Montezuma M5624H User manual

OWNER'S MANUAL
56" X 24"
HUTCH
M5624H
www.montezumastorage.com

2
LIFE ORGANIZED
Montezuma is committed to helping you succeed in both your work
and personal life by being organized, prepared and equipped with
the right tools, gear and home supplies at your finger tips.
We are here to ensure that your life is organized.
Thank you for your purchase of this Montezuma Hutch.
ATTENTION
TO REDUCE THE RISK OF INJURY, THE USER MUST READ AND
UNDERSTAND THIS INSTRUCTION MANUAL BEFORE USING THIS
PRODUCT FOR THE FIRST TIME. SAVE THESE INSTRUCTIONS FOR
FUTURE REFERENCE.
Fill in the following information and retain
this owner's manual for future reference:
MODEL(S):
DATE OF PURCHASE:
PLACE OF PURCHASE:
RECEIPT NO:

3
SPECIFICATIONS
MAXIMUM SHELF WEIGHT CAPACITY: 100 lb (45 kg)
POWER STRIP
MODEL: LTS-04C/CH-04F
SURGE PROTECTIVE DEVICES
RATING: 120 V AC 15 A 60 Hz 1875 W
USB: TOTAL 2.1 A – Check your device for compatibility
USB O/P: IT EQUIPMENT ONLY
VPR: 500-1000 V (L-N) TYPE 3 SPD
CONFORMS TO UL STD. NO 1363 AND ANSI/UL STD. NO. 1449
CERTIFIED TO CSA STD. C22.2 NO. 308&8
56" x 24" HUTCH
M5624H
OVERALL DIMENSIONS:
56" W x 24-5/8" D x 25" H
(142.2 cm W x 62.5 cm D x 63.5 cm H)
NET WEIGHT: 108 lb (49 kg)
WE RECOMMEND
USING THIS HUTCH
WITH THE MONTEZUMA
56" X 24" TOOL CABINET
BKM562411TC

4
PARTS LIST
To order replacement parts, email [e-mail] or call 1-800-459-4409
(Monday–Friday, 8:00 am–4:30 pm, CST). Have the part number and quantity ready.
Replacement keys may be ordered using the code that appears on the face of the lock.
Not all parts are covered under warranty. Those parts not covered can be purchased.
REF DESCRIPTION PART NUMBER QTY
1Grommet 314027 4
2M8 x 20 Hex Bolt 321024 16
3Power Strip 333059 1
4Shelf 242035 1
5Washer 324002 16
6M8 x 40 Hex Bolt 321048 6
7Gas Strut 303218 2
8Lock and Key (1201–1204) 304166 2
3
4
5
2
1
7
8
6
x x x
The keys
are taped
to the door.

5
x x x
Lock and Key
For securing
your valuables
Washer
For use with M8 x 20
Hex Bolt
M8 x 20 Hex Bolt
6 for attaching side panels
4 for supporting adjustable shelf
6 for connecting hutch to cabinet
without worktop (optional)
M8 x 40 Hex Bolt
For connecting the hutch
and cabinet together
Power Strip
For power management
Gas Strut
For lifting the hutch lid
Shelf
For placing at
desired height
Grommet
For cord access
2
16
16
6
1
2
1
4

6
HUTCH ASSEMBLY
Unfold the hutch body as shown.
Attach the left and right side panels to the back of the hutch body using three M8 x 20
hex bolts and washers per panel.

7
Open the hutch door and install the gas strut.
Proceed with connecting the hutch to the cabinet before installing the shelf in the hutch.
HUTCH-CABINET CONNECTION
WARNING: FOR YOUR SAFETY, MOUNT THE HUTCH TO THE CABINET USING
ONLY THE HARDWARE PROVIDED.
CONNECTING THE HUTCH TO A CABINET WITH A WORKTOP
Put the hutch onto the worktop. Make sure
that both the hutch and the worktop are
flush with the front edge of the cabinet and
that there are equal gaps on the sides.

8
On the worktop, mark the locations of the six
slotted holes in the hutch.
5
1
23
4
6
Take the hutch off the cabinet. Remove the
worktop by first removing the drawers, then
loosening the M6 x 12 Phillips head bolts.
1
2
3
4
5
6
Place the worktop on the floor. Drill six 7/16"
(1.1 cm) holes at the locations you marked.
1
2
3
4
5
6

9
Place the worktop and hutch back onto the
cabinet. Make sure that both the hutch and
the worktop are flush with the front edge of
the cabinet and that there are equal gaps on
the sides.
Connect the hutch, worktop and cabinet
together using six M8 x 40 hex bolts
and washers. An open end wrench is
recommended for tightening the hex bolts.
123
4
5
6
Install the shelf in the hutch using four
M8 x 20 hex bolts and washers.
CONNECTING THE HUTCH TO A CABINET WITHOUT A WORKTOP
You may also install the hutch on the cabinet
without a worktop.
Remove the worktop by first removing the
drawers, then loosening the M6 x 12 Phillips
head bolts.
Place the hutch directly on the cabinet
top and attach with six M8 x 20 hex bolts.
An open end wrench is recommended for
tightening the hex bolts.

10
MAINTENANCE
Periodically clean the hutch front, trim, and other surfaces with mild detergent and water.
Grease and oil can be removed with most standard cleaning fluids. For safety, use a
nonflammable cleaning fluid.
SAFETY
RISK OF ELECTRIC SHOCK. To reduce the risk of electric shock, use indoors in a
dry location only. Do not plug the power strip into another power strip. Not for use for a
permanent installation.
Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Close and lock the hutch before moving this product.
DO NOT stand or lean on this product.
DO NOT mount this product on a truck bed or any other moving object. This may cause
personal injury or product damage, and will void the warranty.
Secure this product properly before moving it with a forklift.
Keep the product on level surfaces. The product could become unstable and tip if stored
or moved on an uneven surface, which may cause personal injury or product damage.

11
This product is warranted to be free from defects in materials
and workmanship for a period of five (5) years from the date
of original purchase.
If this product is defective, email [e-mail]
or call 1-800-459-4409 (Monday–Friday, 8:00 am–4:30 pm, CST). If the
product is defective, we will replace the defective part at no cost to you.
Please do not ship your product back to the store or to us
unless we send you written instructions for return.
In the event it becomes necessary for your product
to be returned, we will notify you how to proceed.
A copy of your original purchase receipt must accompany
the returned product.

M5624H_01/19
Manufactured by:
QUALITY CRAFT
Surrey, BC, Canada V3S 5N4
[e-mail]
1-800-459-4409
(Monday to Friday, 8:00 am–4:30 pm, CST)
Made in China
www.montezumastorage.com