Mitutoyo ID-C User manual

No. 99MAH057A1
Date of publication: April 27, 2022
User's Manual
ABSOLUTE Digimatic Indicator
ID-C
ID-C0525NXB
ID-C0525MNXB
ID-C0525ENXB
ID-C1025NXB
ID-C1025MNXB
ID-C1025ENXB
ID-C0550NXB
ID-C0550MNXB
ID-C0550ENXB
ID-C1050NXB
ID-C1050MNXB
ID-C1050ENXB

No. 99MAH057A
■Notice regarding this document
yThe contents of this document are based on information current as of April
2022.
yNo part or whole of this document may be transmitted or reproduced by any
means without prior written permission of Mitutoyo Corporation.
ySomescreendisplaysinthisdocumentmaybehighlighted,simpliedor
partially omitted for convenience of explanation. In addition, some of them
maydi󰀨erfromactualonestotheextentthatnouserwillmisunderstandthe
functions and operations.
yThe corporation, organization and product names that appear in this
document are their trademarks or registered trademarks.
©2021-2022 Mitutoyo Corporation. All rights reserved.
■Product names and model numbers covered in this document
Product name Model number
ABSOLUTE Digimatic Indicator ID-C
ID-C0525NXB
ID-C0525MNXB
ID-C0525ENXB
ID-C1025NXB
ID-C1025MNXB
ID-C1025ENXB
ID-C0550NXB
ID-C0550MNXB
ID-C0550ENXB
ID-C1050NXB
ID-C1050MNXB
ID-C1050ENXB

iNo. 99MAH057A
CONVENTIONS AND WORDING USED IN THIS MANUAL
■Safety reminder conventions and wording warning against potential
hazards
DANGER
Indicates a hazard with a high level of risk which, if not avoided,
will result in death or serious injury.
WARNING
Indicates a hazard with a medium level of risk which, if not
avoided, could result in death or serious injury.
CAUTION
Indicates a hazard with a low level of risk which, if not avoided,
could result in minor or moderate injury.
NOTICE
Indicates a potentially hazardous situation which, if not avoided,
may result in property damage.
Flammable material
Alertstheusertoaspecichazardoussituationthatmeans
"Caution, risk of igniting gas".
■Conventions indicating prohibited and mandatory actions
Indicates concrete information
about prohibited actions.
Indicates concrete information
about mandatory actions.
■Conventions and wording indicating referential information or
reference location
Tips
Indicates further information and details relevant for the operating methods
and procedures that are explained in that section.
Indicates reference location if there is information that should be referred to
in this document or an extraneous User's Manual.
E.g.: For details about XX, see "1.2 Names and Dimensions of
Components" on page 2.

ii No. 99MAH057A
Safety Precautions
Read these "Safety Precautions" thoroughly before operating the product to use
it properly.
These safety precautions include such information as to prevent injury to the
operator and other persons, damage to property and product defects. Be sure to
observe these precautions carefully.
DANGER
Do not use the product in areas where volatile gases may be generated.
There is a risk of igniting the gas.
WARNING
• Theproductisnottoberepairedormodiedbytheusers.
• If the product is dropped or otherwise damaged, turn the power OFF and remove
the battery, and then contact the agent where you purchased the product or a
Mitutoyo sales/service representative.
• Besuretousetheproductspeciedinthisdocumentwhenanoptionalitemis
required.
■Handling batteries
This product uses a lithium metal battery (CR2032). Observe the following
precautions in use.
WARNING
• Always keep batteries out of reach of children. If swallowed, consult a physician
immediately.
• Batteries should never be short-circuited, disassembled, deformed or come in
contactwithextremeheatorames.
• Ifalkalineliquidfromthebatterycomesincontactwiththeeyes,usheyes
immediately with clean water and consult a physician. If alkaline liquid from battery
comesincontactwiththeskin,ushtheexposedareathoroughlywithcleanwater.
CAUTION
Never attempt to charge the primary battery. Never reverse the positive-negative
terminals when mounting. Improper battery handling or mounting may cause
the battery to explode, cause battery leakage and/or serious bodily injury or
malfunctioning.

iii No. 99MAH057A
Precautions for Use
■Product applications and handling
yDo not apply excessive force or subject to sudden impacts such as when
dropped.
yDo not write with an electric pen, etc. This may cause damage.
yDo not operate the keys with a pointed object (such as a screwdriver or
ballpoint pen).
yAvoid loads in the direction perpendicular to the plunger movement or usage
resulting in torsion of the plunger.
■Usage environment
yAvoid using or storing in places directly exposed to sunlight, or extremely hot
or cold places.
yUse or storage in places with low or high atmospheric pressure may cause
material deterioration, etc., leading to failure.
yDo not store the product in a place with high humidity. Also, avoid usage in
places exposed to splashes of water or coolant.
yThe product may malfunction if used in areas with high electrical noise.
ySecurelyxtoanoptionalstandofdialindicator,etc.,anduseinaplace
where there is no vibration.
yErrorswillresultwhenusedinplaceswithsignicanttemperatureuctuation,
duetothethermalexpansionofstructuralcomponentsandxingjigs.Usein
placeswithminimaltemperatureuctuation.Allowtheproducttoadapttothe
ambienttemperaturewhenusinginalocationwithadi󰀨erenttemperature.
■Maintenance
yLightlywipeo󰀨dirtonthisproductwithalint-freesoftcloth.Donotuse
organic solvents such as detergents, thinner or benzine.
yDirt on the plunger may lead to malfunction. Clean with a cloth moistened
with alcohol, etc. before use.
yDo not lubricate the plunger with lubricating oil, etc.

iv No. 99MAH057A
Electromagnetic Compatibility (EMC)
This product complies with the EMC Directive and the UK Electromagnetic
Compatibility Regulations; however, if this receives electromagnetic interference
that exceeds these requirements, it will be out of warranty and require appropriate
measures.
Warranty
This product has been manufactured under strict quality management, but
should it develop problems within one year of the date of purchase in normal
use, repair shall be performed free of charge. Please contact the agent where
you purchased the product or a Mitutoyo sales/service representative
("SERVICE NETWORK" on page App-1). This warranty, however, shall not
a󰀨ectanyprovisionsoftheMitutoyoSoftwareEndUserLicenseAgreement.
If this product fails or is damaged for any of the following reasons, it will be
subject to a repair charge, even if it is still under warranty.
yFailure or damage owing to fair wear and tear
yFailure or damage owing to inappropriate handling, maintenance or repair, or
tounauthorizedmodication
yFailure or damage owing to transport, dropping, or relocation of the product
after purchase
yFailureordamageowingtore,salt,gas,abnormalvoltage,lightningsurge,
or natural disaster
yFailure or damage owing to use in combination with hardware or software
other than those designated or permitted by Mitutoyo
yFailure or damage owing to use in ultra-hazardous activities
Thiswarrantyise󰀨ectiveonlywheretheproductisproperlyinstalledand
operated in conformance with the instructions in this document within the
original country of the installation.
EXCEPT AS SPECIFIED IN THIS WARRANTY, ALL EXPRESS OR IMPLIED
CONDITIONS, REPRESENTATIONS, AND WARRANTIES OF ANY NATURE
WHATSOEVER INCLUDING, WITHOUT LIMITATION, ANY IMPLIED
WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE, NONINFRINGEMENT OR WARRANTY ARISING FROM A
COURSE OF DEALING, USAGE, OR TRADE PRACTICE, ARE HEREBY
EXCLUDED TO THE MAXIMUM EXTENT ALLOWED BY APPLICABLE LAW.
You assume responsibility for all results due to the selection of this product to
achieve your intended results.

vNo. 99MAH057A
Disclaimer
IN NO EVENT WILL MITUTOYO, ITS AFFILIATED AND RELATED
COMPANIES AND SUPPLIERS BE LIABLE FOR ANY LOST
REVENUE, PROFIT, OR DATA, OR FOR SPECIAL, DIRECT, INDIRECT,
CONSEQUENTIAL, INCIDENTAL, OR PUNITIVE DAMAGES HOWEVER
CAUSED AND REGARDLESS OF THE THEORY OF LIABILITY ARISING
OUT OF THE USE OF OR INABILITY TO USE THIS PRODUCT EVEN
IF MITUTOYO OR ITS AFFILIATED AND RELATED COMPANIES AND/
OR SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
If, notwithstanding the foregoing, Mitutoyo is found to be liable to you for any
damage or loss which arises out of or is in any way connected with use of this
productbyyou,innoeventshallMitutoyo'sand/oritsa󰀩liatedandrelated
companies' and suppliers' liability to you, whether in contract, tort (including
negligence), or otherwise, exceed the price paid by you for the product only.
The foregoing limitations shall apply even if the above-stated warranty fails of its
essential purpose.
BECAUSE SOME COUNTRIES, STATES OR JURISDICTIONS DO NOT
ALLOW THE EXCLUSION OR THE LIMITATION OF LIABILITY FOR
CONSEQUENTIAL OR INCIDENTAL DAMAGES, IN SUCH COUNTRIES,
STATES OR JURISDICTIONS, MITUTOYO'S LIABILITY SHALL BE LIMITED
TO THE EXTENT PERMITTED BY LAW.

vi No. 99MAH057A
About This Document
This document is intended to provide an overview of the product, the functions
of each component, setup, usage and maintenance details.
■How to read this document
Indicates an operating
procedure to be performed or
its outline.
Indicates supplementary
information.
Indicates the reference
location.
Indicatesspecicwork
procedures.

vii No. 99MAH057A
■Brackets, quotation marks and numbers ( 1 , 1)
The meanings of brackets, quotation marks and numbers to be used in this
document are as follows.
( ): Round brackets Represent a paraphrase of an immediately preceding
phrase or a supplementary explanation.
" ": Double quotation
marks
Represent a highlighted phrase. They also indicate
an index where information to be referenced is
described.
[ ]: Square brackets Represent an item (menu, dialog, button, tab, etc.)
that appears on the screen, or key on the controller or
keyboard. They also indicate an item to be purposely
entered or selected by the customer.
1 , 2 , 3 ...
1,2,3...
Indicates the order and the contents of tasks.
(
1 : indicates main tasks, 1: indicates detailed tasks)
■Key notations
In this manual, the names of the keys to be pressed, their operations (length and
number of times the key is pressed), and the progress directions of procedures
are indicated by arrows.
E.g.: [F2] key
F2
Press the [F2] key and release it immediately (short press).
F2
Press the [F2] key and release it after 2 seconds or longer (long
press).
[F1] key
[F2] key
[F3] key

viii No. 99MAH057A
CONVENTIONS AND WORDING USED IN THIS MANUAL ………………………… i
Safety Precautions ……………………………………………………………………… ii
Precautions for Use …………………………………………………………………… iii
Electromagnetic Compatibility (EMC) ……………………………………………… iv
Warranty ………………………………………………………………………………… iv
Disclaimer ………………………………………………………………………………… v
About This Document ………………………………………………………………… vi
Contents …………………………………………………………………………………viii
1 Overview …………………………………………………………………………… 1
1.1 Overview of This Product………………………………………………… 1
1.2 Names and Dimensions of Components ……………………………… 2
1.2.1 Main Unit ………………………………………………………………… 2
1.2.2 Display (LCD) …………………………………………………………… 4
1.2.3 Standard Accessories ………………………………………………… 6
2 Preparations before Use………………………………………………………… 7
2.1 When Used Facing Up …………………………………………………… 7
2.2 Mounting to a Stand/Jig ………………………………………………… 8
2.2.1 Mounting by Stem ……………………………………………………… 8
2.2.2 Installing with Various Backs ………………………………………… 9
2.3 Mounting the Lifting Lever and Lifting Knob …………………………… 10
2.3.1 Lifting Lever ……………………………………………………………… 10
2.3.2 Lifting Knob (Optional) ………………………………………………… 11
2.4 Contact Point Replacement……………………………………………… 12
2.5 Display Angle Adjustment ……………………………………………… 13
3 Basic Usage ……………………………………………………………………… 15
3.1 Precautions before Use ………………………………………………… 15
Contents

ix No. 99MAH057A
3.2 Installing and Replacing the Battery …………………………………… 15
3.3 Power ON/OFF …………………………………………………………… 18
3.4 Measurement Mode and Parameter Setting Mode …………………… 19
3.4.1 Measurement Mode …………………………………………………… 19
3.4.2 Parameter Setting Mode ……………………………………………… 19
3.5 Switching Measurement Systems ……………………………………… 20
3.6 Switching Unit System …………………………………………………… 21
4 Measurement Method …………………………………………………………… 23
4.1 Absolute Measurement (ABS)…………………………………………… 23
4.1.1 Setting Origin and Preset Values……………………………………… 24
4.1.2 Measurement Operations ………………………………………………26
4.2 Incremental Measurement (INC) ……………………………………… 27
4.3 Peak Detection …………………………………………………………… 28
4.4 Tolerance Judgment ……………………………………………………… 31
4.5 Display Value Hold ……………………………………………………… 32
4.6 Customizing Keys ………………………………………………………… 33
4.7 Externally Outputting the Displayed Value …………………………… 34
4.7.1 Connecting with External Devices ……………………………………34
4.7.2 External Output Operation ……………………………………………35
5 Setting Parameters ……………………………………………………………… 37
5.1 Selecting Parameter Items ……………………………………………… 37
5.2 Selecting Measurement Mode ………………………………………… 40
5.3 Selecting Unit System …………………………………………………… 41
5.4 Selecting Counting Direction …………………………………………… 42
5.5 Selecting Resolution ……………………………………………………… 44
5.6 Selecting the Tolerance Judgment Result Display Method and
Setting Allowable Values ………………………………………………… 46
5.6.1 Setting Display Method …………………………………………………46
5.6.2
Setting Allowable Values (Upper Limit Value and Lower Limit Value) ……48
5.7 SettingCalculationFunctionSelectionandCalculationCoe󰀩cient … 50

xNo. 99MAH057A
5.8 Selecting Analog Bar Display …………………………………………… 55
5.9 Selecting Switch Function ……………………………………………… 59
5.10 Setting Function Lock …………………………………………………… 63
5.11 Change Other Functions ………………………………………………… 64
5.11.1 Selecting Setting Items …………………………………………………64
5.11.2 Calibration Schedule Warning Selection/Setting ……………………65
5.11.3 Selecting Digimatic Output …………………………………………… 70
5.11.4 Auto OFF setting………………………………………………………… 71
5.11.5 All Reset …………………………………………………………………72
6 Precautions after Use …………………………………………………………… 73
7 Error Displays and Countermeasures ……………………………………… 75
8 Input/Output Functions ………………………………………………………… 81
8.1 I/O Connector……………………………………………………………… 81
8.2 DIGIMATIC d1/d2 (Output) ……………………………………………… 82
9 Specications …………………………………………………………………… 85
10 Accessories (Optional) ………………………………………………………… 91
11 O󰀨-SiteRepairs(SubjecttoCharge) ………………………………………… 93
SERVICE NETWORK ……………………………………………………………… App-1

1No. 99MAH057A
1 Overview
1 Overview
1.1 Overview of This Product
This product is a standard Digimatic indicator that digitally displays the amount
of plunger displacement.
It has the following features.
yIt is equipped with a display function for tolerance judgment results. (
"4.4
Tolerance Judgment" on page 31)
yIt can hold the peak values of the displaced measured values (runout,
maximum value, minimum value). (
"4.3 Peak Detection" on page 28)
yIt provides an analog bar display that makes it easy to check the approach to
the origin and tolerance values. (
"1.2.2 Display (LCD)" on page 4)
yDepending on how this product is used, it is possible to customize the
functions assigned to short-pressing of each key ([F1] key, [F2] key, [F3] key).
(
"4.6 Customizing Keys" on page 33)
yVarious settings can be made externally using the serial communication
function. (
"8 Input/Output Functions" on page 81)

2
1 Overview
No. 99MAH057A
1.2 Names and Dimensions of Components
1. 2 .1 Main Unit
25.4 mm stroke model
①
②
④
⑤
⑥
⑦
⑧
⑨
⑪
③
ø4.8 (0.19 in)
ID-C0525NXB
ID-C0525MNXB
ID-C0525ENXB
ø8 0
-0.009
0.375 in
ø9.52 0
-0.03
ø59 (2.32 in)
57.7 (2.27 in)
84.826
40.8
7.3
1/4 in
1.66 in
0.68 in
2.67 in
1.02 in 3.30 in
19.5
70
ø19.2 (0.76 in) 33.2 (1.31 in) 11 (0.43 in)
⑩
Unit: mm (in)
①Cap ⑦Stem
②I/O connector (with cover) ⑧Plunger
③Display (LCD) ⑨Contact point
④[F1] key ⑩Battery holder
⑤[F2] key ⑪Flat back
⑥[F3] key

3No. 99MAH057A
1 Overview
50.8 mm stroke model
ø19.2 (0.76 in) 33.2 (1.31 in) 11 (0.43 in)
ø8 0
-0.009 ø9.52 0
-0.03
85.2 (3.35 in)
110.652
97.3
19.5
65.3
7.3
1/4 in
3.74 in
0.68 in
2.62 in
2.05 in 4.32 in
ø59 (2.32 in)
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
⑪
0.375 in
ø4.8 (0.19 in)
ID-C0550NXB
ID-C0550MNXB
ID-C0550ENXB
Unit: mm (in)

4
1 Overview
No. 99MAH057A
1.2.2 Display (LCD)
⑯
⑰
⑱ ⑲ ⑳
①
⑮
⑬
⑭
⑫
⑪
②
⑩⑨
③
⑧
④
⑤
⑥
⑦
①
Calibration schedule warning
display
(
"5.11.2 Calibration Schedule
Warning Selection/Setting" on
page 65)
③
Tolerance judgment result display
(OK)
(
"5.6 Selecting the Tolerance
Judgment Result Display Method
and Setting Allowable Values" on
page 46)
②
Tolerance judgment result display
(-NG)
(
"5.6 Selecting the Tolerance
Judgment Result Display Method
and Setting Allowable Values" on
page 46)
④
Tolerance judgment result display
(+NG)
(
"5.6 Selecting the Tolerance
Judgment Result Display Method
and Setting Allowable Values" on
page 46)

5No. 99MAH057A
1 Overview
⑤Function lock display
(
"5.10 Setting Function Lock"
on page 63)
⑬Reverse counting display
(
"5.4 Selecting Counting
Direction" on page 42)
⑥Preset display
(
"4.1.1 Setting Origin and Preset
Values" on page 24)
⑭INC display
(
"4.2 Incremental Measurement
(INC)" on page 27)
⑦Unit display
(
"5.3 Selecting Unit System" on
page 41)
⑮
Calculation function display
(
"5.7 Setting Calculation
Function Selection and Calculation
Coe󰀩cient"onpage50)
⑧Key customization display
(
"4.6 Customizing Keys" on
page 33)
⑯Analog bar display
(
"5.8 Selecting Analog Bar
Display" on page 55)
⑨Battery voltage decrease display
(
"7 Error Displays and
Countermeasures" on page 75)
⑰Analog bar scale display
(
"5.8 Selecting Analog Bar
Display" on page 55)
⑩
Measured value display (tolerance
judgment enlarged display)
(
"5.6 Selecting the Tolerance
Judgment Result Display Method
and Setting Allowable Values" on
page 46)
⑱Minimum value detection display
(
"4.3 Peak Detection" on
page 28)
⑪Hold display
(
"4.5 Display Value Hold" on
page 32)
⑲Runout width detection display
(
"4.3 Peak Detection" on
page 28)
⑫Sign display ⑳Maximum value detection display
(
"4.3 Peak Detection" on
page 28)

6
1 Overview
No. 99MAH057A
1.2.3 Standard Accessories
■Liftinglever(ngerhook)
■Battery holder opener
Tips
The upper hole can be used to attach a strap or similar to prevent loss.
■LithiummetalbatteryCR2032(forfunctionverication,1pc.)
■User's manual with warranty
■CerticateofInspection

7No. 99MAH057A
2 Preparations before Use
2 Preparations before Use
2.1 When Used Facing Up
The product can be used in orientations from the contact point facing downward
to horizontal.
When using the contact point in the upward orientation, replace the internal
coil spring with a reverse orientation coil spring (optional) as the plunger will not
return to the reference point.
Part No. 02ACA571 (25.4 mm stroke models)
Part No. 02ACA773 (50.8 mm stroke models)
B
A
1 4 2 3
1 Removethevescrewsonthebackusinga#0Phillipsscrewdriver,and
thenremovetheatback.
2 Usetweezersortheliketopinchthespringattachmenthooksinthe
orderofAandB,andthenremovethecoilspring.
Do not forcibly pull the removed coil spring by hand.
3 Attach the new coil spring to the spring attachment pins in the order of B
and A.
4 Placetheatbackandtightenthevescrewsonthebackusinga#0
Phillips screwdriver.
Tips
• When using this product in a posture where the contact point is facing downward to
horizontal, use the standard coil spring.
• Store the removed coil spring to prevent loss.

8
2 Preparations before Use
No. 99MAH057A
2.2 Mounting to a Stand/Jig
2.2.1 Mounting by Stem
Install the stem to the holder of the stand when making measurement with this
product installed on a stand, etc.
NOTICE
Wheneverpossible,avoidxingthestemdirectlywithasetscrew,etc.
The plunger may not be able to move smoothly if the screw is tightened with a
tightening torque of 300 cN•m or more to secure the stem.
21
ø8 +0.02 mm
+0.005
*ø9.52 mm (0.375 in)
ID-C0525ENXB,
ID-C1025ENXB,
ID-C0550ENXB,
ID-C1050ENXB
Stem
1 Install the stem to a holder such as a stand.
2 Tighten the holder screws.
Tips
Use a slotted holder with a *ø8 G7 (+0.005 to +0.02) mm hole for the holder/stand.
* ID-C0525ENXB, ID-C1025ENXB, ID-C0550ENXB, ID-C1050ENXB:
ø9.52 mm (0.375 in)