NEW BRUNSWICK SCIENTIFIC C2 Classic User manual

C2 Classic
Platform Shaker
MANUAL NO: M1244-0051
Revision C
November 2, 2004
NEW BRUNSWICK SCIENTIFIC CO., INC.
BOX 4005 •44 TALMADGE ROAD •EDISON, NJ 08818-4005
Telephone: [phone] •1-800-631-5417
Fax: [phone] •Telex: 4753012 NBSCO
Internet: http://www.nbsc.com •E-mail: [email protected]

2
M1244-0051 YC2 Classic Platform Shaker User’s Guide

3
INTERNATIONAL OFFICES:
BELGIUM
New Brunswick Scientific NV-SA
Stationsstraat 180/4
3110 Rotselaar
België/Belgique
Tel: [phone]
Fax: [phone]
E-mail: [email protected]
GERMANY
New Brunswick Scientific GmbH
In Der Au 14
D-72622 Nürtingen
Deutschland
Tel: [phone]
Fax: [phone]
E-mail: [email protected]
CHINA
New Brunswick Scientific Co., Inc.
Room 1501, Xiangjiang Building, No. 18
Lane 1265, Zhongshan Road (W)
Shanghai 200051, P.R. China
Tel: [phone]
Fax: [phone]
E-mail: [email protected]
THE NETHERLANDS
New Brunswick Scientific BV
Kerkenbos 1101, 6546 BC Nijmegen
P.O Box 6826, 6503 GH Nijmegen
Nederland
Tel: [phone]
Fax: [phone]
E-mail: [email protected]
FRANCE
New Brunswick Scientific SARL
3, rue des Deux-Boules
75001 Paris
France
Tel: [phone]
Fax: [phone]
E-mail: [email protected]
UNITED KINGDOM
New Brunswick Scientific (UK) Ltd.
17 Alban Park
St. Albans, Herts. AL4 0JJ
United Kingdom
Tel: [phone] or 0800 581331
Fax: [phone]
E-mail: [email protected]
Web: www.nbsuk.co.uk
New Brunswick Scientific Co., Inc. User’s Guide

4
THIS PAGE IS INTENTIONALLY BLANK
M1244-0051 YC2 Classic Platform Shaker User’s Guide

5
CAUTION!
This equipment must be operated as described in this
manual. If operational guidelines are not followed,
equipment damage and personal injury can occur.
Please read the entire User’s Guide before attempting to
use this unit.
Do not use this equipment in a hazardous atmosphere or
with hazardous materials for which the equipment was not
designed.
New Brunswick Scientific Co., Inc. (NBS) is not responsible
for any damage to this equipment that may result from the
use of an accessory not manufactured by NBS.
New Brunswick Scientific Co., Inc. User’s Guide

6
THIS PAGE IS INTENTIONALLY BLANK
M1244-0051 YC2 Classic Platform Shaker User’s Guide

7
Copyright Notice
New Brunswick Scientific Company, Inc.
Box 4005 44 Talmadge Road
Edison, New Jersey 08818-4005
©Copyright 2004 New Brunswick Scientific Co., Inc.
All Rights Reserved.
Reproduction, adaptation, or translation without prior written permission from
New Brunswick Scientific is prohibited.
Disclaimer Notice
New Brunswick Scientific Co., Inc. reserves the right to change
information in this document without notice. Updates to information in this
document reflect our commitment to continuing product development and
improvement.
Manual Conventions
#NOTE:
Notes contain essential information that
deserves special attention.
CAUTION!
Caution messages appear before procedures
which, if caution is not observed, could result
in damage to the equipment.
WARNING!
Warning messages alert you to specific
procedures or practices which, if not followed
correctly, could result in serious personal
injury.
Bold Text in bold face type emphasizes key words or
phrases.
New Brunswick Scientific Co., Inc. User’s Guide

8
THIS PAGE IS INTENTIONALLY BLANK
M1244-0051 YC2 Classic Platform Shaker User’s Guide

9
Every Instrument manufactured by the
New Brunswick Scientific Co., Inc. is warranted to be free
from defects in material and workmanship. This apparatus, with
the exception of glassware, lamps and electrodes (where supplied),
is warranted against faulty components and assembly for 2 years
in the United States & Canada and for 1 year elsewhere. Our
obligation under this warranty is limited to repairing or replacing
the instrument or part thereof, which shall, upon our examination,
prove to be defective. The warranty period begins at the date of
shipment. This warranty does not extend to any NBS products
which have been subjected to misuse, neglect, accident or
improper installation or application; nor shall it extend to
products which have been repaired or altered outside the
NBS factory without prior authorization from the
New Brunswick Scientific Co., Inc.
W A R R A N T Y
New Brunswick Scientific Co., Inc. User’s Guide

10
THIS PAGE IS INTENTIONALLY BLANK
M1244-0051 YC2 Classic Platform Shaker User’s Guide

11
TABLE OF CONTENTS
1OVERVIEW.......................................................................................................................13
1.1 SPECIFICATIONS............................................................................................................13
2INSPECTION, VERIFICATION & UNPACKING OF EQUIPMENT.......................15
2.1 INSPECTION OF BOXES ..................................................................................................15
2.2 PACKING LIST VERIFICATION .......................................................................................15
2.3 UNPACKING OF EQUIPMENT..........................................................................................15
2.4 INSPECTION OF EQUIPMENT ..........................................................................................15
3PREPARING THE LOCATION......................................................................................17
3.1 PHYSICAL LOCATION ....................................................................................................17
3.2 ENVIRONMENT..............................................................................................................17
4C2 SHAKER FEATURES ................................................................................................19
4.1 KEYPAD ........................................................................................................................19
4.2 PLATFORM ASSEMBLIES ...............................................................................................20
5GETTING STARTED.......................................................................................................21
5.1 INSTALLATION OF PLATFORM .......................................................................................21
5.2 INSTALLATION OF CLAMPS ...........................................................................................22
5.3 ELECTRICAL CONNECTIONS..........................................................................................22
6OPERATION .....................................................................................................................23
6.1 STARTING THE C2.........................................................................................................23
6.2 CONTINUOUS (UNLIMITED) RUN...................................................................................23
6.3 CHECKING ANY SETPOINT ............................................................................................23
6.4 TIMED FUNCTIONS........................................................................................................24
6.5 ALARM FUNCTIONS.......................................................................................................24
6.6 TOTAL RUNNING TIME..................................................................................................24
6.7 MAINT INDICATOR........................................................................................................25
6.8 POWER FAILURE ...........................................................................................................25
7PREVENTIVE MAINTENANCE....................................................................................27
7.1 CLEANING EXTERNAL SURFACES..................................................................................27
7.2 FUSE REPLACEMENT.....................................................................................................27
7.3 BELT REPLACEMENT.....................................................................................................29
8TROUBLESHOOTING....................................................................................................33
9REPLACEMENT PARTS AND ACCESSORY INFORMATION ..............................35
9.1 REPLACEMENT PARTS...................................................................................................35
9.2 ACCESSORIES................................................................................................................35
9.2.1 Dedicated Platforms & Capacities......................................................................35
9.2.2 Carriers & Test Tube Rack Capacities................................................................35
New Brunswick Scientific Co., Inc. User’s Guide

12
9.2.3 Universal Platform ..............................................................................................36
9.2.4 Accessory Flask Clamps......................................................................................36
10 DRAWINGS...................................................................................................................37
10.1 LIST OF DRAWINGS.......................................................................................................39
11 INDEX.............................................................................................................................41
M1244-0051 YC2 Classic Platform Shaker User’s Guide

13
1
1 O OV
VE ER RV VI IE EW W
The C2 Classic Platform Shaker is a portable benchtop shaker that provides horizontal plane
rotary motion in a ¾-inch (19 mm) circular orbit. A microprocessor controller with instantaneous
digital feedback controls the speed over a range of 50-400 RPM.
The shaker may be operated either continuously or in a timed mode via a programmable timer
for shaking periods of 0.1 hour to 99.9 hours.
The C2 is equipped with a visual alarm that is activated when an alarm condition exists as
follows:
• The end of a timed run
• Deviations of shaking speed
A wide variety of platforms, which are sold separately, can be used with the C2. Dedicated
platforms are available for a variety of flask sizes. Universal platforms, utility trays, utility
carriers and test tube racks are also available. The shaker does require a platform for operation.
1.1 Specifications
C2 Classic Shaker
Speed
Control Accuracy
Indication
Stroke
50-400 rpm
± 2 rpm
3 Digit LED
3/4 inch (1.9 cm)
Ambient Operating
Environment 5 - 45°C, 20 to 90% relative humidity, non-condensing
Alarms Visible warning indication when speed deviates more
than 5 rpm from setpoint, and when timer has expired.
Timer 0.1 hour to 99.9 hours. Shuts off agitation at end of
period. Can be deactivated for continuous operation.
Automatic Restart Automatic restart after power is restored. Setpoints and
operating status are retained in memory during power
interruption.
Electrical Requirements 110/120V AC 50/60 Hz, 1320 VA
220/240V AC 50/60 Hz, 1320 VA
Platform 11 inches X 13 inches (28 X 33 cm)
Overall Dimensions 14.5 inches W X 17.5 inches D X 7.4 inches H
(37 cm W X 44.5 cm D X 18.8 cm H)
Weight 35 lbs (16 kg) Net, 50 lbs (22.7 kg) Gross
New Brunswick Scientific Co., Inc. User’s Guide

14
THIS PAGE IS INTENTIONALLY BLANK
M1244-0051 YC2 Classic Platform Shaker User’s Guide

15
2
2 I IN
NS SP PE EC CT TI IO ON N,
, V VE
ER RI IF FI IC CA AT TI IO ON N &
&
U
UN
NP PA AC CK KI IN NG G O OF F E
EQ
QU UI IP PM ME EN NT T
2.1 Inspection of Boxes
After you receive your order from New Brunswick Scientific, inspect the boxes carefully
for any damage that may have occurred during shipping. Report any damage to the
carrier and to your local NBS Sales Order Department.
2.2 Packing List Verification
Verify on your NBS packing list that you have received the correct materials.
2.3 Unpacking of Equipment
Save all packing materials and User’s Guide. If any part of your order was damaged
during shipping, missing pieces, or fails to operate properly, please fill out the Customer
Satisfaction Form 6300 and return it by fax.
2.4 Inspection of Equipment
Verify that you have received the following equipment:
C2 CLASSIC SHAKER
100/120V 50/60 Hz (M1244-0002)
220/240V 50/60 Hz (M1244-0003)
POWER KIT (POWER CORD & FUSE)
100/120V 50/60 Hz (M1244-0600)
220/240V 50/60 Hz (M1244-0601)
New Brunswick Scientific Co., Inc. User’s Guide

16
THIS PAGE IS INTENTIONALLY BLANK
M1244-0051 YC2 Classic Platform Shaker User’s Guide

17
3
3 P PR
RE EP PA AR RI IN NG G T TH HE E L
LO
OC CA AT TI IO ON N
3.1 Physical Location
It is essential that the instrument be situated in an area where there is sufficient space for
the shaker and platform to clear walls and obstructions during operation. The surface on
which the unit is placed must be smooth, level, and able to support the shaker under full
load operating conditions.
3.2 Environment
The shaker is designed to operate optimally in the following ambient conditions:
• 5 - 45°C
• 20 to 90% Relative Humidity non-condensing
New Brunswick Scientific Co., Inc. User’s Guide

18
THIS PAGE IS INTENTIONALLY BLANK
M1244-0051 YC2 Classic Platform Shaker User’s Guide

19
4
4 C C2 2 S SH
HA AK KE ER R F
FE
EA AT TU UR RE ES S
4.1 Keypad
Figure 1: Keypad
MAINT
SET
TIME
MUTE
RPM
HRS
ºC
,
START
STOP
SELECT
V W
FUNCTION
INDICATORS
STATUS
INDICATORS
LED DISPLAY
USER INTERFACE KEYS
LED DISPLAY:
The digital display on the control panel is a three-digit LED DISPLAY. During normal
shaker operation the display will indicate:
• Shaker status (on/off)
• Shaking speed
• Setpoints
• Hours remaining (timed run)
USER INTERFACE KEYS:
• START/STOP This key is used to start or stop the shaker. It will
also activate or stop the timer when a timed run is
desired.
• SELECT This key is used to change the displayed parameter.
• V(UP), W(DOWN) These keys are used to adjust the setpoint of a
displayed parameter up or down. They also allow
the user to enter the
SET MODE for setpoint
changes.
New Brunswick Scientific Co., Inc. User’s Guide

20
STATUS INDICATORS:
Four status indicator lights are located to the left of the LED DISPLAY. They are:
• MAINT Remains lit after 10,000 hours of use. Accumulated
running time is internally monitored and may be
displayed as a guideline.
• SET Indicates that the shaker is in the SET MODE and
setpoints are being displayed and can be altered.
• TIME Indicates that the timer is in operation. The shaker
can be programmed to run for a preset time from
0.1hour to 99.9 hours. The timer can be disengaged
without stopping an ongoing run.
• MUTE Notapplicable
FUNCTION INDICATORS:
Four function indicator lights are located to the right of the LED DISPLAY. They indicate
the current parameter being displayed.
• RPM revolutions per minute
• HOURS time remaining
• °Cnot applicable
• *not applicable
4.2 Platform Assemblies
The C2 can be used with a wide variety of NBS 11-inch x 13-inch (28 x 33 cm)
platforms, which will accept a variety of clamps for flasks test tubes, etc.
A platform is a separate item and is required for operation. Refer to the
Replacement Parts and Accessory Information section of this manual for details.
M1244-0051 YC2 Classic Platform Shaker User’s Guide