NEC ElectraElite IPK User manual

Notice
Note that when converting this document from its original format to a .pdf file,
some minor font and format changes may occur causing slight variations from the
original printed document. When viewing and printing this document, we cannot
guarantee that your specific PC or printer will support all of the fonts or graphics.
Therefore, when you view the document, fonts may be substituted and your
individual printer may not have the capability to print the document correctly.

P
ROGRAMMING
M
ANUAL
Stock Number 750825
Document Revision 1
(Release 1000)

NEC America, Inc. reserves the right to change the specifications, functions, or features at
any time without notice.
NEC America, Inc. has prepared this document for use by its employees and customers. The
information contained herein is the property of NEC America, Inc. and shall not be
reproduced without prior written approval of NEC America, Inc.
Dterm is a registered trademark of NEC Corporation and Electra Elite is a registered
trademarks of NEC America, Inc. Windows is a registered trademark of Microsoft
Corporation. AT&T is a registered trademark of American Telephone and Telegraph
Company. Lucent Technologies is a trademark or service mark of Lucent Technologies Inc.
Nortel Networks and the Nortel Networks logo are trademarks of Nortel Networks.
Copyright 2003
NEC Infrontia, Inc.
6535 N. State Highway 161
Irving, TX 75039-2402
Technology Development

Programming Manual i
___________________________________________________________________________________
___________________________________________________________________________________
PREFACE
SECTION 1ABOUT THIS MANUAL
The Programming Manual provides the technician with all of the necessary
information for programming the Elite IPK system.
Programming can be accomplished using a PC or a Multiline Terminal.
SECTION 2MANUAL ORGANIZATION
This manual provides instructions for programming the Elite IPK system.
Chapter 1 – Multiline Terminal Programming
This chapter includes the basic information for programming the system.
Chapter 2 – Memory Blocks
This chapter includes all of the Memory Blocks used to program the system. Detailed
programming instructions are provided for each Memory Block.
Chapter 3 – Advanced Applications
This chapter includes information for code restrictions, Automatic Route Selection
(ARS) and ISDN-PRI Call-by-Call.
Appendices
The appendices include the function time chart, character codes and the display
abbreviations.

___________________________________________________________________________________
Document Revison 1 Elite IPK
ii Preface
___________________________________________________________________________________
SECTION 3SUPPORTING DOCUMENTS
A set of manuals for the Electra Elite system provides all the information necessary to
install and support the system. Other manuals included in the set are described
below.
This manual provides detailed information related to every feature available in the
system.
Electra Elite IPK General Description Manual
This manual provides general information about the system features, configuration,
and standards. An overview of the Elite IPK system that is useful when presenting
information to potential customers is provided.
Electra Elite IPK System Hardware Manual
The System Hardware Manual is intended for the system installer and provides
detailed instructions for installing the Elite IPK KSU, ETUs, Multiline Terminals, and
optional equipment.
Electra Elite IPK Least Cost Routing Manual
This manual provides instructions to the service technician for programming the
customer site for least cost routing.
Electra Elite IPK Automatic Call Distribution Manual
This manual provides the service technician with instructions for programming the
ACD. This manual can also be used by the ACD supervisor at the customer site to
become familiar with the ACD/MIS feature.
Electra Elite IPK Job Specifications Manual
This manual is intended to help the technician install and maintain the Electra Elite
system. Job specification worksheets are provided. When these worksheets are
completed, they provide all of the system programming values and configuration
information necessary to help technicians maintain the system.

Elite IPK Document Revison 1
Programming Manual iii
___________________________________________________________________________________
___________________________________________________________________________________
Electra Elite IPK ACD Plus Installation Manual
This manual provides general information about the ElectraElite IPK ACD Plus
features, installation procedures and feature programming. The NEC Electra Elite IPK
ACD Plus is an Automatic Call Distribution card that supports up to 40 Agents and 12
supervisors at one time.
Electra Elite IPK Wireless System Manual
This manual describes the system and provides hardware installation and
programming procedures for the Electra Elite IPK Wireless Communication System
(WCS).

___________________________________________________________________________________
Document Revison 1 Elite IPK
iv Preface
___________________________________________________________________________________
THIS PAGE INTENTIONALLY LEFT BLANK

Programming Manual i
___________________________________________________________________________________
___________________________________________________________________________________
TABLE OF CONTENTS
Chapter 1 Multiline Terminal Programming
Section 1 General Information ............................................................................ 1-1
Section 2 Programming the System ................................................................... 1-1
2.1 Features of Programming ................................................................ 1-2
2.2 System Programming Modes ............................................... 1-3
2.3 Before Programming ............................................................ 1-4
2.3.1 Check Points ....................................................................... 1-4
2.3.2 Preliminary Points ................................................................ 1-4
2.4 Writing System Data ............................................................. 1-5
2.5 Programming Methods ......................................................... 1-6
2.5.1 Initializing the System .......................................................... 1-6
2.5.2 Using the Multiline Terminal for Programming .................... 1-6
2.5.3 Entering Programming Mode ............................................... 1-8
2.5.4 Page Switching .................................................................... 1-9
2.5.5 Station Port Numbering Plan ............................................. 1-11
Section 3 System Data List ................................................................................ 1-12
Chapter 2 Memory Blocks
Section 1 Programming System Data Using the Memory Block ...................... 2-1
1-1-00 Pause Time Selection .................................................................................2-2
1-1-01 DP Interdigit Time Selection ........................................................................2-3
1-1-02 Hookflash Time Selection ............................................................................2-4
1-1-03 Hold Recall Time Selection (Non-Exclusive Hold) ......................................2-6
1-1-04 Automatic Redial Time Selection................................................................2-7

ii Table of Contents
___________________________________________________________________________________
___________________________________________________________________________________
Document Revision 1 Elite IPK
1-1-05 Start Time Selection ....................................................................................2-8
1-1-06 CO/PBX Incoming Ringing Alarm Time Selection .......................................2-9
1-1-07 Tie Line Delay Ringing Time Selection .....................................................2-11
1-1-09 Manual Pause Selection ...........................................................................2-13
1-1-11 System Transfer/Camp-On Selection .......................................................2-15
1-1-12 Station Transfer/Camp-On Recall Time Selection ....................................2-16
1-1-13 CO Transfer Ring Pattern Selection ..........................................................2-17
1-1-14 CO Transfer Ring Tone Selection .............................................................2-19
1-1-18 System Speed Dial Restriction by Tenant .................................................2-20
1-1-20 DID Digit Length Selection ........................................................................2-23
1-1-21 DID Digit Conversion Assignment .............................................................2-24
1-1-22 DID Digit Conversion Table .......................................................................2-25
1-1-23 DID Forward Station Number for Busy Station or Undefined Digit ............2-27
1-1-24 PBX/CTX Access Code Assignment I .......................................................2-29
1-1-25 PBX/CTX Access Code Assignment II ......................................................2-31
1-1-27 Automatic Day/Night Mode Switching Time Assignment ..........................2-33
1-1-28 Distinctive Ringing by Telephone or CO Selection ...................................2-35
1-1-29 Private Line Assignment ...........................................................................2-36
1-1-30 Route Advance Block Assignment ............................................................2-37
1-1-32 Automatic Day/Night Mode by Day of Week Selection .............................2-39
1-1-33 Speed Dial Number/Name Display Selection ............................................2-41
1-1-34 Tie Line First Ring Pattern Selection .........................................................2-42
1-1-35 Speed Dial Buffer Allocation .....................................................................2-44
1-1-37 Trunk Queuing Timeout Selection .............................................................2-45
1-1-46 Access Code (1-Digit) Assignment ...........................................................2-46
1-1-47 Access Code (2-Digit) Assignment ...........................................................2-51
1-1-48 Access Code (3-Digit) Assignment ...........................................................2-52
1-1-49 Networking Trunk Group/Route Advance Assignment ..............................2-54
1-1-50 CO/PBX Outgoing Digit Add Assignment ..................................................2-55
1-1-51 CO Line Ringing Pattern Selection ...........................................................2-57
1-1-52 PBX Line Ringing Pattern Selection ..........................................................2-59
1-1-53 Tie Line Delay Ring Pattern Selection ......................................................2-61

Elite IPK Document Revision 1
Programming Manual iii
___________________________________________________________________________________
___________________________________________________________________________________
1-1-54 Automated Attendant Transfer Ring Pattern .............................................2-63
1-1-55 DID Line Ringing Pattern Selection ...........................................................2-65
1-1-57 CO/PBX Prepause Time Selection ............................................................2-66
1-1-59 Synchronous Ringing Selection ................................................................2-67
1-1-60 8-Digit Matching Table Assignment ...........................................................2-68
1-1-61 8-Digit Matching Table to Class Assignment .............................................2-70
1-1-62 System Speed Dial Override by Class Selection ......................................2-72
1-1-63 Hold Recall Time Selection (Exclusive) .....................................................2-73
1-1-64 Attendant Add-On Console Transfer/Camp-On Recall Time Selection .....2-74
1-1-65 Code Restriction Class Allow/Deny Selection ...........................................2-76
1-1-66 8-Digit Matching Table to Normal Dial Assignment ...................................2-77
1-1-67 OCC Table Assignment .............................................................................2-78
1-1-68 8-Digit Matching Table to OCC Table Assignment ....................................2-79
1-1-69 Tie Line Code Restriction Assignment ......................................................2-80
1-1-70 Code Restriction Class Assignment When Lockout is Set ........................2-81
1-1-71 First Delay Announcement Start Time Selection .......................................2-82
1-1-72 First Delay Announcement Repeat Selection ............................................2-83
1-1-73 First to Second Delay Announcement Interval Time Selection .................2-84
1-1-74 Second Delay Announcement Repeat Selection ......................................2-85
1-1-75 Second Delay Announcement Repeat Interval Time Selection .................2-86
1-1-76 Barge-In Alert Tone Assignment ...............................................................2-87
1-1-77 Delayed Ringing Time Assignment (CO) ..................................................2-88
1-1-78 Caller ID Display Assignment for System Mode ........................................2-89
1-1-79 BGM Port Assignment ...............................................................................2-90
1-1-80 ISDN DTMF Duration/Interdigit Selection ..................................................2-91
1-1-81 ISDN Dial Interval Time Selection .............................................................2-92
1-1-82 CO Feature Code Service for Code Restriction ........................................2-93
1-2-00 Internal Paging Timeout Selection ............................................................2-95
1-2-01 Intercom Call Voice/Tone Signal Selection ...............................................2-96
1-2-02 Automatic Callback Release Time Selection .............................................2-97
1-2-03 2-, 3-, or 4-Digit Station Number Selection ................................................2-98
1-2-04 Call Arrival Key Block Assignment ............................................................2-99

iv Table of Contents
___________________________________________________________________________________
___________________________________________________________________________________
Document Revision 1 Elite IPK
1-2-08 Specified Station Access Code Assignment ...........................................2-101
1-2-09~18 Customized Message 1~10 Assignment .................................................2-103
1-2-19 Intercom Ring Pattern Selection .............................................................2-104
1-2-20 Intercom Ring Tone Selection .................................................................2-106
1-2-21 PS Telephone Block Assignment ............................................................2-107
1-2-22 Call Forward - No Answer Time Selection ..............................................2-109
1-2-23 System Call Park Recall Time Selection .................................................2-110
1-2-24 Intercom Feature Access Code Assignment ...........................................2-111
1-2-25 Internal Paging Alert Tone Selection .......................................................2-113
1-2-26 Delayed Ringing Time Assignment (ICM) ...............................................2-114
1-2-30 PS Out of Area Time Assignment ...........................................................2-115
1-2-32 IP Phone Block Assignment ....................................................................2-116
1-3-01 Bounce Protect Time Selection ...............................................................2-119
1-3-02 SLT Hookflash Signal Selection ..............................................................2-120
1-3-03 First Digit PBR Release Time Selection ..................................................2-121
1-3-04 Dial 1 (DP) Hookflash Selection ..............................................................2-122
1-3-05 Hookflash Start Time Selection ...............................................................2-123
1-3-06 Hookflash End Time Selection ................................................................2-124
1-3-07 Voice Mail Digit Add Assignment ............................................................2-125
1-3-08 Voice Mail DTMF Delay Time Selection ..................................................2-126
1-3-09 Voice Mail Disconnect Time Selection ....................................................2-127
1-3-10 Voice Mail DTMF Duration/Interdigit Time Selection ..............................2-128
1-4-00 Tandem Transfer Automatic Disconnect Time Selection ........................2-129
1-4-01 Automated Attendant First Digit PBR Release Time Selection ...............2-130
1-4-02 Automated Attendant Transfer Delayed Ringing Time Selections ..........2-131
1-4-03 Automated Attendant No Answer Disconnect Time Selection ................2-133
1-4-04 Tandem Transfer SMDR Print Extension Assignment ............................2-134
1-4-05 Automatic Tandem Trunk by Night Mode Selection ................................2-135
1-4-08 Automated Attendant PBR Timeout Response Selection .......................2-136
1-4-09 Automated Attendant PBR Start Time Selection .....................................2-137
1-4-11 Automated Attendant Message Day/Night Mode Selection ....................2-138
1-4-12 Automated Attendant Message to Tenant Assignment ...........................2-139

Elite IPK Document Revision 1
Programming Manual v
___________________________________________________________________________________
___________________________________________________________________________________
1-4-13 Automated Attendant Answer Delay Time Assignment ...........................2-140
1-4-14 Automated Attendant Message Access Code (1-Digit) Assignment .......2-141
1-4-15 Automated Attendant Message Access Code (2-Digit) Assignment .......2-144
1-4-16 Automated Attendant Message Repeat Selection ...................................2-145
1-4-17 Automated Attendant Delay Announcement Hold Tone Selection ..........2-146
1-4-18 Automated Attendant Delay Announcement Assignment .......................2-147
1-4-19 Automated Attendant 1st to 2nd Delay Announcement
Interval Time Selection ............................................................................2-148
1-4-20 Automated Attendant Delay Announcement Disconnect
Time Selection ........................................................................................2-149
1-4-21 Automated Attendant Extension Number Assignment ............................2-150
1-4-22 Automated Attendant Direct Extension Ring Assignment .......................2-151
1-5-02 SMDR Print Format ................................................................................2-153
1-5-13 Printer Connected Selection ...................................................................2-154
1-5-14 Printer Line Feed Control Selection ........................................................2-155
1-5-25 SMDR Valid Call Time Assignment .........................................................2-157
1-5-26 SMDR Incoming/Outgoing Print Selection ..............................................2-158
1-6-01 Attendant Add-On Console to Telephone Port Assignment ....................2-159
1-6-03 DSS Call Voice/Tone Signal Selection ....................................................2-160
1-6-05 Attendant Add-On Console Key Selection ..............................................2-161
1-6-07 Message Board Lamp Assignment .........................................................2-164
1-6-08 Attendant Transfer Selection During Live Record ...................................2-165
1-7-00 Doorphone Assignment ...........................................................................2-167
1-7-01 Doorphone Display Time Selection .........................................................2-168
1-7-02 External Speaker Connection Selection ..................................................2-169
1-7-03 External Paging Alert Tone Selection ......................................................2-170
1-7-04 Doorphone Ring Pattern Selection ..........................................................2-171
1-7-05 Doorphone Ringing Frequency Selection ................................................2-173
1-7-06 External Paging Timeout Selection .........................................................2-175
1-7-07 External Ring Relay Pattern Selection ....................................................2-176
1-7-08 External Speaker Chime Selection ..........................................................2-178
1-7-09 External Speaker Chime Start Time Selection ........................................2-179
1-8-01 SLT or Automated Attendant/DISA to CPU PBR Selection .....................2-181

vi Table of Contents
___________________________________________________________________________________
___________________________________________________________________________________
Document Revision 1 Elite IPK
1-8-02 PBR Receive Level Assignment for Automated Attendant/DISA ............2-182
1-8-04 Time Display (12h/24h) Selection ...........................................................2-184
1-8-07 Class of Service (Attendant) Feature Selection 1 ...................................2-185
1-8-08 Class of Service (Station) Feature Selection 2 .......................................2-188
1-8-09 Music on Hold Pattern Selection .............................................................2-193
1-8-10 PBR Interdigit Release Time Selection ...................................................2-194
1-8-11 System Refresh Time Assignment ..........................................................2-196
1-8-12 VRS Message Recording Time Selection ...............................................2-197
1-8-13 VRS Message Function Assignment .......................................................2-198
1-8-15 Tone Assignment ....................................................................................2-200
1-8-16 Voice Prompt to Tone Assignment ..........................................................2-203
1-8-17 PC Programming Password Assignment ................................................2-204
1-8-18 Site Name Assignment ............................................................................2-205
1-8-25 ACD/UCD Group Agent Assignment .......................................................2-206
1-8-26 Voice Mail Quick Transfer Master Hunt Number .....................................2-207
1-8-27 Forced Account Code/Authorization Code Length Assignment ..............2-209
1-8-29 SCD (Simplified Call Distribution) Pilot Number Assignment ..................2-211
1-8-30 SCD Group Agent Assignment ...............................................................2-212
1-8-31 Hold Tone Source Assignment ...............................................................2-213
1-8-32 Hold Internal Tone Volume Selection ......................................................2-214
1-8-33 Master Clock Selection ...........................................................................2-215
1-8-35 COM Port Baud Rate Setting Assignment ..............................................2-217
1-8-36 COM Port Parity/Stop Bit Setting Assignment ........................................2-218
1-8-37 General Purpose Relay Assignment .......................................................2-219
1-8-38 Modem Number For Remote Programming Assignment ........................2-220
1-8-40 ACD Hunt Time .......................................................................................2-221
1-8-43 Enhanced 911 Trunk Assignment ...........................................................2-222
1-8-44 Enhanced 911 Alternate Route Assignment ...........................................2-224
1-8-45 Enhanced 911 Alternate Route Assignment (Maintenance Busy) ..........2-225
1-8-46 Enhanced 911 Dialing Digit Assignment .................................................2-227
1-8-47 Call Arrival Key Voice Mail Message Notification Assignment ................2-228
1-8-48 Automatic Daylight Saving Time Selection .............................................2-229

Elite IPK Document Revision 1
Programming Manual vii
___________________________________________________________________________________
___________________________________________________________________________________
1-9-00 DISA ID Code Assignment ......................................................................2-231
1-9-02 DISA Password Effect/Invalid Selection ..................................................2-232
1-10-00 Call by Call Type of Network ID Assignment ...........................................2-233
1-10-01 Call by Call ID Plan Assignment..............................................................2-235
1-10-02 Call by Call Type of Number Assignment................................................2-237
1-10-03 Call by Call Numbering Plan ID Assignment...........................................2-239
1-10-04 Call by Call Network ID Assignment........................................................2-241
1-10-05 Call by Call Facility Coding Value Assignment (Service) ........................2-243
1-10-06 Call by Call Facility Coding Value Assignment (Feature) ........................2-245
1-10-07 Call by Call Service Parameter Assignment............................................2-247
1-10-08 Call by Call Max Digit Assignment ..........................................................2-249
1-10-09 Call by Call Simulated Facility Group Assignment..................................2-251
1-10-20 Call by Call Outgoing SFG Assignment ..................................................2-253
1-10-21 Call by Call Outgoing/Incoming SFG Assignment...................................2-255
1-10-22 Call by Call Incoming Type Selection ......................................................2-257
1-11-00 T1 Signal Format Selection .....................................................................2-259
1-11-01 Clear Channel Selection .........................................................................2-260
1-11-02 Line Length Selection ..............................................................................2-261
1-11-05 T1 Channel Selection ..............................................................................2-262
1-11-06 Signaling Selection ..................................................................................2-264
1-11-07 DTI Trunk Type Assignment ....................................................................2-265
1-11-08 Digits Delete for T1 ANI Assignment .......................................................2-267
1-12-00 ACD/UCD Group Pilot Number Assignment ...........................................2-269
1-12-01 ACD/UCD Group Overflow Destination Assignment ...............................2-271
1-12-02 ACD/UCD Overflow Time Selection ........................................................2-273
1-13-00 PRT Channel Assignment .......................................................................2-275
1-13-01 PRT Signal Format Selection ..................................................................2-277
1-13-02 Clear Channel Selection .........................................................................2-279
1-13-03 Call by Call Service Selection.................................................................2-280
1-13-04 PRT B Channel Outgoing Priority Selection ............................................2-281
1-13-05 PRT B Channel-to-Trunk Group Assignment ..........................................2-282
1-14-00 ARS Allow/Deny Selection ......................................................................2-285

viii Table of Contents
___________________________________________________________________________________
___________________________________________________________________________________
Document Revision 1 Elite IPK
1-14-01 ARS Dialing Assignment .........................................................................2-286
1-14-02 ARS Dial Allow/Deny Selection ...............................................................2-288
1-14-03 ARS Route Table Number Assignment ...................................................2-290
1-14-04 ARS Trunk Group to Route Number Assignment ...................................2-292
1-14-05 ARS Digit Delete Assignment .................................................................2-294
1-14-06 ARS Digit Add Assignment .....................................................................2-296
1-14-07 ARS Max Digit Assignment .....................................................................2-298
1-15-00 K-CCIS Main/Remote Office Selection ...................................................2-301
1-15-01 Common Signal Channel Data Speed Assignment ................................2-303
1-15-02 Common Signal Channel Assignment ....................................................2-305
1-15-03 Originating Point Code Assignment ........................................................2-307
1-15-04 Destination Point Code Assignment ........................................................2-309
1-15-05 Destination Point Code Transfer Assignment .........................................2-311
1-15-06 Originating Office Code Number Assignment .........................................2-314
1-15-07 K-CCIS Message Response Timeout Assignment .................................2-316
1-15-08 Link Reconnect Allow/Deny Selection.....................................................2-318
1-15-09 K-CCIS Maximum Call Forwarding Hop Assignment ..............................2-320
1-15-10 Calling Name Display Allow/Deny Selection ...........................................2-322
1-15-11 Centralized Billing Allow/Deny Selection .................................................2-324
1-15-12 Centralized Billing – Point Code of Center Office Assignment ................2-326
1-15-13 Centralized Day/Night Switching for Remote Office Assignment ............2-328
1-15-14 Centralized Day/Night Switching for Main Office Assignment .................2-330
1-16-00 Auto Negotiation Yes/No Selection .........................................................3-333
1-16-01 Port Speed Selection – 10/100 Base-T ..................................................3-335
1-16-02 Port Duplex Mode Selection ....................................................................3-337
1-16-03 MDI/MDIX Mode Selection ......................................................................3-339
1-16-04 VLAN Mode Selection .............................................................................3-341
1-16-05 Default VLAN ID Assignment ..................................................................3-343
1-16-06 Port Based Priority Selection ..................................................................3-345
1-16-07 High Priority RX Tag Assignment ............................................................3-347
1-16-08 High Priority TX Tag Assignment ............................................................3-349
1-16-09 Low Priority TX Tag Assignment .............................................................3-351

Elite IPK Document Revision 1
Programming Manual ix
___________________________________________________________________________________
___________________________________________________________________________________
1-16-10 Port Mirroring Selection ...........................................................................3-353
1-16-11 Mirroring Source Port Assignment ..........................................................3-355
1-16-12 Mirroring Target Port Assignment ...........................................................3-357
1-16-13 VLAN Group to VLAN ID Assignment .....................................................3-359
1-16-14 VLAN Group and Port Selection .............................................................3-361
1-16-15 VLAN Tag Insertion Selection .................................................................3-363
1-16-16 Flow Control for Full Duplex Selection ....................................................3-365
1-16-17 Back Pressure for Half Duplex ................................................................3-367
2-01 Trunk to Tenant Assignment ...................................................................2-369
2-05 Line Key Selection ..................................................................................2-371
2-06 Line Key Selection for Tenant Mode .......................................................2-372
2-07 System Speed Dial Display Assignment .................................................2-375
2-08 ECR Relay to Tenant Assignment ...........................................................2-377
2-09 DID Limit to Tenant Assignment ..............................................................2-378
3-00 Trunk Name/Number Assignment ...........................................................2-379
3-02 Trunk Status Selection ............................................................................2-380
3-03 Trunk-to-Trunk Group Assignment ..........................................................2-381
3-04 Trunk-to-Trunk Transfer Yes/No Selection ..............................................2-382
3-05 Trunk Incoming Answer Mode Selection .................................................2-384
3-06 Automatic Tandem Trunk Assignment ....................................................2-386
3-07 CO/PBX Ringing Variation Selection .......................................................2-387
3-11 CO External Source Selection .................................................................2-388
3-12 Trunk-to-MOH Trunk Assignment ...........................................................2-389
3-14 Tie Line Type Assignment .......................................................................2-390
3-15 Trunk DTMF Duration/Interdigit Selection...............................................2-392
3-16 Tie Line Prepause Time Selection ..........................................................2-394
3-17 Tie Line Answer Detect Time Selection ..................................................2-395
3-18 Tie Line Release Detect Time Selection .................................................2-396
3-19 Tie Line/CO/PBX Incoming Signal Detect Time Selection ......................2-398
3-20 Tie Line Loop Off-Guard Time Selection .................................................2-400
3-21 Tie Line Length of Wink Signal Selection ................................................2-402
3-22 Tie Line Length of Delay Signal Selection ...............................................2-404

xTable of Contents
___________________________________________________________________________________
___________________________________________________________________________________
Document Revision 1 Elite IPK
3-24 Tie Line Incoming Interdigit Timeout Selection .......................................2-406
3-25 Tie Line Wink/Delay Signal Detect Timeout Selection ............................2-408
3-27 Tie Line Dial Tone Selection ...................................................................2-410
3-28 Tie Line Reorder Tone Selection ............................................................2-411
3-29 Trunk Internal Transmit Pad Selection ....................................................2-413
3-30 Trunk Internal Receive Pad Selection .....................................................2-415
3-31 Trunk External Transmit Pad Selection ...................................................2-417
3-32 Trunk External Receive Pad Selection ....................................................2-419
3-33 Disconnect Recognition Time Selection ..................................................2-421
3-38 Automated Attendant Message to Trunk Selection .................................2-422
3-40 Automatic Release Signal Detection Selection .......................................2-423
3-41 Delay Announcement Assignment ..........................................................2-424
3-42 DIT Assignment .......................................................................................2-425
3-43 ANA Assignment .....................................................................................2-426
3-44 Caller ID Display Assignment for CO/PBX Line ......................................2-427
3-45 Live Record Trunk Selection ...................................................................2-428
3-50 ISDN Line SPID Assignment ...................................................................2-429
3-52 ISDN Trunk Directory Number Assignment ............................................2-430
3-53 Caller Name Indication Selection ............................................................2-431
3-59 Automated Attendant Function Selection ................................................2-432
3-61 DIT/ANA Delay Answer Time Selection ..................................................2-433
3-62 DIT Tenant Assignment ..........................................................................2-435
3-63 DIT Weekend Mode Selection ................................................................2-436
3-64 DIT Night Mode Delay Answer Selection ................................................2-437
3-65 Hold Tone Automated Attendant Selection .............................................2-438
3-67 CO/PBX Ringing Pattern Selection .........................................................2-440
3-69 911 – Cut Through Trunk Selection ........................................................2-442
3-70 CIC Number Assignment ........................................................................2-444
3-90 Polarity Reverse Selection ......................................................................2-446
3-91 Trunk Type Selection ..............................................................................2-447
3-92 Trunk (Installed, DP/DTMF) Selection ....................................................2-448
4-01 CO/PBX Ring Assignment (Day Mode) ...................................................2-449

Elite IPK Document Revision 1
Programming Manual xi
___________________________________________________________________________________
___________________________________________________________________________________
4-02 CO/PBX Ring Assignment (Night Mode) .................................................2-451
4-03 Doorphone Chime Assignment (Day Mode) ............................................2-453
4-04 Doorphone Chime Assignment (Night Mode) ..........................................2-455
4-07 Code Restriction Class Assignment (Day Mode) ....................................2-457
4-08 Code Restriction Class Assignment (Night Mode) ..................................2-458
4-09 Telephone to Tenant Assignment ...........................................................2-459
4-10 Station Number Assignment ....................................................................2-461
4-11 Ringing Line Preference Selection ..........................................................2-463
4-12 Line Key Selection for Telephone Mode .................................................2-465
4-13 CO/PBX Busy Forward Station Assignment ............................................2-468
4-14 Intercom Master Hunt Number Selection ................................................2-469
4-15 Intercom Master Hunt Number Forward Assignment ..............................2-471
4-17 Station to Class of Service Feature Assignment .....................................2-473
4-18 Station Name Assignment .......................................................................2-475
4-19 Trunk Outgoing Restriction ......................................................................2-476
4-23 Prime Line/Hot Line Assignment .............................................................2-478
4-24 SLT Hookflash Assignment .....................................................................2-480
4-26 DISA ID Number Station Assignment ......................................................2-482
4-28 Multilingual LCD Indication Selection ......................................................2-483
4-29 HFU Selection .........................................................................................2-484
4-30 Hold/Transfer Recall Display Selection ...................................................2-485
4-31 Receiving Internal/All Call Page Selection ..............................................2-486
4-32 Trunk Digit Restriction .............................................................................2-487
4-35 Voice Mail/SLT Selection ........................................................................2-488
4-36 Voice Prompt Selection ...........................................................................2-490
4-37 Extension Line Key Ring Assignment (Day Mode) ..................................2-491
4-38 Extension Line Key Ring Assignment (Night Mode) ................................2-493
4-39 APR Ring Mode Assignment ...................................................................2-495
4-40 LCR Class Selection ...............................................................................2-497
4-41 SIE/CAR Ringing Line Preference Selection ...........................................2-499
4-42 Call Forward-Busy Immediately/Delay Selection ....................................2-501
4-43 Station to Call Appearance Block Assignment ........................................2-502