NEC AccuSync 120 Owner's manual

V
oice Mail
and
Voice Response System
User Guide
Intelligent Hybrid System

1
Voice Mail Function Numbers
67 + Mail Box - Mail Box Key - for direct access to mailbox
68 + 0 - Voice Mail Service - skip message forward and replaying
68 + 1 - Voice Mail Service - skip message backward and replaying
69 + 0 - Conversation Record - Start/stop manual conversation record
69 + 1 - Conversation Record - Delete conversation and re-record
69 + 2 - Conversation Record - Cancel call record and delete
70 + Mailbox - Automated Attendant - set call forward to Voice Mail.
71 + Mailbox - Greeting Message - select one of three greetings.
Programming a Voice Mail Key
1. Press SPK key.
2. Dial 851.
3. Press the key you want to program.
4. Enter the 2-digit function number,
followed by any additional information
required. (See table below.)
5. Press HOLD.
Voice Mail Function Keys VMS
MailboxPassword VMS
To Check the Function of a
Programmable Function Key
1. Press CHECK.
2. Press the programmed key.
The programmed function is
displayed.
Setting Your Password
System Phone
1. Press Voice Mail Access key
(SC 851:67).
2. Dial service code 65#.
3. Dial new four digit password.
4. Dial #.
5. Your password will be spoken to you.
6. Dial 0# to confirm (or 1# to cancel).
7. Hang up.
Single Line Telephone
1. Lift handset.
2. Dial 884 (default).
3. Enter mailbox number (and
password).
4. Dial service code 65#.
5. Dial new four digit password.
6. Dial #.
7. Your password will be spoken to you.
8. Dial 0# to confirm (or 1# to cancel).
9. Hang up.
Deleting Your Password
System Phone
1. Press Voice Mail Access key
(SC 851:67).
2. Dial service code 65#.
3. Dial 9999.
4. Dial #.
5. Dial 0# to confirm (or 1# to cancel).
Single Line Telephone
1. Lift handset.
2. Dial 884 (default).
3. Enter mailbox number (and
password).
4. Dial service code 65#.
5. Dial 9999.
6. Dial #.
7. Dial 0# to confirm (or 1# to cancel).
8. Hang up.

2
Function Service
Code Optional Function Option Code
Help 0#
Replay Message 1#
Pause/Restart the Playback 4#
Erase Message and Play Next
Message
(during message playback) 7#
Save Message and Play Next Message 9#
Copy the Message 2#
Skip Playback Forward 8 seconds 3#
Skip Playback Backward 8 seconds 6#
Broadcast the Message 28#
Play Message 1#
Exit *#
Erase All Messages 7# Confirm Erase 0#
End Recording of Message 9#
Broadcast Message to a Multiple
Address Group 2#
Play 31#
Record 32#
Greeting
Message 1
Erase 37#
Play 35#
Record 33#
Greeting
Message 2
Erase 38#
Play 36#
Record 34#
Greeting
Message 3
Erase 39#
Notify to an Extension 1#
Notify to an External Number 2#
Cancel Notification 0#
Message Notification 61#
Exit *#
Set Automated Attendant 62#
Play Messages
“First In First Out 63#
Play Messages
“Last In First Out 64#
Password Setting 65#
Message Registration Control
Setting 66#
Exit *#
VoiceMailServiceCodes VMS

3
Voice Mail Messages VMS
Listening to Messages
System Phone
1. Press Voice Mail Access key
(SC 851:67).
2. Messages are automatically played
back.
Single Line Telephone
1. Lift handset.
2. Dial 884 (default).
3. Enter mailbox number (and
password).
4. Dial service code 1#.
5. Listen to messages.
Recording a Message to Send to a
Mailbox
1. Press SPK key or lift handset.
2. Dial 884 (default).
3. Dial *.
4. Dial the mailbox number you wish to
send a message to.
5. Dial #.
6. Record message.
7. Hang up.
Voice Mail Access from Outside
1. Dial in to listen to your personal
greeting.
2. After your greeting has ended, two
short beeps will be heard.
3. Enter your password (if set).
4. Dial #.
5. You now have access to the service
code options for your mailbox
(e.g. dial 1# to listen to your
messages).
Broadcast List
System Phone
1. Press Voice Mail Access key
(SC 851:67).
2. Dial service code 2#.
3. Dial abbreviated broadcast list
number (0-9).
4. Dial #.
5. Record Message.
6. Hang up.
Single Line Telephone
1. Lift handset.
2. Dial 884 (default).
3. Enter mailbox number (and
password).
4. Dial service code 2#.
5. Dial abbreviated broadcast list
number (0-9).
6. Dial #.
7. Record Message.
8. Hang up.
Transferring a Message to a
Broadcast List
1. After the message playback has
ended,
2. Dial 28#.
3. Dial abbreviated broadcast list
number (0-9).
4. Dial #.
5. Dial 0# to accept.
6. Hang up.

4
Message Notification VMS
Setting Message Notification
System Phone
1. Press Voice Mail Access key
(SC 851:67).
2. Dial service code 61#.
3. Dial 1# for an extension call, 2# for an
outside call, or 0# to cancel.
4. If either 1# or 2# is dialled, enter
telephone number followed by # (it is
not necessary to enter a trunk access
code).
5. The dialled number will be read out.
6. Dial 0# to confirm (or 1# to cancel).
7. Hang up.
Single Line Telephone
1. Lift handset.
2. Dial 884 (default).
3. Enter mailbox number (and
password).
4. Dial service code 61#.
5. Dial 1# for an extension call, 2# for an
outside call, or 0# to cancel.
6. If either 1# or 2# is dialled, enter
telephone number followed by # (it is
not necessary to enter a trunk access
code).
7. The dialled number will be read out.
8. Dial 0# to confirm (or 1# to cancel).
9. Hang up.
Cancelling Message Notification
System Phone
1. Press Voice Mail Access key
(SC 851:67).
2. Dial service code 61#.
3. Dial 0# to cancel.
4. Dial 0# to confirm (or 1# to cancel).
5. Hang up.
Single Line Telephone
1. Lift handset.
2. Dial 884 (default).
3. Enter mailbox number (and
password).
4. Dial service code 61#.
5. Dial 0# to cancel.
6. Dial 0# to confirm (or 1# to
cancel).
7. Hang up.

5
Personal Automated Attendant VMS
Forwarding Your Calls to Voice Mail
System Phone
1. Press Automated Attendant key
(SC 851:70) repeatedly until the
desired call forward setting is made –
All, No Answer, Busy, Busy/No
Answer, Cancel.
-OR-
2. Press SPK key or lift handset.
3. Dial 790 and then select the desired
call forward setting.
1for All Calls.
2for No Answer.
3for Busy.
4for Busy/No Answer
0Cancel call forward.
5. Hang up.
Single Line Telephone
1. Lift Handset.
2. Dial 790 and then select the desired
call forward setting.
1for All Calls.
2for No Answer.
3for Busy.
4for Busy/No Answer
0Cancel call forward.
3. Hang up.
You can also set call forward while
accessing your mailbox by selecting the
Voice Mail service code 62# (Automated
Attendant).
32# Record Message 1
33# Record Message 2
34# Record Message 3
To Record a Greeting Message
System Phone
1. Press Voice Mail Access key
(SC 851:67)
2. Dial service code (see table below).
3. Record your message, after the beep.
4. Dial 9# to end the recording.
5. Hang up.
Single Line Telephone
1. Lift Handset.
2. Dial 884 (default).
3. Enter mailbox number (& password).
4. Dial service code (see table below).
5. Record your message, after the beep.
6. Dial 9# to end the recording.
7. Hang up.
To Listen to a Greeting Message
System Phone
1. Press Voice Mail Access key
(SC 851:67).
2. Dial service code (see table below).
3. Listen to the message and hang up.
Single Line Telephone
1. Lift Handset.
2. Dial 884 (default).
3. Enter mailbox number (and
password).
4. Dial service code (see table below).
5. Listen to the message and hang up.
31# Play Message 1
35# Play Message 2
36# Play Message 3

6
Personal Automated Attendant VMS
To Erase a Greeting Message
System Phone
1. Press Voice Mail Access key
(SC 851:67).
2. Dial service code (see table below).
3. Dial 0# to erase message.
Single Line Telephone
1. Lift Handset.
2. Dial 884 (default).
3. Enter mailbox number (and
password).
4. Dial service code (see table below).
5. Dial 0# to erase message.
37# Erase Message 1
38# Erase Message 2
39# Erase Message 3
Selecting a Greeting Message to Play
System Phone
1. Press Change Attendant Message
key (SC 851:71) repeatedly to toggle:
Message 1 = Lamp extinguished
Message 2 = lamp steady
Message 3 = lamp flashing.
A
Single Line Telephone or a System
Phone without a ‘Change Attendant
Message’ key, cannot change the
Greeting Message.
ConversationRecording VMS
AUTOMATIC RECORDING
Automatic Recording starts automatically
when the call is answered.
MANUAL RECORDING
To Start Manual Recording
1. Press the Manual Conversation
Recording Key at any time during the
conversation.
Storing a Manual Recording
Message
1. If prompted at end of call, enter the
mailbox number where to store
message.
-OR-
If Callback Mode is set, wait for the
Voice Mail system to ring back after
call has ended, then enter the mailbox
number where to store the message,
and dial #.
If you do not answer the callback or
you do not specify a mailbox number,
the recorded conversation will be
deleted.
Programming a Manual Conversation
Recording Key
1. Press SPK key.
2. Dial 851.
3. Press the key you want to program.
4. Dial service code 69.
5. Dial 0.
6. Press HOLD.
Listening to a Recorded Conversation
System Phone
1. Press Voice Mail Access key
(SC 851:67).
2. Messages are automatically played
back.
Single Line Telephone
1. Lift handset.
2. Dial 884 (default).
3. Enter mailbox number (and
password).
4. Dial service code 1#.
5. Listen to messages.

7
General Message VMS
To listen to the General Message
System Phone
Your MW lamp flashes when there is a
new General Message. A voice message
p
eriodically reminds you.
1. While telephone is idle, dial 4.
-OR-
2. Press the SPK key or lift handset.
3. Dial 711.
Normally your MW lamp will now go off.
If it continues to flash, you have
unanswered
Message Waiting requests or
new messages in your Voice Mail
mailbox.
Single Line Telephone
1. Press the SPK key or lift the handset.
2. Dial 712.
3. Dial 5 (Listen).
4. Listen to message.
5. Dial 5 again to repeat.
6. Hang up.
To Record the General Message
1. Press the SPK key or lift the handset.
2. Dial 712.
3. Dial 7 (Record).
4. Record message, then dial # when
finished.
5. Hang up.
To Erase the General Message
1. Press the SPK key or lift the handset.
2. Dial 712.
3. Dial 3 (Erase).
4. Press Hold to cancel without erasing
(System Phone only).
5. Hang up.

8
PersonalGreeting VRS
To enable a Personal Greeting
1. Press the SPK key or lift handset,
and Dial 713.
-OR-
Press the Call Forwarding (Device)
key (SC 851:17).
2. Dial 7.
3. Record your Personal Greeting, or
if you already have Personal Greeting
or Park and Page set up, you can
dial:
7 to re-record
5 to listen (then # to listen again)
3 to erase (press HOLD to cancel
erase)
4. Dial # + Personal Greeting condition:
2 = Busy/No Answer
4 = Immediate All Calls
6 = No Answer
5. Dial the destination to receive your
calls. The destination can be:
· A co-worker’s extension.
· Off-premise via Common
Abbreviated Dialling (by entering
813 + bin number).
· Greeting without forwarding so
caller hears busy (by entering
your extension number).
· You cannot forward to a
Department Group pilot number.
6. Dial Personal Greeting type:
2 = All calls
3 = Outside calls only
4 = Intercom calls only
7. Hang up.
Your DND or Call Forwarding (Device)
Programmable Function Key flashes
when Call Forwarding is activated.
To cancel your Personal Greeting
1. Press the SPK key or lift handset.
2. Dial 713 + 73.
3. Hang up.

9
VRS Messages VRS
To Record, Listen to or Erase a VRS
Message via DISA
1. Place a call into the system.
2. After the system answers, dial the
DISA password (default=000000).
3. Dial 716 and the VRS password.
4. Dial the function you want.
7 = Record
5 = Listen
3 = Erase
5. Dial the message number (01-48).
6. Record the message and press # to
end recording.
· If you dialled 7 to record, you can
dial # to listen to the message
you just recorded.
· If you dialled 5 to listen, you can
dial 5 and message number to
hear it again or if you want to
record, listen to or erase another
message, go to step 4.
· If you dialled 3 to erase, you must
go to step 7 (hang up).
7. Hang up.
VRS Message Numbers
By default, VRS message numbers are
not assigned. In your system, the
following message numbers have been
assigned to common VRS messages.
Message Name
Message
Number
(01~48)
Automated Attendant
Guidance Message
General Message
Preamble Message
To Record a VRS Message
1. Press SPK key or lift handset.
2. Dial 716.
3. Dial 7 (Record).
4. Dial the message number (01-48).
Ensure that the message number
selected is not used for other VRS
functions.
5. Record your message, after the beep.
Normally, your message cannot
exceed 2 minutes. If you hear,
“Recording finished,” you have
exceeded the allowed message
length.
6. Press # to end the recording.
7. Hang up.
To Listen to a Recorded Message
1. Press SPK key or lift handset.
2. Dial 716.
3. Dial 5 (Listen).
4. Dial the message number (01-48).
You’ll hear the previously recorded
message. If you hear a beep instead,
there is no previous message
recorded.
5. Press # to listen to the message
again.
6. Repeat from step 3 to listen to anothe
r
message.
7. Hang up.
To Erase a Recorded Message
1. Press SPK key or lift handset.
2. Dial 716.
3. Dial 3 (Erase).
4. Dial the message number (01-48).
5. Press HOLD (system phone only) to
Cancel the procedure without erasing
(and return to step 3).
6. Hang up to erase the message.