
•Spec
oInput:5V/9V/12V, 15V 2A
oOutput:5V/5W,9V/10W,12V/15W
ooperating frequency:120~130kHz
•How to charge your phone wirelessly with Otto Q
oPlug the supplied USB-C to USB-C cable into Otto Q, then connect to
any USB Type-C wall charger (not included).
oFor optimal performance, use a high-output wall charger (over 10 W, 1
8 W recommended) for better charging efficiency.
oA QuickChargeTM 9V charger is required to enable the fast-charging p
rotocols of Apple (7.5 W) and Samsung (9 W).
•LED behavior:
oOff: Not charging
oBreathing light: Charging
oSteady on: Fully charged
oFlashing: Foreign Object Detection error
•Foreign Object Detection Troubleshooting:
oRemove any metal objects like coins or keys between your device and
Otto Q.
oUnplug the power adapter for Otto Q then plug it in again.
oIf the problem still exists, please contact support@moshi.com.
FCC Statement
Please take attention that changes or modification not expressly approved by
the party responsible for compliance could void the user’s authority to operate the e
quipment.
This device complies with Part 18 of the FCC Rules.