•Before installation; consider the
best place to position the rail,
taking into account all activities
it may be used for, e.g. sitting,
standing or reaching.
•They are intended to be used to
provide gripping or handle
positions around doorways,
stairwells, bathrooms and other
similar applications.
•After the position of the rail is
chosen for optimum use by the
client, consider the structure of
the wall and avoid any
electric/plumbing behind the
wall.
•Important; after installing the
product, perform a final tighten
and inspection of all fasteners.
•Test the installation by
vigorously pulling on the rail.
The rail should be rigid and
stable.
•The grab rail is designed for
general domestic use as an aid to
the movement of a person about
a normal dwelling.
•The grab rail must only be used
for the tasks it is intended to
perform. Do not use it to tie or
hang objects from or to secure
items to, as this may have serious
detrimental effects on its
performance and safety.
Care & Maintenance
•Inspect the stability and rigidity of
the product on a regular basis.
•Check all screws are tightened
and in good condition.
•Any rails showing signs of
damage or misuse must be
replaced.
Specification
This product is designed for a single
location installation.
Max* weight capacity 95 kg (15 st)
* Weight capacity only refers to the
rail, not to the fixings or retention in
the mounting surface.
Length:
F19467 – 300 mm (12")
F19479 – 450 mm (18")
F19480 – 600 mm (24")
•Fully read these instructions
before installation and use.
•This Grab Rail must be
correctly assembled, installed,
and maintained.
•This product must be installed
by a suitably qualified,
competent person.
•Only install the product in an
area where the mounting
surface is structurally sound.
•Strengthening modifications to
the fixing surface may be
required.
•Only install this product with
fixings matched to the grab
rail, type of mounting surface
and the loading conditions to
be applied. NRS is unable to
specify the type of fixing to use
because of the vast number of
possible types and surface
condition to which the grab rail
may be attached.
•The maximum load of this
product is 95 kg (15 st) based
on the product being fitted to a
suitable surface using
appropriate fixings and fitted
by a competent person.
•Do not place matches or
cigarettes on or near this
product.
•The grab rail should be
cleaned periodically using
normal domestic cleaning
materials.
•After cleaning always rinse
with water and wipe
thoroughly with a damp cloth
to remove any cleaning
material residue.
•Do not use strong or
concentrated acidic, alkaline
or other cleaning materials
which may damage or
discolour the rail.
•Where disinfecting is required
use a mild detergent
/disinfectant solution.
•Do not use abrasive cleaners.
Packaging
•The product is individually
packed to prevent it from
becoming soiled before use; it
may also be supplied bulk-
packed in an NRS branded
cardboard carton. Both are
suitable for recycling and
should be disposed of in
accordance with local
recycling regulations.
