Omron E3X-NA - User manual

1E32-@C200 + E3X-NA@V
Ultra-miniature cylindrical photoelectric sensors
E32-@C200 + E3X-NA@V
• Ultra miniature M3, M4 or M6 size for
demanding mounting condition
• Through-beam and diffuse reflective
models
• Plug & Play connection for quick in-
stallation and setup
• High protection amplifier with manual
adjuster for simple adjustment
Sensing Distance
Rating/Performance
Size Shape Type Sensing distance (mm) *1
(Parentheses: With E39-F1 Lens
Unit)
Standardobject
(min. sensing
object*2)
(Parentheses:
Opaque object)
Model Permissible
bending
radius
M4 Through-beam 1.0 mm ø
(0.03 mm ø)
E32-TC200 25 mm
M3 1.0 mm ø
(0.03 mm ø)
E32-TC200A 25 mm
M6 Diffuse reflective 200x200
(0.01 mm ø)
E32-DC200 25 mm
*1. Sensing distance based on white paper.
*2. Indicates values for standard mode.
Item E32-@200
Ambient temperature
Operation -40°C to 70°C (with no icing or condensation)
Storage
Admissible bending radius 25 mm min.
Fiber sheath material Black polyethylene
Protective structure IEC 60529 IP67
Red light
M4 screw
400 (3,000)
M3 screw
360
M6 Screw
150

2 Advanced Photoelectric Sensors
Dimensions
Throughbeam
Diffuse reflective
Ordering Information
Amplifier Units
Pre-wired Connector type
Accessories (Order Separately)
Mounting Brackets End Plate
E32-TC200 E32-TC200A
E32-DC200
M2.6 x 0.45
1.0 ø
Two, hexagon clamping nuts
Two, toothed washers
Sensing head, M4 x 0.7 *
* Nickel-plated brass
2.2-ø optical fiber
3.2 3 2.4
14 2,0007 2,000
41
7(1.5)
5.5
1.0 ø
1.8
3 ø
2.2 ø
Two, hexagon clamping nuts
Two, toothed washers
Sensing head,
M3 x 0.5 *
2.2-ø optical fiber
* Nickel-plated brass
4.8
Two, 1 ø
4 ø
2.43
17 2,000
10
Two, hexagon clamping nuts
Two, toothed washers
Sensing head *
M6 x0.75
Two, 2.2-ø optical fiber
* ADC
Shape Control output Model
NPN output PNP output
ON/OFF output E3X-NA11V E3X-NA41V
Shape Control output Model
NPN output PNP output
ON/OFF output E3X-NA14V E3X-NA44V
Shape Applicable type Model Quantity
E3X-NA#V E39-L148 1
Shape Model Quantity
PFP-M 1

3E32-@C200 + E3X-NA@V
Rating/performance
Amplifier Units
Pre-wired Connector type
Model NPN output
E3X-NA11V E3X-NA14V
Item PNP output E3X-NA41V E3X-NA44V
Light source (wave length) Red LED (680 nm)
Power supply voltage 12 to 24 VDC ±10%, ripple (p-p): 10% max.
Control output Load current 50 mA (residual voltage 1 V max. each) Open collector output type (depends on the NPN/PNP
output format) Light-ON/Dark-ON switch selectable
Response time 200 s max. for operation and reset respectively*1
*1 If 8 or more units are installed side-by-side, the response time is 350 s max.
Timer function OFF-delay timer: 40 ms (fixed)
Ambient temperature
Operating: Groups of 1 to 3 Amplifiers: -25 to +55°C, Groups of 4 to 11 Amplifiers: -25 to +50°C,
Groups of 12 to 16 Amplifiers: -25 to +45°C
Storage: -30 to +70°C (with no icing and condensation)
Vibration resistance 10 to 55 Hz with a 1.5 mm double amplitude for 2 hrs each in X, Y and Z directions
Shock resistance Destruction: 500 m/s2for 3 times each in X, Y, and Z directions
Protective structure IEC 60529 IP66 (with Protective Cover attached)
Connection method Pre-wired models (standard length: 2 m) M8 connector
Material Case PBT (polybutylene terephthalate)
Cover Polyethersulfone (PES)

4 Advanced Photoelectric Sensors
In the interest of product improvement, specifications are subject to change without notice.Cat. No. E35E-EN-01
OMRON EUROPE B.V.
Wegalaan 67-69,
NL-2132 JD, Hoofddorp,
The Netherlands
Phone: [phone]
Fax: [phone]
www.eu.omron.com