Micromax E471 Manual

E471 Flashing Procedure
1. Technical Specifications :
Particular
Remarks
Key Matrix For Flashing
N/A
Chipset
MSM8939 OCTA core
Android Version
Android 5.0
Processor Frequency
1.5GHz
Network Mode
4G WIFI
ROM
16G
RAM
2G
Internal memory
12G
Expandable Memory
32G
Factory mode code
*#87#
Good Earpiece volume
32 ohm
Good Loudspeaker volume
8 ohm
Good Mic volume
2200 ohm
Good Vibrator volume
32 ohm

E471 Flashing Procedure
2. CAUTIONS
I. Flashing & Servicing must be undertaken by qualified personnel only.
II. Ensure all work is carried out at an anti-static workstation and that an anti-static wrist strap is worn.
III. Use only approved Tools & components as specified in the parts list.
IV. Ensure all components, modules, screws, and insulators are correctly re-fitted after servicing and
alignment
V. Ensure all cables and wires are repositioned correctly if Handset disassembled
VI. Electrostatic discharge can easily damage the sensitive components of electronic products.
Therefore, Service Centre must adhere the precautions which mentioned above.

E471 Flashing Procedure
3. Flashing Procedure
1. Open SW folder. Double click “8939_fastboot_all_images”
2. Power off the handset. Press volume down key and power key together until the Micromax logo is
coming. Then connect the handset to PC. It will start to download sw automatically.
Thanks
For any Query or suggestion, Please write to [e-mail]