National Cycle ZTechnik VStream R1200RS User manual

Thank you for purchasing a ZTechnik product. Read these instructions carefully and thoroughly before beginning work. Dealers, if installing this wind-
shield for a customer, please give them this manual upon completion. It contains information needed to properly maintain and use this product.
PARTS LIST
ITEM DESCRIPTION QTY.
AVStream Windscreen 1
BAG#1217
B49-495281-000 Bushing, Large, Top 2
C49-495282-000 Bushing, Small, Bottom 2
D51-514119-000 Hex Screw, M5x25, Stainless 2
E51-514142-000 Hex Screw, M5x45, Stainless 2
F34-346048-000 Cap, Black 4
G44-447350-000 Grommet 4
TOOLS REQUIRED
T-25 Torx Wrench
3mm Allen Wrench
PREPARATION
Place motorcycle securely on its centerstand.
OEM WINDSCREEN REMOVAL
Figure 1
With a T-25 Torx Wrench, loosen and remove the four
screws holding the OEM Windscreen to the mounting
bracket. Remove the OEM Windscreen.
OEM hardware will not be reused.
Description: VStream® Replacement Windscreen Model: 2015-20 BMW® R1200RS/R1250RS
Part Number: Z2373Z2374/Z2375 Installation Time: 20 min. Difficulty Level: Easy
ATTENTION: Special notes and cautionary measures
which can prevent damage to the accessory or vehicle.
NOTE: Tips for facilitation of operation, control
and adjustment, as well as maintenance work.
Quantum® Hardcoated Polycarbonate
VStream® Windscreen for:
2015-18/2019-20 BMW® R1200/1250RS
Z2373 Dark Tint, Sport
Z2374 Light Tint, Sport-Tour
Z2375 Clear, Touring VStream® Windscreen Patent No. 7,387,328
ZTechnik by National Cycle, Inc. PO Box 158 Maywood, IL 60153-0158 USA
708-343-0400 / Fax: [phone] www.ztechnik.com e-mail: [email protected]
©2020 National Cycle, Inc. Page 1 of 3 10-118605-000 Rev A 09/20
Figure 1

ZTechnik by National Cycle, Inc. PO Box 158 Maywood, IL 60153-0158 USA
708-343-0400 / Fax: [phone] www.ztechnik.com e-mail: [email protected]
©2020 National Cycle, Inc. Page 2 of 3 10-118605-000 Rev A 09/20
INSTALLATION
Install Grommets and Bushings into Windscreen
Figure 2
Insert one Grommet (G) into each hole in windscreen.
Figure 3
Insert a Large Bushing (B) into each of the two
Grommets in the top two holes of the Windscreen.
Insert a Small Bushing (C) into each of the two Grommets
in the bottom two holes of the Windscreen.
Install Windscreen onto Motorcycle
Figure 4
Secure the Windscreen to the OEM mount points at the
two top hole locations with two Caps (F) and two M5x45
Screws (E).
In the bottom two top hole locations, insert two Caps (F)
and two M5x25 Screws (D).
Using a 3mm Allen Wrench, tighten all four screws
securely but do not overtighten.
Ride safe and enjoy your new VStream Windscreen!
Figure 2
Figure 4
Figure 3

ZTechnik by National Cycle, Inc. PO Box 158 Maywood, IL 60153-0158 USA
708-343-0400 / Fax: [phone] www.ztechnik.com e-mail: [email protected]
©2020 National Cycle, Inc. Page 3 of 3 10-118605-000 Rev A 09/20
CLEANING AND MAINTENANCE
To clean the screen, wash with a clean soft cloth and
plenty of warm water and, if necessary, a non-abrasive
soap such as dishwashing liquid. Flannel or soft chamois
make good cleaning cloths. Paint, glue residue or grease
removal: Moisten cotton wad with naphtha or turpentine
followed by a wash as above.
National Cycle Shield Wash™ (N1401-01) makes a good
daily cleaner and comes with a handy travel-size bottle.
Shield Wash is safe for all windshields and helmet visors
Do not clean polycarbonate in hot sun or high tempera-
tures. Do not clean the screen with household glass
cleaners. Do not allow brake fluid, alcohol, or strong sol-
vents to contact the screen.
RAIN REPELLENT
Do not use rain protective products made for glass. We
recommend National Cycle’s RainZip® (N1410-01) to
keep your windscreen clear in rainy weather.
Register Your Windshield Online at www.nationalcycle.com
ZTechnik by National Cycle 3-Year Limited Warranty
National Cycle hereby warrants to the original registered owner of a National Cycle polycarbonate windshield for a period of
three years from the date of purchase against breakage. This limited warranty is expressly limited to the replacement of the
polycarbonate windscreen. This limited warranty does not include scratches, coating failure, cosmetic wear and tear, replace-
ment of hardware, or any consequential damages or expenses including labor cost of installation, removal and/or replacement,
inconvenience, inbound freight expenses or damage to any other component of the motorcycle or any other accessories.
Certain chemicals, generally known as acidic hydrocarbons, are known to cause polycarbonate damage and will not be cov-
ered under this limited warranty. Please refer to the cleaning instructions supplied with all National Cycle windshields.
Visit www.nationalcycle.com for further details or e-mail National Cycle.
Never ride your motorcycle with loose accessory mounting hardware. Check the hardware for tightness regularly.
Today's motorcycles are built to withstand the moderate loads imposed on them by the foreseeable addition of an accessory(ies). If an
accessory(ies) adversely affects your motorcycle's stability, immediately remove the accessory(ies). Do not ride a motorcycle that exhibits unsafe
handling traits.
Have experienced service personnel correct any problem before riding with the accessory(ies) installed. For further questions concerning handling
problems associated with an accessory(ies), contact your dealer, motorcycle manufacturer, or accessory manufacturer.
Sunlight reflected off the inside curvature of the windscreen can, at certain times of day, cause extreme heat buildup on the motorcycles
instruments and possibly even melt them. Exercise care in parking to avoid this. Park your motorcycle facing the sun or place an opaque
object over this area.
WARNING