NightSearcher TwinStar Connect User manual

TwinStar Connect User Manual
180° Swivel
Features:
Carry Handle
360° Rotational
light head
3 Optional adaptors available:
Accepts 18-21V batteries: Metabo, Festool and Hilti
(Battery not included)
NS Code: SPWORKSTAR-AD
Changing the battery adapters:
2) To change the adaptor, simply undo the screw and remove the adaptor.
1) Check which of the 4 adaptors matches your battery pack
Operation:
18-21V
5) Slide the battery cartridge into
adaptors making sure the battery
pack is fully seated.
There are two independent power switches,
to control each light head.
3) Push here on both sides and
pull off the adaptor.
4) Replace with the correct adaptor and re-screw back onto the lamp.
Push Push
Supplied with:
4 power tool battery adaptors
and tripod
Power / Light Mode Switch
1: On - High power
2: On - Medium power
3: On - Low power
4: Power off

Product weight Light: 2.1kg, Tripod: 2.3kg
Product size 208x92x92mm
NS Part No. NSTWINSTARC
All NightSearcher products have a 3-year standard warranty on all manufacturing defect from the date of purchase.
Please visit www.nightsearcher.co.uk for extended warranty information, proof of purchase is required.
NightSearcher Limited
Unit 4 Applied House, Fitzherbert Spur,
Farlington, Portsmouth, Hampshire,
PO6 1TT, UK
T: [phone]
E: [e-mail]
If at any time, you need to dispose of this product or parts of this product: please note that waste electrical products should not be disposed of with
ordinary household waste. Recycle where facilities exist. Check with your local authority for recycling advice.
Alternatively, NightSearcher is happy to take receipt of this product at end-of-life and will recycle it on your behalf.
To view and download the full manual
in multiple languages please go to
https://nightsearcher.co.uk/en/user-manuals.html
Or scan this QR code.
- Loosen the hand wheel and extend tripod legs
and secure tight using the hand wheel.
- Loosen the adjustment collar and extend the
tripod to the desired height and tighten the collar.
- Align the slots on the bottom of the light to the
tripod and push together until you here a click.
Check the light head is secured before using.
- To detach the light from the tripod,
press both the red button and lift the light.
Tripod setup:
Attaching the light to the tripod:
Releasing the light from the tripod:
Extends up to 1.6 metres