Montezuma MKDB30B User manual

OWNER'S MANUAL
STEEL
UTILITY BOXES
MKDB30B/MKDB36B/MKDB42B/MKDB47B
www.montezumastorage.com

2
LIFE ORGANIZED
Montezuma is committed to helping you succeed in both your work
and personal life by being organized, prepared and equipped with
the right tools, gear and home supplies at your finger tips.
Keep your life organized with Montezuma.
Thank you for your purchase of this Montezuma Utility Box
ATTENTION
TO REDUCE THE RISK OF INJURY, THE USER MUST READ AND
UNDERSTAND THIS INSTRUCTION MANUAL BEFORE USING THIS
PRODUCT FOR THE FIRST TIME. SAVE THESE INSTRUCTIONS FOR
FUTURE REFERENCE.
Fill in the following information and retain
this owner's manual for future reference:
MODEL(S):
DATE OF PURCHASE:
PLACE OF PURCHASE:
RECEIPT NO:

3
SPECIFICATIONS
30" STEEL UTILITY BOX
MKDB30B
OVERALL DIMENSIONS: 30" W x 12-5/8" D x 8-7/8" H
(76.2 cm W x 32 cm D x 22.4 cm H)
36" STEEL UTILITY BOX
MKDB36B
OVERALL DIMENSIONS: 36" W x 14-1/4" D x 10-5/8" H
(91.4 cm W x 36.1 cm D x 26.9 cm H)
42" STEEL UTILITY BOX
MKDB42B
OVERALL DIMENSIONS: 42" W x 15-3/4" D x 12-3/8" H
(106.7 cm W x 40 cm D x 31.4 cm H)
47" STEEL UTILITY BOX
MKDB47B
OVERALL DIMENSIONS: 47-1/4" W x 17-1/4" D x 14-1/4" H
(120.1 cm W x 43.8 cm D x 36.2 cm H)
* Height does not include feet.

4
PARTS LIST
To order replacement parts, email [e-mail] or call 1-800-459-4409
(Monday–Friday, 8:00 am–4:30 pm, CST). Have the part number and quantity ready.
Replacement keys may be ordered using the code that appears on the face of the lock.
Not all parts are covered under warranty. Those parts not covered can be purchased.
REF DESCRIPTION PART NUMBER QTY
1SIDE HANDLE ASSEMBLY
1 x Side Handle
4 x M6 Flange Nut
4 x M6 x 12 Hex Bolt
122371 2
2LOCK ASSEMBLY
1 x Lock Body
1 x M18 Hex Nut
1 x Locking Cam
1 x M5 x 6 Screw
122372 1
3 M8 Flange Nut 122373 8
4Rubber Gasket 122374 8
5Metal Washer 122375 8
6 M8 x 16 Hex Bolt 122376 8
7WATER RESISTANT SEAL
For 30" Utility Box
For 36" Utility Box
For 42" Utility Box
For 47" Utility Box
122377
122380
122381
122382
1
8LID STOP
For 30" Utility Box
For 36" Utility Box
For 42" Utility Box
For 47" Utility Box
122378
122383
122384
122385
1
1
2
3
4
5
6
7
8

5
Side Handle Assembly
Includes side handle and hardware
for installing (4 x M6 Flange Nut and
4 x M6 x 12 Hex Bolt)
Lock Assembly
Includes lock body and
hardware for installing
(1 x M18 Hex Nut, 1 x Locking
Cam and 1 x M5 x 6 Screw)
Rubber Gasket
For attaching the feet
Water Resistant Seal
For sealing the lid (pre-installed)
Lid Stop
For securing the lid (pre-installed)
Metal Washer
For attaching the feet
M8 x 16 Hex Bolt
For attaching the feet
M8 Flange Nut
For attaching the feet
2
1
8
1 1
8
8
8

6
A S SE M B LY
Place the bottom panel with the edges facing up, as shown below.
Insert the squares tabs on the right side panel into the corresponding holes in the
back panel. Then, insert the half moon tabs in the front and right side panels into the
corresponding holes in the bottom panel. See illustration below.
Tip: It may be helpful to use a rubber mallet to gently secure the tabs into the holes.
ATTENTION: Make sure the tabs are completely inserted in the holes to prevent them
from coming apart when box is loaded.

7
Repeat to attach the front and left side panels.
Place the lid on the assembled body and press down to attach it to all four of the body
panels. Gently tap the half moon tabs with a rubber mallet until they are fully engaged.
ATTENTION: Make sure the tabs are completely inserted in the holes to prevent them
from coming apart when box is loaded.

8
Attach each side handle using four (4) M6 x 12 hex bolts and M6 flange nuts.
To assemble the lock, place the lock body in the opening on the front of the utility box.
Thread the M18 hex nut onto the lock body, and tighten until the lock is secured against
the front of the utility box. Slip-joint pliers can help tighten the nut into place.
Place the locking cam onto the lock body and secure with the M5 x 6 screw. Tighten
the screw to secure the lock assembly in place, but not so tight that you cannot turn the
locking cam with the key.

9
NOTE: You may need two people to to complete this step with larger utility boxes.
Lay the box on its back with the lid open.
Line up the steel feet with the holes in the bottom panel. Insert the M8 x 16 hex bolts
through the metal washers, the bottom inside of the utility box and then through the steel
feet on the other side of the panel. Secure using the rubber gaskets and M8 flange nuts.

10
MAINTENANCE
Regularly check the swing-up side handles to make sure they are secure.
SAFETY
CAUTION
Make sure the weight of the contents is distributed evenly.
30" UTILITY BOX: The maximum product weight, including contents, is 150 lb (68 kg).
36" UTILITY BOX: The maximum product weight, including contents, is 300 lb (136 kg).
42" UTILITY BOX: The maximum product weight, including contents, is 450 lb (204 kg).
47" UTILITY BOX: The maximum product weight, including contents, is 600 lb (272 kg).

11
This product is warranted to be free from defects in materials
and workmanship for a period of one (1) year from the date
of original purchase.
If this product is defective, email [e-mail]
or call 1-800-459-4409 (Monday–Friday, 8:00 am–4:30 pm, CST). If the
product is defective, we will replace the defective part at no cost to you.
Please do not ship your product back to the store or to us
unless we send you written instructions for return.
In the event it becomes necessary for your product
to be returned, we will notify you how to proceed.
A copy of your original purchase receipt must accompany
the returned product.
1

FORM#: MKDB-04/20
Manufactured by:
QUALITY CRAFT
Romeoville, IL 60446
[e-mail]
1-800-459-4409
(Monday to Friday, 8:00 am–4:30 pm, CST)
Made in China
www.montezumastorage.com