance:
Note : 1. Min. dimming level is about 8% and the output current is not defined when 0%< Iout<8%.
2. The output current could drop down to 0% when dimming input is about 0kΩ or 0Vdc, or 10V PWM signal with 0% duty cycle.
Vo+
Vo-
DIM+
DIM-
++
+
--
-
“DO NOT connect "DIM- to Vo-"
Additive Voltage
Vo+
Vo-
DIM+
DIM-
++
--
“DO NOT connect "DIM- to Vo-"
Additive PWM signal
Vo+
Vo-
DIM+
DIM-
++
--
“DO NOT connect "DIM- to Vo-"
Additive Resistance
0V 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V
10%
0%
20%
30%
40%
50%
60%
70%
80%
90%
100%
Output current (%)
0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
10%
0%
20%
30%
40%
50%
60%
70%
80%
90%
100%
Output current (%)
10%
0%
20%
30%
40%
50%
60%
70%
80%
90%
100%
Output current (%)
Dimming input: Additive voltage
Duty cycle of additive 10V PWM signal dimming input
* DIM+ for B/AB-Type
DA+ for DA-Type
PROG+ for D2-Type
* *DIM- for B/AB-Type
DA- for DA-Type
PROG- for D2-Type
Short
10K/N 20K/N 30K/N 40K/N 50K/N 60K/N 70K/N 80K/N 90K/N 100K/N
(N=driver quantity forsynchronizeddimmingoperation)
Dimming input: Additive resistance
DIM-(Black)**
DIM+( )*Gray
Vo+(Brown)
Vo-(Blue)
File Name:ELG-150-C-SPEC 2019-10-25

105~150W Constant Current Mode LED Driver ELG-150-C series
※ DALI Interface (primary side; for DA-Type)
‧Apply DALI signal between DA+ and DA-.
‧DALI protocol comprises 16 groups and 64 addresses.
‧First step is fixed at 8% of output.
※ Smart timer dimming function (for Dxx-Type by User definition)
MEAN WELL Smart timer dimming primarily provides the adaptive proportion dimming profile for the output constant current level to perform up to 14
consecutive hours. 3 dimming profiles hereunder are defined accounting for the most frequently seen applications. If other options may be needed,
please contact MEAN WELL for details.
Ex : ◎ D01-Type: the profile recommended for residential lighting
Ex: ◎ D02-Type: the profile recommended for street lighting
**: TIME matches Operating Time in the diagram whereas LEVEL matches Dimming Level.
Example: If a residential lighting application adopts D01-Type, when turning on the power supply at 6:00pm, for instance:
[1] The power supply will switch to the constant current level at 100% starting from 6:00pm.
[2] The power supply will switch to the constant current level at 70% in turn, starting from 0:00am, which is 06:00 after the power supply turns on.
[3] The power supply will switch to the constant current level at 50% in turn, starting from 1:00am, which is 07:00 after the power supply turns on.
[4] The power supply will switch to the constant current level at 70% in turn, starting from 5:00am, which is 11:00 after the power supply turns on.
The constant current level remains till 8:00am, which is 14:00 after the power supply turns on.
**: TIME matches Operating Time in the diagram whereas LEVEL matches Dimming Level.
Example: If a street lighting application adopts D02-Type, when turning on the power supply at 5:00pm, for instance:
[1] The power supply will switch to the constant current level at 50% starting from 5:00pm.
[2] The power supply will switch to the constant current level at 80% in turn, starting from 6:00pm, which is 01:00 after the power supply turns on.
[3] The power supply will switch to the constant current level at 100% in turn, starting from 8:00pm, which is 03:00 after the power supply turns on.
[4] The power supply will switch to the constant current level at 60% in turn, starting from 1:00am, which is 08:00 after the power supply turns on.
[5] The power supply will switch to the constant current level at 80% in turn, starting from 4:00am, which is 11:00 after the power supply turns on. The
constant current level remains till 6:30am, which is 14:00 after the power supply turns on.
Set up for D01-Type in Smart timer dimming software program:
Set up for D02-Type in Smart timer dimming software program:
TIME**
TIME**
06:00
01:00
T1
T1
T2
T2
T3
T3
T4
T4 T5
07:00
03:00
11:00
8:00 11:00
---
---
LEVEL**
LEVEL**
100% 70%
80%50%
50%
100%
70%
60% 80%
Dimming Level(%)
Operating Time(HH:MM)
Dimming Level(%)
Operating Time(HH:MM)
File Name:ELG-150-C-SPEC 2019-10-25

105~150W Constant Current Mode LED Driver ELG-150-C series
Ex: ◎ D03-Type: the profile recommended for tunnel lighting
Set up for D03-Type in Smart timer dimming software program:
TIME** 01:30
T1 T2 T3
11:00 ---
LEVEL** 70% 100% 70%
**: TIME matches Operating Time in the diagram whereas LEVEL matches Dimming Level.
Example: If a tunnel lighting application adopts D03-Type, when turning on the power supply at 4:30pm, for instance:
[1] The power supply will switch to the constant current level at 70% starting from 4:30pm.
[2] The power supply will switch to the constant current level at 100% in turn, starting from 6:00pm, which is 01:30 after the power supply turns on.
[3] The power supply will switch to the constant current level at 70% in turn, starting from 5:00am, which is 11:00 after the power supply turns on.
The constant current level remains till 6:30am, which is 14:00 after the power supply turns on.
Dimming Level(%)
Operating Time(HH:MM)
File Name:ELG-150-C-SPEC 2019-10-25

-25
LOAD
105~150W Constant Current Mode LED Driver ELG-150-C series
PF
LOAD
OUTPUT LOAD vs TEMPERATURE(Note.7)
TOTAL HARMONIC DISTORTION (THD)
AMBIENT TEMPERATURE,Ta ( )℃
LOAD (%)
INPUT VOLTAGE (V) 60Hz
LOAD (%)
(HORIZONTAL)
POWER FACTOR (PF) CHARACTERISTIC
Tcase ( )℃
LOAD (%)
(HORIZONTAL)
※De-rating is needed under low input voltage.
EFFICIENCY vs LOAD
ELG-150-C series possess superior working efficiency that up to 92% can
be reached in field applications.
-40 -25 0 20 45 55 65 75 90
20
40
60
80
100
※500mA Model, Tcase at 75℃※500mA Model, Tcase at 75℃
EFFICIENCY(%)
THD
LOAD
※Tcase at 75℃
230VAC
input only
-40 -25 0-10 15 30 50 60 70
20
40
60
80
100
100 120 140 160 180 200 240 250 260 270 280 305
100
90
80
70
60
50
40
STATIC CHARACTERISTIC
230VAC
input only
90
for BE Type
80
82
84
86
88
90
92
94
50% 60% 70% 80% 90% 100%
277V(150W)
230V(150W)
115V(105W)
55
File Name:ELG-150-C-SPEC 2019-10-25
0.86
0.88
0.90
0.92
0.94
0.96
0.98
1.00
50% 60% 70% 80% 90% 100%
277V(150W)
230V(150W)
115V(105W)
2%
4%
6%
8%
10%
12%
14%
16%
18%
20%
22%
50% 60% 70% 80% 90% 100%
277VAC(150W)
230VAC(150W)
115VAC(105W)

LIFE TIME
Tc a s e )(℃
LIFETIME(Kh)
105~150W Constant Current Mode LED Driver ELG-150-C series
0
20
40
60
80
100
120
20 30 40 50 60 70 80 90
File Name:ELG-150-C-SPEC 2019-10-25

MECHANICAL SPECIFICATION
105~150W Constant Current Mode LED Driver ELG-150-C series
CASE NO.: 237A Unit:mm
※ Blank-Type
tc
‧ : Max. Case Temperature
※ A-Type(except for 1750mA, 2100mA models)
tc
tc
‧ : Max. Case Temperature
tc
208
219
195 300±20
300±20
45.8
63
35.5
35
AC/L(Brown)
AC/N(Blue)
105
20
4-ψ4.5
208
219
195 300±20
300±20
45.8
63
35.5
35
AC/L(Brown)
AC/N(Blue)
50.5
16.5
105
20
4-ψ4.5
Vo+(Brown)
Vo-(Blue)
SJOW 17AWGx2C
2
&H05RN-F 1.0mm
SJOW 17AWGx2C
2
&H05RN-F 1.0mm
SJOW 17AWGx2C
2
&H05RN-F 1.0mm
SJOW 17AWGx2C
2
&H05RN-F 1.0mm
Vo+(Brown)
Vo-(Blue)
File Name:ELG-150-C-SPEC 2019-10-25

208
219
195 300±20
300±20
45.8
63
35.5
35
AC/L(Brown)
AC/N(Blue)
105
20
※ B/DA/D2-Type
※ A-Type(for 1750mA, 2100mA models)
208
219
195 300±20
300±20
45.8
63
35.5
35
AC/L(Brown)
AC/N(Blue)
50
21.5
105
20
4-ψ4.5
4-ψ4.5
105~150W Constant Current Mode LED Driver ELG-150-C series
tc
‧ : Max. Case Temperature
tc
tc
‧ : Max. Case Temperature
tc
* DIM+ for B-Type
DA+ for DA-Type
PROG+ for D2-Type
* *DIM- for B-Type
DA- for DA-Type
PROG- for D2-Type
SJOW 17AWGx2C
2
&H05RN-F 1.0mm
SJOW 17AWGx2C
2
&H05RN-F 1.0mm
Vo+(Brown)
Vo-(Blue)
DIM-(Black)**
DIM+( )*Gray
Vo+(Brown)
Vo-(Blue)
SJOW 17AWGx2C
2
&H05RN-F 1.0mm
SJOW 17AWGx2C
2
&H05RN-F 1.0mm
SJOW 17AWGx2C
2
&H05RN-F 1.0mm
File Name:ELG-150-C-SPEC 2019-10-25

208
219
195 300±20
300±20
45.8
63
35.5
35
AC/L(Brown)
AC/N(Blue)
105
20
※ AB-Type(except for 1750mA, 2100mA models)
50
21.5
4-ψ4.5
105~150W Constant Current Mode LED Driver ELG-150-C series
tc
‧ : Max. Case Temperature
tc
DIM-(Black)
DIM+( )Gray
Vo+(Brown)
Vo-(Blue)
SJOW 17AWGx2C
2
&H05RN-F 1.0mm
SJOW 17AWGx2C
2
&H05RN-F 1.0mm
SJOW 17AWGx2C
2
&H05RN-F 1.0mm
File Name:ELG-150-C-SPEC 2019-10-25
208
219
195 300±20
300±20
45.8
63
35.5
35
AC/L(Brown)
AC/N(Blue)
105
20
※ AB-Type(for 1750mA, 2100mA models)
4-ψ4.5
tc
‧ : Max. Case Temperature
tc
DIM-(Black)
DIM+( )Gray
Vo+(Brown)
Vo-(Blue)
SJOW 17AWGx2C
2
&H05RN-F 1.0mm
SJOW 17AWGx2C
2
&H05RN-F 1.0mm
SJOW 17AWGx2C
2
&H05RN-F 1.0mm
50.5
16.5

208
219
195 200±20
300±20
45.8
63
35.5
35
105
20
4-ψ4.5
Please refer to : http://www.meanwell.com/manual.html
105~150W Constant Current Mode LED Driver ELG-150-C series
INSTALLATION MANUAL
※ BE-Type
tc
‧ : Max. Case Temperature
tc
SJOW 17AWGx3C
2
&H05RN-F 1.0mm
DIM-(Black)
DIM+( )Gray
AUX-(White)
AUX+( )Red
Vo+(Brown)
Vo-(Blue)
SJOW 17AWGx2C
2
&H05RN-F 1.0mm
SJOW 17AWGx4C
2
&H05RN-F 1.0mm
AC/L(Brown)
AC/N(Blue)
※ 3Y Model (3-wire input)
PE (Green/Yellow) tc
‧ : Max. Case Temperature
tc
208
219
195
300±20
45.8
63
105
20
4-ψ4.5
SJOW 17AWGx3C
2
&H05RN-F 1.0mm
SJOW 17AWGx2C
2
&H05RN-F 1.0mm
◎ Note1: Please connect the case to PE for the complete EMC deliverance and safety use.
◎ Note2: Please contact MEAN WELL for input wiring option with PE.
AC/L(Brown)
AC/N(Blue)
FG (Green/Yellow)
File Name:ELG-150-C-SPEC 2019-10-25
300±20