NEC N8100-1005F User manual

N8100-1005F
NEC Express5800/110Ei
User's Guide
1st Edition
11-2004
ONL-3125aN-110Ei-100-99-0411

PROPRIETARY NOTICE AND LIABILITY DISCLAIMER
The information disclosed in this document, including all designs and related materials, is the
valuable property of NEC Corporation (NEC) and /or its licensors. NEC and/or its licensors, as
appropriate, reserve all patent, copyright and other proprietary rights to this document, including all
design, manufacturing, reproduction, use, and sales rights thereto, except to the extent said rights are
expressly granted to others.
The NEC product(s) discussed in this document are warranted in accordance with the terms of the
Warranty Statement accompanying each product. However, actual performance of each such
product is dependent upon factors such as system configuration, customer data, and operator control.
Since implementation by customers of each product may vary, the suitability of specific product
configurations and applications must be determined by the customer and is not warranted by NEC.
To allow for design and specification improvements, the information in this document is subject to
change at any time, without notice. Reproduction of this document or portions thereof without
prior written approval of NEC is prohibited.
First Printing, November 2004
Copyright 2004
NEC Corporation
7-1 Shiba 5-Chome, Minato-Ku
Tokyo 108-8001, Japan
All Rights Reserved
Printed in Japan

Keep this manual at hand for quick reference at anytime necessary.
SAFETY INDICATIONS
Follow the instructions in this manual for your safety to use the NEC Express server.
Your server contains components with possible danger, hazards that may cause by ignoring
warnings, and preventive actions against such hazards.
Server components with possible danger are indicated with a warning label placed on or around them
as well as described in this manual.
In this manual or warning labels, "WARNING" or "CAUTION" is used to indicate a degree of danger.
These terms are defined as follows:
WARNING Indicates the presence of a hazard that may result in death or serious
personal injury if the instruction is ignored.
CAUTION Indicates the presence of a hazard that may cause minor personal injury,
including burns, or property damage if the instruction is ignored.
Precautions and notices against hazards are presented with one of the following three symbols. The
individual symbols are defined as follows:
This symbol indicates the presence of a hazard if the instruction is ignored.
An image in the symbol illustrates the hazard type. (Attention)
This symbol indicates prohibited actions. An image in the symbol illustrates a
particular prohibited action. (Prohibited Action)
This symbol indicates mandatory actions. An image in the symbol illustrates a
mandatory action to avoid a particular hazard. (Mandatory Action)
(Example)
Symbol to draw attention
Term indicating a degree of danger
CAUTION
High temperature.
Immediately after the server is powered off, its internal components such as
hard disks are very hot. Leave the server until its internal components fully
cool down before installing/removing any component.
Symbol indicating a prohibited
action (may not always be
indicated)
Description of a danger

SYMBOLS USED IN THIS MANUAL AND WARNING LABELS
Attentions
Indicates that improper use may cause an electric shock.
Indicates that improper use may cause personal injury.
Indicates that improper use may cause fingers to be caught.
Indicates that improper use may cause fumes or fire.
Indicates a general notice or warning that cannot be specifically identified.
Indicates that improper use may cause loss of eyesight due to laser beam.
Prohibited Actions
Indicates a general prohibited action that cannot be specifically identified.
Do not disassemble, repair, or modify the server. Otherwise, an electric shock or fire
may be caused.
Mandatory Action
Unplug the power cord of the server. Otherwise, an electric shock or fire may be
caused.
Indicates a mandatory action that cannot be specifically identified. Make sure to
follow the instruction.

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
CE Statement
Warning: This is a Class A product. In domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures (EN55022).
BSMI Statement

Trademarks
NEC ESMPRO and NEC EXPRESSBUILDER are trademarks of NEC Corporation.
Microsoft, Windows, Windows Server, Windows NT, and MS-DOS are registered trademarks or
trademarks of Microsoft Corporation in the United States and other countries.
Intel and Pentium are registered trademarks of Intel Corporation.
LSI-Logic, MegaRAID, and Power Console Plus are registered trademarks or trademarks of LSI
Logic Corp.
Datalight is a registered trademark of Datalight, Inc.
ROM-DOS is a trademark of Datalight, Inc.
Novell and NetWare are registered trademarks of Novell, Inc. of the United States.
AT is a registered trademark of International Business Machines Corporation in the United States
and other countries.
Adobe, Adobe logo, and Acrobat are trademarks of Adobe Systems Incorporated.
DLT and DLTtape are trademarks of Quantum Corporation of the United States.
All other product, brand, or trade names used in this publication are the trademarks or registered
trademarks of their respective trademark owners.
Windows XP stands for Microsoft® Windows® XP Professional operating system and Microsoft®
Windows® XP Home Edition operating system. Windows 2000 stands for Microsoft®Windows®
2000 Server operating system and Microsoft®Windows®2000 Advanced Server operating system,
and Microsoft®Windows®2000 Professional operating system. Windows 2003 stands for
Microsoft® Windows Server2003 Server operating system and Microsoft® Windows Server
2003 Standard Edition and Enterprise Edition. Windows Me stands for Microsoft®Windows®
Millennium Edition Operating System. Windows 98 stands for Microsoft®Windows®98 operating
system. Windows 95 stands for Microsoft®Windows®95 operating system.
Momentary voltage drop prevention:
This product may be affected by a momentary voltage drop caused by lightning. To prevent a
momentary voltage drop, an AC uninterruptible power supply (UPS) unit should be used.
Notes:
(1) No part of this manual may be reproduced in any form without the prior written permission of
NEC Corporation.
(2) The contents of this manual may be revised without prior notice.
(3) The contents of this manual shall not be copied or altered without the prior written permission
of NEC Corporation.
(4) All efforts have been made to ensure the accuracy of all information in this manual. If you
notice any part unclear, incorrect, or omitted in this manual, contact the sales agent where you
purchased this product.
(5) NEC assumes no liability arising from the use of this product, nor any liability for incidental or
consequential damages arising from the use of this manual regardless of Item (4).

i
PREFACE
Congratulations on the purchase of your NEC Express server.
Purchase of this server is your assurance of receiving state-of-the-art, high quality hardware to meet
your needs, both now and in the future.
Read this User's Guide thoroughly to fully understand handling of the NEC Express server and
appreciate its functions to the maximum extent.

ii
ABOUT THIS USER'S GUIDE
This manual is a guide for proper setup and use of your server.
This manual also covers useful procedures for dealing with difficulties and problems that may arise
during setup or operation of your server.
Keep this manual for future use.
The following describes how to proceed with this manual.
How to Use This Manual
To aid you in finding information quickly, this manual contains the following information:
Chapter 1 Notes on Using Your Server
includes information that needs attention to use the server. Make sure to read this chapter
before setting up and using the server. It also includes requirements and advisory information
for transfer and disposal of the server.
Chapter 2 General Description
includes information necessary to use the server, such as names and functions of its
components, handling of the floppy disk and CD-ROM drives.
Chapter 3 Setting Up Your Server
tells you how to select a site, unpack the system, make cable connections, and power on your
system.
Chapter 4 Configuring Your Server
tells you how to configure the system and provides instructions for running the BIOS Setup Utility.
This chapter also provides information on mother board jumper settings.
Chapter 5 Installing the Operating System with Express Setup
describes how to install the operating system.
Chapter 6 Installing and Using Utilities
describes how to install the utilities for the server. It also includes a description on using the
attached "NEC EXPRESSBUILDER" CD-ROM.
Chapter 7 Maintenance
provides you with all the information necessary to maintain successful operation of the server.
This chapter also includes a description on relocating and storing the server.
Chapter 8 Troubleshooting
contains helpful information for solving problems that might occur with your system.
Chapter 9 Upgrading Your Server
provides you with instructions for upgrading your system with an additional processor, optional
memory, optional add-in cards, hard disk drives, peripheral devices, and power supply.
Chapter 10 Internal Cabling Diagram
includes cabling information for the three onboard IDE controller, the optional RAID controller,
and the power supply.
Appendix A Specification
provides specifications for your server.
Appendix B Other Precautions
provides supplementary notes on using the server.

iii
Appendix C IRQ and I/O Port Address
provides a list of factory-set IRQs and I/O port addresses assigned.
Appendix D Installing Windows Server 2003
describes how to install Microsoft Windows Server 2003 without using Express Setup. Using
the Express Setup tool is recommended for installing Windows Server 2003. See Chapter 5 for
details.
Appendix E Installing Windows 2000
describes how to install Microsoft Windows 2000 without using Express Setup. Using the
Express Setup tool is recommended for installing Windows 2000. See Chapter 5 for details.
Appendix F Product Configuration Record Table
provides a table to be filled with your server configuration.
Text Conventions
The following conventions are used throughout this manual. For safety symbols, see "SAFETY
INDICATIONS" provided earlier.
IMPORTANT: Items that are mandatory or require attention when using the server
NOTE: Helpful and convenient piece of information
IN THE PACKAGE
The carton contains various accessories, as well as the server itself. See the packing list to make
sure that you have everything and that individual components are not damaged. If you find any
component missing or damaged, contact your sales agent.
Store the provided accessories in a designated place for your convenience. You will need
them to install an optional device or troubleshoot your server, as well as to set it up.
Make a backup copy of each provided floppy disk, if any. Store the original disk as the
master disk in a designated place, and use its copy.
Improper use of any provided floppy disk or CD-ROM may alter your system
environment. If you find anything unclear, immediately ask your sales agent for help.

iv
CONTENTS
Preface ..............................................................................................................................................i
About This User's Guide..................................................................................................................ii
In the Package.................................................................................................................................iii
Chapter 1 Notes on Using Your Server........................................................................ 1-1
Warning Labels.............................................................................................................................1-2
Safety Notes..................................................................................................................................1-3
General .....................................................................................................................................1-3
Power Supply and Power Cord Use .........................................................................................1-4
Installation, Relocation, Storage, and Connection....................................................................1-5
Cleaning and Working with Internal Devices...........................................................................1-6
During Operation .....................................................................................................................1-7
For Proper Operation ....................................................................................................................1-8
Transfer to Third Party .................................................................................................................1-9
Disposal and Consumables .........................................................................................................1-10
User Support...............................................................................................................................1-11
Chapter 2 General Description ..................................................................................... 2-1
Overview ......................................................................................................................................2-2
System Chassis .............................................................................................................................2-3
Front View................................................................................................................................2-3
Rear View.................................................................................................................................2-5
Internal View ............................................................................................................................2-7
Mother Board................................................................................................................................2-8
Standard Features .........................................................................................................................2-9
Power Supply .........................................................................................................................2-10
Peripheral Bays ......................................................................................................................2-10
Remote Power-On Feature (Wake On LAN)..........................................................................2-10
AC LINK Feature...................................................................................................................2-11
Security ..................................................................................................................................2-11
NEC EXPRESSBUILDER ....................................................................................................2-11
NEC ESMPRO.......................................................................................................................2-12
Off-line Maintenance Utility ..................................................................................................2-12
System Diagnostic Utility ......................................................................................................2-12
Using Your Server.......................................................................................................................2-13
POWER Switch......................................................................................................................2-13
SLEEP Switch ........................................................................................................................2-17
Floppy Disk Drive..................................................................................................................2-18
CD-ROM Drive......................................................................................................................2-20

v
Chapter 3 Setting Up Your Server ................................................................................ 3-1
Setup Flow....................................................................................................................................3-2
UNPACKING THE SYSTEM......................................................................................................3-3
Installing Optional Devices ..........................................................................................................3-3
Selecting Server Site.....................................................................................................................3-4
Connecting Peripheral Devices.....................................................................................................3-6
Connecting Power Cord................................................................................................................3-8
Turning On the Server ................................................................................................................3-10
Installing Operating System .......................................................................................................3-12
Installing Utilities .......................................................................................................................3-12
Making Backup Copies of System Information..........................................................................3-12
Chapter 4 Configuring Your Server.............................................................................. 4-1
System BIOS (BIOS Setup Utility) ..............................................................................................4-2
Starting SETUP Utility.............................................................................................................4-3
Description on On-Screen Items and Key Usage .....................................................................4-4
Configuration Examples...........................................................................................................4-5
Menu and Parameter Descriptions ...........................................................................................4-9
Add-in Card's BIOS....................................................................................................................4-28
Configuring Mother Board Jumpers ...........................................................................................4-29
RAID Configuration Utility........................................................................................................4-31
Installing the Hard Disk Drives..............................................................................................4-31
Activating the SATA RAID Feature .......................................................................................4-31
Running the Array Configuration Utility (ACU) ...................................................................4-32
Using the Array Configuration Utility....................................................................................4-33
Chapter 5 Installing the Operating System with Express Setup............................... 5-1
About Express Setup ....................................................................................................................5-2
Microsoft Windows Server 2003 ..................................................................................................5-4
Installation Notice ....................................................................................................................5-4
The Flow of Setup....................................................................................................................5-7
Installing and Setting Device Drivers.....................................................................................5-12
Setting for Solving Problems .................................................................................................5-17
Installing Maintenance Utilities .............................................................................................5-20
Updating the System ..............................................................................................................5-21
Making Backup Copies of System Information .....................................................................5-21
Exceptional Setup...................................................................................................................5-22
Microsoft Windows 2000 ...........................................................................................................5-23
Installation Notice ..................................................................................................................5-23
The Flow of Setup..................................................................................................................5-26
Installing and Setting Device Drivers.....................................................................................5-31
Setting for Solving Problems .................................................................................................5-35
Installing Maintenance Utilities .............................................................................................5-38
Updating the System - Installing Service Pack - ....................................................................5-39
Making Backup Copies of System Information .....................................................................5-39
Exceptional Setup...................................................................................................................5-40

vi
HostRAID...................................................................................................................................5-41
Overview of HostRAID .........................................................................................................5-41
Notes ......................................................................................................................................5-42
HostRAID Setup Flow ...........................................................................................................5-43
Chapter 6 Installing and Using Utilities ....................................................................... 6-1
NEC EXPRESSBUILDER...........................................................................................................6-2
NEC EXPRESSBUILDER for DOS-Based with Local Console.............................................6-4
NEC EXPRESSBUILDER for Windows-Based (Master Control Menu)................................6-9
Configuration Diskette Creator...................................................................................................6-10
NEC ESMPRO ...........................................................................................................................6-13
Functions and Features...........................................................................................................6-13
Adaptec Storage Manager- Browser Edition..........................................................................6-14
Promise Array Management .......................................................................................................6-15
Power Console Plus ....................................................................................................................6-16
Major Functions .....................................................................................................................6-16
Components............................................................................................................................6-16
Server Setup ...........................................................................................................................6-18
Management PC Setup ...........................................................................................................6-19
Chapter 7 Maintenance.................................................................................................. 7-1
Making Backup Copies ................................................................................................................7-1
Cleaning........................................................................................................................................7-2
Cleaning the Server ..................................................................................................................7-3
Cleaning the Interior.................................................................................................................7-4
Cleaning the Keyboard/Mouse.................................................................................................7-5
Cleaning CD-ROM ..................................................................................................................7-6
System Diagnostics.......................................................................................................................7-7
Test Items .................................................................................................................................7-7
Starting and Ending the System Diagnostics............................................................................7-8
Relocating/Storing The Server....................................................................................................7-11
Chapter 8 Troubleshooting ........................................................................................... 8-1
System Viewers ............................................................................................................................8-2
Lamps ...........................................................................................................................................8-3
POWER/SLEEP Lamp.............................................................................................................8-4
DISK ACCESS Lamp ..............................................................................................................8-4
Access Lamps...........................................................................................................................8-4
LINK/ACT Lamp.....................................................................................................................8-4
1000/100/10 Lamp ...................................................................................................................8-5
Hard Disk Drive Lamp (DISK Lamp)......................................................................................8-5
Error Messages .............................................................................................................................8-7
Error Messages after Power-on ................................................................................................8-7
POST Error Messages ..............................................................................................................8-8
Beep Codes.............................................................................................................................8-10

vii
Solving Problems........................................................................................................................8-11
Problems with NEC Express Server.......................................................................................8-11
Problems with Windows Server 2003 ....................................................................................8-15
Problems with Windows Server 2003 and Windows 2000.....................................................8-15
Problems with NEC EXPRESSBUILDER ............................................................................8-18
Problems with Express Setup .................................................................................................8-19
Problems with Disk Array Configuration...............................................................................8-21
Problems with Master Control Menu .....................................................................................8-22
Collecting Event Log .............................................................................................................8-22
Collect Configuration Information.........................................................................................8-23
Collecting Dr. Watson Diagnostic Information ......................................................................8-24
Memory Dump .......................................................................................................................8-24
Recovery for Windows 2000 System..........................................................................................8-25
Off-line Maintenance Utility ......................................................................................................8-28
Starting the Off-line Maintenance Utility...............................................................................8-28
Features of Off-line Maintenance Utility ...............................................................................8-29
Resetting the Server....................................................................................................................8-30
Forced Shutdown........................................................................................................................8-30
Chapter 9 Upgrading Your Server ................................................................................ 9-1
Safety Notes..................................................................................................................................9-2
Static Precautions .........................................................................................................................9-3
Preparing for Installation and Removal........................................................................................9-4
Installation or Removal Procedure ...............................................................................................9-5
Side Cover................................................................................................................................9-5
Front Mask ...............................................................................................................................9-9
3.5-inch Hard Disk Drive .......................................................................................................9-11
PCI Board...............................................................................................................................9-19
DIMM ....................................................................................................................................9-30
File Device .............................................................................................................................9-34
5-inch File Device Bay...........................................................................................................9-40
Hot-swap SCSI Hard Disk Drive Cage ..................................................................................9-46
Chapter 10 Internal Cabling Diagrams....................................................................... 10-1
Interface Cables ..........................................................................................................................10-2
Addition of Hard Disk............................................................................................................10-2
Connection of Disk Array Controller (SATA)........................................................................10-4
Connection of Disk Array Controller (SCSI) .........................................................................10-6
Connection of 5.25-inch Device.............................................................................................10-8
Power Cables ............................................................................................................................10-13

viii
Appendix A Specifications............................................................................................A-1
Appendix B Other Precautions.....................................................................................B-1
Transfer Rate of the On-board LAN Controller ...................................................................... B-1
Server Management Software .................................................................................................B-1
Floppy Disk............................................................................................................................. B-1
CD-ROM................................................................................................................................. B-4
Tape Media.............................................................................................................................. B-4
Keyboard ................................................................................................................................. B-5
Mouse...................................................................................................................................... B-6
Appendix C IRQ and I/O Port Address.........................................................................C-1
Appendix D Installing Windows Server 2003 ..............................................................D-1
Before Installing Windows Server 2003......................................................................................D-1
Optional Board Supported by NEC EXPRESSBUILDER......................................................D-1
Installing Service Pack ............................................................................................................D-1
Updating System .....................................................................................................................D-1
Re-installing to the Hard Disk which has been upgraded to Dynamic Disk ...........................D-2
Manual Installation when N8103-65F/80F Keeps Connection ...............................................D-2
MO Device..............................................................................................................................D-2
Media such as DAT .................................................................................................................D-2
Partition Size ...........................................................................................................................D-3
Installing Windows Server 2003..................................................................................................D-4
Creating "Windows Server 2003 OEM-DISK for NEC EXPRESSBUILDER" .....................D-4
Windows Server 2003 Clean Installation ................................................................................D-6
Upgrade Installation ................................................................................................................D-8
Reinstallation to Multiple Logical Drives .............................................................................D-10
Updating the System .............................................................................................................D-12
Driver Installation and Advanced Settings ................................................................................D-13
PROSet..................................................................................................................................D-13
Network Driver .....................................................................................................................D-14
Re-install the Network Driver ...............................................................................................D-15
Graphics Accelerator Driver..................................................................................................D-15
Installing SCSI Controller Driver..........................................................................................D-16
Setting for Collecting Memory Dump (Debug Information)..................................................D-16

ix
Appendix E Installing Windows 2000 .......................................................................... E-1
Before Installing Windows 2000 ................................................................................................. E-1
Optional Board Supported by NEC EXPRESSBUILDER...................................................... E-1
Installing Service Pack ............................................................................................................ E-1
Updating System ..................................................................................................................... E-1
Re-installing to the Hard Disk which has been upgraded to Dynamic Disk ........................... E-2
MO Device.............................................................................................................................. E-2
Media such as DAT ................................................................................................................. E-2
Partition Size ........................................................................................................................... E-3
Installing Windows 2000 ............................................................................................................. E-4
Creating "Windows 2000 OEM-DISK for NEC EXPRESSBUILDER"................................. E-4
Windows 2000 Clean Installation............................................................................................ E-6
Reinstallation to Multiple Logical Drives ............................................................................... E-7
Updating the System - Installing Service Pack - ..................................................................... E-9
Driver Installation and Advanced Settings ................................................................................ E-10
PROSet.................................................................................................................................. E-10
Network Driver ..................................................................................................................... E-11
Re-install the Network Driver ............................................................................................... E-12
Graphics Accelerator Driver.................................................................................................. E-13
USB 2.0 Driver...................................................................................................................... E-13
Installing SCSI Controller Driver.......................................................................................... E-14
Setting for Collecting Memory Dump (Debug Information).................................................. E-14
Appendix F Product Configuration Record Table ...................................................... F-1
Hardware................................................................................................................................. F-1
Software .................................................................................................................................. F-3

x
(This page is intentionally left blank.)

Chapter 1
Notes on Using Your Server
This chapter includes information necessary for proper and safe operation of your server.

1-2 Notes on Using Your Server
WARNING LABELS
The warning label is attached to components with possible danger or their vicinity in your server to
inform the user that a hazardous situation may arise when operating the server. (Do not
intentionally remove or damage any of the labels.)
If you find any labels totally/partially removed or illegible due to damage, contact your sales
representative.

Notes on Using Your Server 1-3
SAFETY NOTES
This section provides notes on using your server safely. Read this section carefully to ensure
proper and safe use of the server. For symbols, see "SAFETY INDICATIONS" provided earlier.
General
WARNING
Do not use the server for services where critical high availability may directly
affect human lives.
Your server is not intended to be used with or control facilities or devices
concerning human lives, including medical devices, nuclear facilities and
devices, aeronautics and space devices, transportation facilities and devices;
and facilities and devices requiring high reliability. NEC assumes no liability for
any accident resulting in personal injury, death, or property damage if the server
has been used in the above conditions.
Do not use the server if any smoke, odor, or noise is present.
If smoke, odor, or noise is present, immediately turn off the server and
disconnect the power plug from the outlet, then contact your sales agent.
Using the server in such conditions may cause a fire.
Keep needles or metal objects away from the server.
Do not insert needles or metal objects into ventilation holes in the server or
openings in the floppy disk or CD-ROM drive. Doing so may cause an electric
shock.
CAUTION
Keep water or foreign matter away from the server.
Do not let any form of liquid (water etc.) or foreign matter (e.g., pins or paper
clips) enter the server. Failure to follow this warning may cause an electric
shock, a fire, or a failure of the server. When such things accidentally enter the
server, immediately turn off the power and disconnect the power plug from the
outlet. Do not disassemble the server. Contact your sales agent.

1-4 Notes on Using Your Server
Power Supply and Power Cord Use
WARNING
Do not hold the power plug with a wet hand.
Do not disconnect/connect the plug while your hands are wet. Failure to follow
this warning may cause an electric shock.
CAUTION
Plug in to a proper power source.
Use a proper wall outlet. Use of an improper power source may cause a fire or
a power leak.
Do not install the server where you need an extension cord. Use of a cord that
does not meet the power specifications of your server may heat up the cord and
cause a fire.
Do not connect the power cord to an outlet that has an illegal number of
connections.
The electric current exceeding the rated flow overheats the outlet, which may
cause a fire.
Do not pull the cable when disconnecting it.
When disconnecting the cable from the device, hold the cable connector and
pull it straight out. Pulling the cable out by the cable portion or giving mechanical
stress to the connector could damage the cables and connectors to result in an
electrical shock hazard or a fire.
Insert the power plug into the outlet as far as it goes.
Heat generation resulting from a halfway inserted power plug (imperfect contact)
may cause a fire. Heat will also be generated if condensation is formed on
dusty blades of the halfway inserted plug, increasing the possibility of fire.
Use the authorized power cord only.
Use only the power cord that comes with your server. Use of an unauthorized
power cord may cause a fire when the electric current exceeds the rated flow.
Also, observe the following to prevent an electric shock or fire caused by a
damaged cord.
 Do not stretch the cord harness.
 Do not pinch the power cord.
 Do not bend the power cord.
 Keep chemicals away from the power cord.
 Do not twist the power cord.
 Do not place any object on the power cord.
 Do not bundle power cords.
 Do not alter, modify, or repair the power cord.
 Do not secure the power cord with staples or equivalents.
 Do not use any damaged power cord. (Replace a damaged power cord with
a new one of the same specifications. Ask your sales agent for
replacement.)