NEC UNIVERGE SL2100 Instruction manual

SL2100 Multi- Line Terminal Quick User
Guide
Making a Call
Lift the Handset or press Speaker (For the remainder of this guide we will refer to lifting
the handset but pressing the Speaker key is also valid)
•Dial the required internal number
•For external calls, dial 0 first for an outside line
Hold
Ask the caller to please hold:
• Press Hold - hold key flashes.
•You may replace handset if you wish.
To retrieve a call:
•Lift the handset.
•Press the Flashing Line Key
Transfer
With a call in progress:
•Press Transfer
•Dial an extension, external number or programmed one-touch key and
announce the call when they answer (optional)
•Replace the handset
Note: If the called extension is busy or does not answer, press the Green Flashing
Key to return to your caller. If the extension answers and indicates that they do not
wish to take the call, ask them to hang up and you will be put directly
back to the original caller.

Redial
Last dialed number
•Lift the handset and press #5 to initiate the call
Recently dialed numbers
•Without lifting handset press Redial (Right Cursor key).
•Press the Cursor button up or down to search for the required number
•Lift the handset to initiate the call
Conference
With a call in progress (internal or external)
•Press the More soft key and then the Conf
soft key
•Dial an internal or external number
•When the third party answers, press the
Add soft key
Repeat the above 3 steps until all parties are in the conference. Then press the
Begin soft key to begin the conference
Note: Any party may exit the conference by hanging up. As long as at least one of the
parties is an extension on the phone system the conference will remain active.
Call Pick Up
To answer a ringing extension in your group:
•Lift the handset and dial * #
To answer a call ringing at a specific extension:
•Lift the handset and dial * *
plus the other extensions number
Call Park
To park a call in the system and retrieve from any other extension
•Ask the caller to hold then press Transfer
•Dial the Call Park access code #6
•Enter a park position (01-64)
Call or Page the desired staff member to retrieve the call from the allocated park
position.
Note: If the park position you select is in use you will receive busy tone.
To retrieve a parked call
•Dial the Answer Park access code *6
•Enter a park position (01-64)
Note: If the parked call is not picked up it will recall to the original extension.

Paging
Allows a user to page all digital handsets.
•Lift the handset and dial *10
Voice Call Announce
Allows the caller to make the receiver’s digital phone automatically answer the
internal call and go directly to speaker/hands free.
•Lift the handset and dial the extension number
•Press Voice soft key or dial 1 while the other phone is still ringing and speak over
the intercom
Auto Handsfree Answer
Incoming internal calls to the digital extension are automatically answered and put
on hands free/speaker.
To Activate:
•Press the Speaker key and dial 721
To Cancel:
•Press the Speaker key and dial 723
Voicemail
To access your mailbox and retrieve messages:
•Push the VM soft key, or
•Lift the handset and dial *8
To record a greeting for your mailbox: Access your mailbox, then using the soft
keys below the display select:
•Greet,
•Gr1, Gr2 or Gr3,
•Rec
•Speak into the handset after the tone.
•Once you are done recording press #
Use the Lstn soft key to playback the greeting
To forwards calls to your mailbox:
when your extension is busy or after the no answer timer expires
•Press the Speaker key and dial 744
•Dial 1 to set
•Dial the destination number 199
•Press Speaker to store
To Cancel:
•Press the Speaker key and dial 744
Dial 0 to cancel.