NuWave OxyPure HEPA 300 User manual

Owner’s Manual
Model 47501 / 47502
Rev.1
Questions or Concerns?
For Amazon Purchases: [e-mail]
For All Other Purchases: [e-mail]
OXYPURE HEPA 300 AIR PURIFIER

4| nuwavenow.com
1. ONLY use the OxyPure for its intended
purpose.
2. To protect against the risk of electrical
shock, DO NOT immerse the cord,
plug, or any part of the OxyPure in
water or any other liquid.
3. Close supervision is necessary
when the OxyPure is used by or
near children. The OxyPure is not
intended for use by children, persons
with reduced physical, sensory, or
mental capabilities, or those who lack
expertise or knowledge of this device.
4. DO NOT operate the OxyPure with
a damaged cord, plug, after any
malfunction, or if the unit has been
dropped or damaged in any way.
Contact Customer Service.
For Amazon purchases:
[e-mail]
For All Other Purchases:
[e-mail]
5. Discard the protective plastic covering
the power plug before use.
6. DO NOT run the cord under carpeting,
throw rugs, runners or other coverings.
7. DO NOT route the cord under furniture
or appliances. Arrange the cord away
from high-trafc areas where it will not
be tripped over.
8. DO NOT plug the OxyPure into an
outlet or power strip that is being used
by other appliances.
9. Remove any dust or water from the
plug, if needed.
10. ALWAYS set up the OxyPure on a at,
stable surface.
11. DO NOT set up the OxyPure where
it could be pushed, kicked, or tripped
over.
12. Leave at least 2-3 feet of space
between the OxyPure’s vents and any
walls.
13. DO NOT install the OxyPure near
a heating device, ammable or
combustible gases or vapors, or in
areas exposed to moisture or water.
14. DO NOT operate the OxyPure on its
side.
15. DO NOT place objects on top of the
OxyPure.
16. DO NOT sit or stand on, or lean
against, the OxyPure.
17. Alteration or modication of any part of
the OxyPure, or the use of attachments
not recommended by the manufacturer,
may cause re, injury, or damage to
property.
18. As with most electrical units, electrical
parts are live even when the OxyPure
is off. Be sure the OxyPure is
unplugged when assembling.
19. DO NOT use the OxyPure in a factory
or industrial setting where machine oil
may be present in the air.
20. Turn the power OFF on the OxyPure
before unplugging the OxyPure.
21. Unplug the OxyPure from the outlet
when the unit is not in use or will be
left unattended for an extended period
of time; before putting on or taking off
IMPORTANT SAFEGUARDS
HOUSEHOLD USE ONLY • READ ALL INSTRUCTIONS BEFORE USE
ALWAYS KEEP THIS MANUAL HANDY FOR FUTURE REFERENCE.
READ ALL INSTRUCTIONS and WARNINGS: The failure to follow any of the important safe-
guards, warnings, or instructions for safe use is a misuse of the OxyPure that can void your warranty
and create the risk of serious injury. When using the OxyPure, basic safety precautions should always
be followed.

nuwavenow.com | 5
parts; when removing or replacing the
lter; and before cleaning.
22. DO NOT operate the OxyPure if
abnormal sounds or motion is detected.
23. If any foreign object comes into contact
with the fan, do not operate. Turn off
and unplug the OxyPure and then
shake the unit to dislodge the foreign
object.
24. Inspect the OxyPure for any loose or
missing parts before and after each
use. If parts are loose, damaged, or
missing, contact Customer Service.
For Amazon Purchases:
[e-mail]
For All Other Purchases:
[e-mail]
25. DO NOT pull, lift, drag, or carry the
OxyPure by its cord.
26. DO NOT block the air inlet or outlet
vents.
27. DO NOT operate the OxyPure without
the lter.
FILTER CHANGING PRECAUTIONS
1. DO NOT try to clean the HEPA/Carbon
lter. Doing so will release dust and
other pollutants back into the air.
2. ALWAYS wear a mask and rubber
gloves when handling a dirty lter.
3. When removing a dirty lter, ALWAYS do
so outside or in a well ventilated area.
IMPORTANT SAFEGUARDS
HOUSEHOLD USE ONLY • READ ALL INSTRUCTIONS BEFORE USE
4. ALWAYS replace your lter with a
NuWave lter made for your model of air
purier.
ELECTRICAL INFORMATION
These servicing instructions are for use
by qualied personnel only. To reduce
the risk of electric shock, do not perform
any servicing other than that contained in
the operating instructions unless you are
qualied to do so.
Power-Supply Cords
A short, detachable power-supply cord is
provided to reduce the risk of becoming
entangled in, or tripping over a longer cord.
Longer detachable power-supply cords or
extension cords are available and may be
used if care is exercised in their use. If a
longer, detachable power-supply cord or
extension cord is used:
1. The marked electrical rating of the exten-
sion cord should be at least as great as
the electrical rating of the appliance.
2. The longer cord should be arranged so
that it will not drape over any counter-top
or tabletop where it could be pulled on or
tripped over unintentionally.
3. The OxyPure should be operated on
a separate electrical outlet from other
operating appliances due to wattage
limitations.
SAVE THESE
INSTRUCTIONS

6| nuwavenow.com
PARTS & ACCESSORIES
TOP
BOTTOM
Keeping your OxyPure up and running with new lters is a breeze.
Ordering new parts and accessories is quick and easy. Have ready down the name and
number for the part you want, then contact Customer Service by emailing:
• For Amazon Purchases: [email protected]
• For All Other Purchases: [email protected]
Or order directly online at: www.nuwavenow.com
ORDERING PARTS
1
2
3
4
5
67
OxyPure HEPA 300
Air Purier
Model #: 47501
Motor
Part #: H0P4
Pre-Filter & Filter
Holder
Part #: H0P1
HEPA/Carbon Filter
Part #: H0A1
Filter Access Lid
Part #:H0P2
Non-Skid Feet
Part #: H0P5
Power Supply
Part #: H0P3
1
2
3
4
5
6
7

nuwavenow.com | 7
1-Button
Control Panel
Air Intake
Vents
Clean Air
Exhaust
Filter Access Lid
Pre-Filter & Filter
Holder
ASSEMBLY
Remember...
ALWAYS remove the
plastic wrapping from the
new lter BEFORE using
it in the OxyPure. Failing
to do so may damage
the motor and other parts of the OxyPure
and may void your warranty.
Removable
Motor Housing
LOCK and
UNLOCK marks.
Power Jack

8| nuwavenow.com
1. Plug the Power Supply cord into the jack at the
back of the OxyPure, and then plug it into a
suitable electrical outlet. The unit will beep once.
2. Press the Power icon. The unit will activate at the
lowest fan speed. It will beep once and the upper-
right LED will light.
3. Press the Power icon again to increase the fan
speed to medium. The unit will beep and the
second LED will light.
4. Press the Power icon again to increase the fan
speed to high. The unit will beep and the third
LED will light.
5. Press the Power icon a fourth time and the
OxyPure will turn off. The unit will beep and the
LEDs will go dark.
Number of Presses Fan Speed Level Bars on Panel Fan Speed (RPM)
1 1 1 400
2 2 2 800
3 3 3 2450
4 OFF 0 OFF
One Button Does it All
Simplicity. That is the secret of the OxyPure HEPA 300 Air
Purier. With only one button, it is simple to operate. With
its revolutionary HEPA/Carbon lter, it is as easy to relax
knowing that your air is as clean as the unit is simple to
maintain. With its lightweight design and construction, it is
easy to take almost anywhere. Simplicity and peace of mind
at the touch of a button.
Low Speed
Fan Speed 1
Fan Speed 2
Medium Speed
Fan Speed 3
High Speed
CONTROL PANEL
View OxyPure® Test and Performance Data” on our
website https://www.nuwavenow.com/shop/oxypure-hepa

nuwavenow.com | 9
It is important to change the HEPA/Carbon Filter regularly.
When the Fan Speed 1 light turns yellow, we suggest replacing your HEPA/
Carbon Filter.
When the Fan Speed 1 light turns red, the HEPA/Carbon Filter has reached
the end of its lifespan and must be replaced.
MAINTAINING THE OXYPURE
TURN UNIT UPSIDE DOWN
After 6 Months
Within 6 Months
After 12 Months
1. Unplug the unit, turn it upside
down and open the Filter Access
Lid.
2. Remove the old lter using the
attached tabs.
3. Remove the new lter from its
packaging. The bag can be used
to discard the old lter.
4. Insert the new lter while ensuring
the tabs are facing up, then close
the Filter Access Lid.
Changing the HEPA/Carbon Filter

10 | nuwavenow.com
Cleaning the OxyPure
Depending on the environment, you may need to clean the OxyPure more often to main-
tain the nish and function of the unit.
• Remove the dirty HEPA/Carbon Filter and place it in a garbage bag.
• Wash the Pre-Filer body of the unit with warm, soapy water, and dry thoroughly before
inserting a clean HEPA/Carbon Filter. Alternatively, you can apply a gentle non-abrasive
cleaner to a cloth and use the cloth to clean the unit.
• Make sure the vents are free of any obstruction.
• Ensure the OxyPure body is completely dry
before reassembling.
• Clean the Motor housing on all sidesides, using
the brush attachment for your vacuum cleaner
or a damp cloth or sponge. Dry it thoroughly
before reassembly.
• DO NOT immerse the Motor housing in water.
The OxyPure Does Not Turn On.
1. The unit is not plugged-in. Plug the unit into an appropriate wall outlet.
2. POWER on the control panel is OFF.
Press POWER.
The Fan Speed Doesn’t Change.
There may be an issue with the control
panel button. Contact Customer Service for assistance.
Airow From the Top Vent is Weak.
The HEPA/Carbon lter is dirty. Change the lter.
The Unit Produces Smoke or Odor.
The HEPA/Carbon lter is dirty. Change the lter.
If any of these problems persist, contact NuWave’s friendly and knowledgeable
Customer Service by emailing:
For Amazon Purchases: [email protected]
For All Other Purchases: [email protected]
TROUBLESHOOTING GUIDE
MAINTAINING THE OXYPURE