Nuna IVVI totl User manual

instructions
totl system

32
Contents
Important Information
Safety and Recommendations 4
Warnings 6
Parts List 12
IVVI Stroller
How to Set Up the IVVI Stroller 14
How to Use the IVVI Stroller 18
IVVI Bassinet
How to Set Up the IVVI Bassinet 24
How to Use the IVVI Bassinet with the IVVI Stroller 26
Accessories
IVVI Infant Car Seat Post Adapters 28
IVVI Infant Car Seat Ring Adapter 30
IVVI Stroller Rain Cover 32
IVVI Stroller Footmuff 32
IVVI Stroller Child Tray & Toddler Handle 34
IVVI Stroller Removeable Basket 36
Cleaning and Maintenance 38
Warranty, Production Registration and Contact 39

54
Safety and Recommendations
Please take note of the following before using the Nuna
IVVI totl system.
Safety is very important to us and you can be assured that
our products comply with the relevant standards and that
they have been tested by a number of independent testing
laboratories.
The IVVI stroller is a patented product and complies with
US safety standards and ASTM F833.
The IVVI bassinet is a patented product and complies with
US safety standards, ASTM 2194 and ASTM F2050.
If you have any questions or comments regarding the
IVVI totl system, we will be glad to hear them through our
website nuna.eu
IMPORTANT!
KEEP THESE INSTRUCTIONS
FOR FUTURE REFERENCE:
READ CAREFULLY BEFORE
ASSEMBLY AND USE
OF THE BASSINET.

76
IVVI totl system
A child’s safety is your responsibility.
NEVER leave child unattended. Always keep your child
in view while in this product.
To avoid any danger of suffocation, remove all plastic
covers before using this product and destroy or keep
away from babies and children!
Keep small parts away from children as they pose a
choking hazard.
DO NOT let your child play with this product.
DO NOT place any item on the canopy of this product.
DO NOT leave this product exposed in the vicinity of a
strong source of heat i.e. a radiator or open re or store
this product in a damp place.
ALWAYS allow the fabric to dry naturally away from
direct heat.
Discontinue using these products should they become
damaged or broken.
Use original Nuna parts and accessories only.
WARNINGS
Failure to follow these warnings and instructions
could result in serious injury or death.
IVVI stroller
This stroller is intended for children from birth and up to
50 lbs maximum.
Use of the stroller with a child weighing more than 50 lbs
(22.7 kg) or 45 in. (114.3 cm) will cause excessive wear
and stress on the stroller.
We recommend using the most reclined position for
newborn babies.
NEVER carry more than one child at a time in this
product.
Avoid serious injury from falling or sliding out. Always
use seat belt. After fastening buckles, adjust belts to get
a snug t around your child.
To prevent a hazardous, unstable condition, do not place
more than 10 lbs (4.5 kg) in the stroller storage basket.
DO NOT use storage basket as a child carrier.
AVOID FINGER ENTRAPMENT Use care when folding
and unfolding the stroller. Be certain the stroller is fully
erected and latched before allowing your child near the
stroller.
NEVER use the stroller on stairs or escalators. You may
suddenly lose control of the stroller or your child may fall
out.
Negotiate curbs and rough ground carefully. Repeated
impact will cause damage to this product.
This stroller is to be used only at walking speed. Product
is not intended for use while jogging, skating, etc.

98
Adding accessories such as purses, shopping bags, or
parcels to the handle or canopy can cause the stroller
to be unstable.
Overloading, incorrect folding, and using accessories
other than those approved by Nuna, e.g. child seats, bag
hooks, rain covers, buggy boards, etc., may damage or
make this stroller unsafe.
The parking brake should be engaged when the stroller
is stopped and when placing and removing child.
NEVER allow children to stand on the footrest.
This stroller does not replace a crib or a bed. Should
your child need to sleep, they should be placed in a
crib or approved sleeping area based on your child’s
requirements.
Always check that the seat unit, the bassinet, and car
seat attachment devices are correctly engaged before
use.
IVVI bassinet
The bassinet is suitable for use with children who weigh
up to 20 lbs (9 kg) (birth–6 months) and whose height is
27 in. (68 cm) or less.
FALL HAZARD To help prevent falls, do not use the
bassinet when the infant begins to push up on hands
and knees or has reached 20 lbs (9 kg), whichever
comes rst.
SUFFOCATION HAZARD
Infants have suffocated:
• In gaps between extra padding and side of the
bassinet, and
• On soft bedding.
DO NOT use a sheet or any other bedding products not
provided by Nuna with your bassinet.
USE ONLY the pad provided by manufacturer. NEVER
add a pillow, comforter, or another mattress for padding.
To reduce the risk of SIDS, pediatricians recommend
healthy infants be placed on their backs to sleep, unless
otherwise advised by your physician.
NEVER use this bassinet in a vehicle as a child restraint.
STRANGULATION HAZARD Strings can cause
strangulation! Do not place items with a string around
your child’s neck, suspend strings from this product, or
attach strings to toys.

1110
When using the Bassinet on the IVVI stroller
in Carry Cot Mode
The bassinet when used on the IVVI stroller in carry cot
mode is suitable for use with children who weigh up to
20 lbs (9 kg) (birth–6 months) and whose height is
27 in. (68 cm) or less.
To prevent a hazardous or unstable condition, do not
place more than 3 lb (1.4 kg) in the accessory pocket.
FALL HAZARD Child’s movement can slide bassinet.
NEVER place bassinet near edges of counter tops,
tables, or other elevated surfaces.
SUFFOCATION HAZARD Bassinet can roll over on soft
surfaces and suffocate child. NEVER place bassinet on
beds, sofas, or other soft surfaces.
NEVER leave a child in the bassinet when ascending or
descending stairs or escalators.
IVVI Infant Car Seat Post and Ring Adapters
Use the infant car seat adapters only with the IVVI stroller
and approved Nuna PIPA™infant car seat.
DO NOT exceed the maximum weight limit specied for
the infant car seat.
DO NOT move the stroller by the handle of the infant car
seat.
The infant car seat adapter interface may present a
pinching hazard. Ensure all ngers and appendages are
clear of the infant car seat adapters when attaching the
infant car seat.
DO NOT place any accessories on the handlebar when
using the IVVI stroller with the infant car seat adapters,
as the stroller may become unstable.
Read all instructions provided by the car seat
manufacturer and the stroller manufacturer before use
of the adapters.
IVVI Footmuff
When using the footmuff, always use the safety harness.
The footmuff should not cover the child’s face.
IVVI Child Tray & Toddler Handle
The child tray is not designed to restrain the child; use
the stroller harness at all times.
To prevent a hazardous or unstable condition, do not
place more than 1 lb (0.5 kg) in the child tray.
DO NOT use the child tray or toddler handle to lift or
carry the stroller.
DO NOT use the toddler handle to carry bags or any
heavy items. Any load attached to the toddler handle
affects the stability of the stroller.
DO NOT use the child tray or cup holder for hot foods or
beverages and always wash before/after each use (see
cleaning instructions).

1312
Parts List
Make sure all parts are available before assembly. If any
part is missing, please contact Nuna (see page 39 for
information). No tools are required for assembly.
CHOKING HAZARD: Remove and immediately discard
protective end caps from each wheel and wheel hub axle.
21
x2 x2
6
2
1
23 24 25
3 5
9
7
10
11
12
13
17
16
18
14
19
20
22
IVVI Stroller
1 Front Wheel (x2)
2 Rear Wheel (x2)
3 Infant Car Seat
Post Adapters
4 Infant Car Seat
Ring Adapter
5 Child Tray & Toddler
Handle
6 Stroller
7 Stroller Canopy
8 Head Support
9 Seat Pad
10 Armbar
11 Calf Support
12 Front Wheel
13 Rear Wheel
14 Seat Mount
15 Buckle and Crotch Cover
16 Shoulder Harness Pads
17 Seat Release Button
18 Folding Button
19 Handle Adjustment
Button
20 Storage Basket
21 Brake Lever
22 Stroller Handle
23 Rain Cover
24 Footmuff
25 Stroller Removeable
Basket
IVVI Bassinet
26 Bassinet
27 Cover
28 Accessory Pocket
(maximum load =
3 lbs)
29 Mattress Pad
30 Canopy
31 Handle
32 Release Button
33 Dream Drape
8
15
26 30
33
27
31
32
29
28
4

1514
2
1
1 4
5
6
2
3
2
1
How to Set Up the IVVI stroller
Check that you have all the parts for this product before
using it.
The assembly should be performed only by adults.
Open Stroller
1- Rotate handle up.
2- Align the sides of the seat with the seat mounts.
Place the seat directly down until it clicks into place. A
“click” sound means the seat is assembled completely.
Check that the stroller is completely open before
continuing.
Assemble Front Wheels
3- Insert front wheels into front legs and listen for a “click”
sound. Check that wheels are securely attached by
pulling down.
4- To disassemble front wheel, detach front wheel from
front leg (1) while pressing the release button. (2)
Assemble Rear Wheels
5- Insert rear wheels into rear legs and listen for a “click”
sound. Check that wheels are securely attached by
pulling outward.
6- To disassemble rear wheel, detach rear wheel from rear
leg (1) while pressing the release button. (2)

1716
1
1
2
1
1 4
5
6
2
3
Assemble Canopy
1- Clip the canopy mounts onto the seat.
2- Then close the zippers.
3- To remove the canopy, open the zippers, then remove
the canopy mount.
Assemble Armbar
4- Align the armbar ends with the armbar mounts, and
then insert to lock.
5- To disassemble armbar, press armbar release button
(1), and then pull out the armbar. (2)
6- The completely assembled stroller is shown.

1918
1 4
5
6
2
3
How to Use the IVVI stroller
Secure Child
1- To release the buckle latch, push on center button and
remove the clips.
2- To secure child, assemble buckle.
3- Connect shoulder buckle and hip buckle together as
shown, and together secure in buckle latch.
4- Repeat on opposite side.
5- Fit harness snugly to child by sliding each adjustment
buckle.
Adjust Shoulder Harness Position
6- The shoulder belt can be adjusted up and down.
To avoid serious injury from falling or sliding out, always
secure your child with harness.
Make sure your child is snugly secured. The space
between the child and the shoulder harness should be
about the thickness of one hand.
Do not cross the shoulder belts. This will cause
pressure on your child’s neck.

2120
1 4
5
6
2
3
Switch Seat
The seat can be switched to face front or to face the parent.
1- Squeeze the seat release buttons (1) while lifting the
seat (2).
2- Turn the seat the reverse direction and align the sides
of the seat with the seat mounts. Place the seat directly
down until it clicks into place. A “click sound” means
the seat is assembled completely.
Adjust Recline
There are 3 positions for the backrest.
3- To raise the backrest, squeeze the adjustment button,
and push up. (1) To recline the backrest, squeeze the
adjustment button and pull, then adjust the backrest to
a desired angle. (2)
Canopy Use
4- To open the canopy, pull canopy toward front.
Open the zippers on the canopy to use extra ap. (1)
To fold the canopy, pull canopy toward back.
5- To open the canopy window, roll fabric and secure with
magnet.
Front Swivel Locks
6 - Push down the front swivel locks to lock front wheels
facing forward. It is recommended to use swivel locks
on uneven surfaces.
1
2
1
2
1

2322
1 4
52
3
Brake
1- To lock wheels, step on brake lever and push down.
2- To release wheels, step on the brake lever and push
forward. Always apply brake when stroller is in stopped
position.
Adjust Calf Support
The calf support has 2 positions.
3- To raise the calf support, push it up. To lower calf
support, press the adjustment button in the middle of
footrest (1), and rotate the footrest down. (2)
Adjust Handle
The handle has 6 positions.
4- To adjust the height of the handle, pull the handle up
or down (1) while pulling up on the handle adjustment
button. (2)
Seat Pad
5- When removing the seat pad, open the zippers around
the seat pad.
Use seat pad in cold weather to provide a comfortable
seating area. The seat pad can be removed to provide
a mesh seating area for better ventilation during hot
weather.
Do not remove backrest tube.
2
1
2
1
2

24
Fold Stroller
Remove stroller seat before folding.
1- Lift the folding button (1) and rotate the handle forward (2).
2-Lift the webbing in the basket of the stroller to transport
after folding.
How to Set Up the IVVI Bassinet
Assemble Bassinet
3- Open the wire support on both sides of the bassinet.
Click the wire into the four plastic parts. A ”click” sound
means the wire support is secure. (1)
4- Place the mattress pad into the bassinet and smooth it
down.
Always use the mattress pad when using the bassinet.
Mattress pad cover can easily be removed to wash.
5- Attach the bassinet cover to the bassinet with the
zippers on either side.
25
1
1
2
3
4
5
1
1
2

26 27
1
1
Adjust Canopy
1- Pull canopy towards front end to secure.
Be sure the handle is locked in the forward most upright
position before lifting bassinet by the handle.
Close the canopy by pressing the folding buttons on
both sides. (1)
Canopy Features
2- Fold the rear panel of the bassinet canopy up for more
ventilation.
3- Pull the dream drape out from under the bassinet
canopy.
4- Then secure it to the two sides of the bassinet with
magnets.
How to Use the IVVI Bassinet
with the IVVI Stroller
Attach Bassinet onto Stroller Frame
Align the sides of the bassinet with the seat mounts on the
frame.
5- Place the bassinet directly down until it clicks into
place. A “click” sound means bassinet is assembled
completely.
Do not fold stroller when bassinet is attached.
5
2
3
4

28
29
Remove Bassinet
1- Press release buttons on both sides of bassinet and
then lift up.
Accessories
Not all accessories are included on some models.
IVVI Infant Car Seat Post Adapters*
*car seat not included
2- To attach infant car seat post adapters, place post
adapters onto seat mounts as shown. A “click” sound
means the adapters are locked.
3- To attach infant car seat, place onto post adapters as
shown.
4- A “click” sound means the infant car seat is locked.
5- To remove infant car seat, press the two stroller release
buttons (1) while lifting infant car seat up. (2)
6- To remove post adapters, pull the two stroller release
buttons while lifting the adapters up.
If you have any problems using the infant car seat,
please refer to the infant car seat instruction manual.
Remove infant car seat before folding.
21
2
5
1
2
6
3
4
1
1

3130
1 4
5
6
2
3
IVVI Infant Car Seat Ring Adapter*
*car seat not included
1- Slide the two pieces of the ring adapter together until
you hear a click. Pull outwards on either end to ensure
the attachment is secure.
2- To attach ring adapter, place adapter onto seat mounts
as shown. A “click” sound means the adapter is locked.
3- To attach car seat, place car seat onto ring adapter as
shown. Press down on the car seat and listen for the
“click” to ensure it is locked.
Pull up on the car seat to check that it is securely
locked to the ring adapter and that the adapter is
securely lock to the stroller.
4- Do not attached the ring adapter or car seat as shown.
5- To release the car seat, pull the car seat up (1) while
squeezing the car seat release button (2) located on the
back of the car seat.
6- To remove ring adapter, press to two release buttons (1)
and lift the adapter up (2).
If you have any problems related to using the stroller,
refer to the stroller manufacturer instruction manual.
Remove infant car seat before folding.
1
1
1
2
2
1

3332
1 4
5
6
3
IVVI Stroller Rain Cover
1- To assemble the rain cover, place it over the stroller
seat.
Always check ventilation, when the rain cover is on the
product.
Always check that the rain cover has been cleaned and
dried before folding.
Do not fold the stroller after assembling the rain cover.
Do not place your child into the stroller assembled with
rain cover during hot weather.
IVVI Stroller Footmuff
2- For easier assembly of the footmuff, remove the
shoulder harness pads and crotch pads from the
stroller.
3- Unzip front cover of the footmuff.
4- Before placing footmuff onto stroller seat, open front
cover.
5- Place footmuff on the stroller seat.
6- Pull shoulder harness webbing and buckles (1), hip
harness webbing and buckles (2) and crotch webbing
& buckle (3) through slots on footmuff.
2
1
2
3

3534
2
3
4
1- Reassemble shoulder harness pads and crotch covers
on the stroller.
2- Zip on the front cover of the footmuff.
3- Fold down footmuff ap over the stroller armbar,
securing with magnets.
IVVI Stroller Child Tray & Toddler Handle
4- To attach child tray, align with hole on stroller frame
and push down until it “clicks”. (1)
To attach toddler handle, align with hole on stroller
frame and push down until it “clicks”. (2)
5- Child tray can pivot to desired location.
6- To remove child tray or toddler handle, push release
button (1) and pull up. (2)
6
22
11
5
1
1
2

3736
IVVI Stroller Removeable Basket
1- Open removeable basket.
2- Place removeable basket into stroller basket (1) and
secure around stroller basket with magnets (2).
3- Removeable basket can be used as takeaway storage.
2
3
1
1
2
2

3938
Cleaning and Maintenance
Your IVVI totl system is a valuable piece of equipment and
deserves careful handling.
You can clean the frame, plastic parts, and fabric with a
damp cloth, but do not use abrasives or bleach. Do not use
silicon lubricants as they will attract dirt and grime. Do not
store your stroller in a damp place.
For reasons of safety, only use original Nuna parts.
Refer to the care label attached to the soft goods for
washing and drying instructions.
To ensure long-lasting use, wipe this product off with a soft,
absorbent cloth after using it in rainy weather.
It is normal for fabric to color from sunlight and to show
wear and tear after a long period of use, even when used
normally.
Check regularly if everything functions properly. If any parts
are torn, broken, or missing, stop using this product.
Clean the stroller wheels regularly with water and remove
any dirt.
The child tray and toddler handle is not dishwasher safe.
Wash with lukewarm water and a mild dish soap. Rinse,
then drip dry or towel dry.
Warranty, Product
Registration and Contact
Warranty
We have purposely designed our high-quality products so
that they can grow with both your child and your family.
Because we stand by our product, our gear is covered by
a custom warranty per product, starting from the day it
was purchased. Please have the proof of purchase, model
number and serial number available when you contact us.
For warranty information please visit:
http://www.nuna.eu/warranty
Product Registration
All products include a serial label which lists the product
model number and serial number. This label is located
on the stroller frame and the bassinet. Before contacting
customer service, please have these numbers available for
reference.
To register your product please visit:
https://www.nuna.eu/register-gear
Contact
For replacement parts, service, or additional warranty
questions, please contact our customer service
departments.
In the USA:
[e-mail]
www.nuna.eu
1.855.NUNA.USA (1.855.686.2872)