1300 338 266
CONFERENCE CALL:
With a call in progress (internal or external)
•Press CONF Key.
•Dial internal or external number.
•When the third party answers, press ADD Soft key.
•Press BEGIN Key.
•A three way conference is now established.
NOTE:
Any party may exit the Conference by hanging up. The 2 parties will remain connected, as
long as one of the remaining parties is internal.
ANSWER A SECOND CALL
•Ask first caller to hold the line
•Press HOLD key.
•Press ANSWER key and speak to second caller.
NOTE:
Toggle between both calls by pressing HOLD, and pressing required line.
CALL FORWARD ALL
Forwards all calls immediately.
To Set
•Lift Handset and press CF/A Key or dial 741.
•Dial 1 to Set.
•Dial destination number.
•Replace Handset.
To Cancel
•Lift handset, press CF/A key or dial 741.
•Dial 0 to Cancel.
•Replace Handset.
CALL FORWARD BUSY/NO ANSWER
Forwards calls only after 4 –6 rings and on busy tone.
To Set
•Lift Handset and press B/NA Key or dial 744.
•Dial 1 to Set.
•Dial destination number.
•Replace Handset.
To Cancel
•Lift handset and press B/NA key or dial744.
•Dial 0 to Cancel.
•Replace Handset.
CALL PICK UP
To answer a ringing extension in your group:
•Lift handset and press PICK Soft key or dial ∗#.
For ringing extensions not in your group:
•Lift handset, dial ∗∗plus ringing Extension number
CALLBACK –To set a callback to a busy extension
•When you call an extension dial #to set the calback
•When the called extension becomes idle, the system will automatically call you back
MESSAGE WAIT
When calling a busy or unanswered digital telephone:
To Set
•Dial 0 or press MW Soft key.
•Replace Handset.
The destination extension will display MW as well as the flashing LED.
To Cancel (from originating extension)
•Lift Handset or press Speaker.
•Dial 773 for all or 771 for specific number.
•Replace Handset.
To Cancel or Respond (from receiving extension)
•Lift Handset or press Speaker.
•Dial ∗0 or press MW Soft key.
•Either press Call or Canc Soft key.
•Replace Handset.
DISPLAY
To adjust the Display:
Press the Cursor button up or down while the phone is idle.
SPEAKE/RECEIVER VOLUME
To adjust the Speaker/Receiver Volume:
Press the Cursor button up or down during conversation
RING VOLUME
To adjust the Ringing Volume:
Press the Cursor button up or down during ringing.
The DT Series has 8 kinds of ringer tones which you can select :
•Press Speaker anddial 720.
•Dial 1 to set Internal ring: Dial 2 to set External ring.
•Dial code for desired ring pattern (1~8).
•Replace Handset.
