Omron V680 - 2 User manual

NEW
V680 Series
RFID System
Next-Generation RFID System
Conforming to ISO/IEC 18000-3
(ISO/IEC 15693).
New ID Sensor Units
for CJ1/CS1 PLCs and New M12 Antenna.
Visualize data transmission on
production lines.
Managing the manufacture of LCDs
and color filters
Managing dies, die histories,
and die service lives
Managing process instructions
and histories for engine
manufacturing
Managing manufacturing process
traceability

Can be used in many countries around the world.
Conforms to ISO/IEC 18000-3 (ISO/IEC 15693)
High-speed transmission of 27 kbps achieved.
The V680 Series offers data transmission speeds as high as 27 kbps at an operating frequency of 13.56 MHz,
and dramatically shortens turn around time (TAT) with a Self-execution Mode that eliminates the need for host
access.
The V680 Series also supports V600-series commands,
so there is no need to change command systems.
These ultra-compact Tags also feature high environmental durability, long service lives,
and maintenance-free operation.
ID Tags can be either embedded in metal or
mounted on non-metallic objects without requiring
any extra attachments.
A long service life enables 10 billion accesses.
A new battery-less model with a large, 32-Kbyte
capacity has been added to the line-up.
In addition to managing the growing amount
of production and quality data on today's factory floors,
this new Tag makes it easy to build a system with
traceability.
The V680 Series features the same level of environmental
durability as the previous V600 Series.
Battery-less
Battery-less
Long service life
Long service life
Battery-less Long service life
10
billion
accesses
Enables High-speed Data Transmission
A Wide Range of ID Tags Available for Various Production Lines
No Changes Needed when Switching from an Existing System
Versatile Functions for Optimal
Use on Production Lines
The V680 Series can be used in many parts of the world because it meets the requirements of radio wave
regulations in Japan, Europe, the U.S.A., Canada, Mexico, Singapore, Malaysia, the Philippines, China, Hong
Kong, Taiwan, and Korea. Contact your OMRON sales representative for details on use in other countries.
Note: The requirements of radio wave regulations have been met in the countries listed above for combinations of a V680-HA63A or V680-HA63B
Amplifier and a V680-HS52, V680-HS63, or V680-HS65 Antenna (application pending in Mexico). The V680-CH and V680-H01 Antennas and
combinations of a V680-HA63A or V680-HA63B Amplifier and a V680-HS51 Antenna meet the requirements of radio wave regulations in Japan, Europe,
the U.S.A., and Canada. Application is in progress in other countries.
Self-execution system
ID Tag
transmission time
Judgment and
instruction
TAT
Conventional system
Host send (command) time Host send (response)
judgment and instruction time
ID Tag
transmission time
Judgment and
instruction
TAT

Easier Startup and Maintenance.
Simpler Operation.
Contributes to higher efficiency for on-site startup and maintenance.
Seven maintenance modes make it easy to diagnose the optimal usage conditions for the V680 RFID System.
Startup is also easier because the system can be checked without having to use a personal computer or other
host device.
Work efficiency is greatly increased because the ID Map Manager includes an ID Tag read/write test function
and communications checking function in addition to memory map definition and editing functions.
Memory map data created by the ID Map Manager can also be easily shared between the production line
design department and the vendors that are building the line.
Using the ID Map Manager dramatically shortens the time required to allocate
ID Tag memory and complete system designs.
Maintenance modes are
quickly switched with
the DIP switch on the
front of the Controller.
The Amplifier Unit is also
equipped with an indicator that
displays the communications
condition, for easy confirmation
from the location nearest the
production line.
V680-A-IMMEG-P01
Lets You Visualize Data Transmission
Strong Support for Creating ID Tag Memory Maps

Distant Close
Little noise Much noise
More than 99 successful
communications
Visualize Data Transmission without the Need for a Host Device.
Perform Simple Diagnosis of Communications Conditions.
Confirms correct mounting positions for the Read/Write Antenna and ID Tag.
The distance between the Read/Write Antenna and ID Tag mounting locations relative to the communications
range is displayed using six levels.
Controller
Controller
Controller
Amplifier Unit
Distance Level Measurement Mode
Confirms spatial noise, noise sources, and noise countermeasure effects.
Measures the ambient noise level and displays it in levels ranging from 00 to 99.
Noise Level Measurement Mode
Confirms the speed of moving ID Tags and the number of usable bytes.
Data is transmitted repeatedly to moving ID Tags, and the number of successful communications and speed
level are displayed in levels ranging from 01 to 99.
(No data is actually written to the ID Tags during the write part of the Speed Level Measurement Mode.)
Speed Level Measurement Mode (Read/Write)
Read/Write
Antenna
Read/Write
Antenna
ID Tag
Movement
Read/Write
Antenna
Distance level “--”
ID Tag
“06”
“05”
“04”
“03”
“02”
“01”

Seven maintenance modes make it easy to diagnose the communications conditions from the front
panel of the Controller or Amplifier Unit. The data can also be output from the USB port of the Controller
to a personal computer or other monitoring device.
(Maintenance Mode cannot be used with the V680-H01 or V680-CH.)
Communications successes: 23
Communications errorNormal communication
Controller
Controller
Confirms the communications success rate between the Read/Write Antenna and ID Tags.
A total of 100 communications are executed without retries, and the rate of communications success is
displayed in levels ranging from 01 to 99.
Confirms communications ability between the Read/Write
Antenna and ID Tags.
The end codes are displayed to show the results of communications
between the Read/Write Antenna and ID Tags. When the Controller
is mounted inside a control panel, or in some other location, this
data can be output from the Controller's USB port and easily
checked on a monitor.
(The Tag Communications Test Mode uses only read operations.)
This mode can be used as a protocol analyzer function for host device communications lines.
The communications commands sent from the host device and the execution result responses can be output
from the USB port of the Controller.
Confirms whether the signals sent from the Controller are being correctly transferred to an external device.
The communications commands and responses between the Controller and a host device are output from the
Controller's USB port for easy identification of problems, such as incorrect communications parameters or wiring.
Communications Success Rate Measurement Mode
Host Device Communications Monitor Mode (Protocol Analyzer Function)
Tag Communications Test Mode
Host Device Communications Confirmation Mode
Read/Write
Antenna
ID Tag
100
communications
Command:
RDSTH100100010*CR
Response:
RD72*CR
Read/Write
Antenna
Monitor:
RDSTH100100010*CR
RD72*CR
Personal computer
Host device
Programmable Controller
(PLC)
Notebook PC
Monitor

6V680 Series RFID System
RFID System
V680 Series
New, Next-generation
RFID Systems with ISO/IEC 18000-3
(ISO/IEC15693) Compliance
• High-speed, 27-kbps transmission response-only
speed of 53 kbps from the V680-D@KF68.
• Read/Write Antennas and ID Tags with excellent
environmental resistance.
• Wide line-up of ultra-compact, long-life ID Tags, with
capacities from 1 to 32 Kbytes.
• Seven modes make it possible to visualize data
transmission.
• ID Map Manager simplifies memory map designing for
ID Tags.
• Complies with FCC Standards and R&TTE Directive.
System Configuration
Note 1. Use a V680-HS51/-HS52 Antenna if the V680-D1KP52MT or V680-D2KF52M is to be embedded in metal. Communications cannot be performed if a V680-
HS63 Antenna is used in combination with the V680-D1KP52MT or V680-D2KF52M.
The V680-HS65 Antenna cannot communicate with V680-D1KP52MT or V680-D2KF52M ID Tags if they are embedded in metal.
2. For details, refer to the following User’s Manuals (Cat. No. Z248, Z249, Z262, and Z274).
3. The maximum total cable length is 62.5 m. It is achieved by connecting an Antenna with a 12.5-m cable, an Amplifier with a 10-m cable, and 20-m Amplifier
Unit Special Extension Cables.
Cylinder type
V680-HS51
V680-HS65
CJ1W-V680C11/C12
CS1W-V680C11/C12
ID Sensor Units
SYAMAC
CJ/CS Series
8-Kbyte/32-Kbyte memory
V680-D8KF68/-D32KF68
(86 ×54 ×10 mm)
For flush mounting on non-metallic surface
ControllerID Tag Amplifier Unit
Personal
computer
Programmable
Controller
Read/Write Antenna
Square type
V680-HS63
Cylinder type
V680-HS52
-W:
-R:
Standard cable,
waterproof
connector
Flexible cable,
non-waterproof
connector
1-channel type
V680-CA5D01-V2
2-channel type
V680-CA5D02-V2
1-Kbyte memory
V680-D1KP52MT
(8 dia. ×5 mm)
For embedding in metallic or non-metallic
surface
1-Kbyte memory
V680-D1KP66MT/V680-D1KP66T
(34 ×34 ×3.5 mm)
For flush mounting on metallic surface
1-Kbyte memory
V680-D1KP66T-SP
(96 ×36.5 ×6.5 mm)
For flush mounting on non-metallic surface
2-Kbyte memory
V680-D2KF52M
(8 dia. ×5 mm)
For embedding in metallic or non-metallic
surface
2-Kbyte memory
V680-D2KF67M/V680-D2KF67
(40 ×40 ×4.5 mm)
For flush mounting on non-metallic surface
For
1-Kbyte ID Tags
V680-HA63A
-W:
-R:
Standard cable,
waterproof
connector
Flexible cable,
non-waterproof
connector
For 2-, 8-, or
32-Kbyte ID Tags
V680-HA63B
Communications
interfaces
RS-232C, RS-422,
RS-485
Amplifier Unit
Special Extension
Cable
V700-A43/-A44
Amplifier Unit
Special Extension
Cable
V700-A43/-A44
Host Device

V680 Series RFID System 7
System Configuration
Connect V680 Read/Write Antennas and Amplifier Units to a V680-series Controller, and read or write data from or to V680-series ID Tags.
Transmission is also possible with ID Tags other than those of the V680 Series as long as they comply with ISO/IEC 18000-3 (ISO/IEC 15693).
However, transmission with ID Tags other than those of the V680 Series cannot be assured. The user must confirm transmission capabilities
carefully prior to use.
ID Sensor Units SYAMAC
CJ/CS Series
Communications
interfaces
RS-232C, RS-422,
RS-485
V680-D1KP66MT/
V680-D1KP66T
V680-D2KF67M/
V680-D2KF67
V680-D1KP66T-SP
1-channel type
CJ1W-V680C11
CS1W-V680C11
1-channel type
V680-CA5D01-V2
Host Device
1-Kbyte memory with
high-temperature
capability
V680-D1KP58HT
V680-H01
Special Cable
V700-A40-W
ControllerID Tag Read/Write Antenna
Personal computer
Programmable
Controller
Personal computer
Programmable
Controller
1-Kbyte memory
V680-D1KP52MT
2-Kbyte memory
V680-D2KF52M
8-Kbyte/32-Kbyte
memory
V680-D8KF68/-D32KF68
Psion Teklogix 7527S-series
Handheld Terminal for
V680-CH1D-PSI
(Recommended model:
V680-A-7527S-G2-EG-S)
V680-CHUD
Handheld Reader Writer
V680-CH1D V600-A22 AC Adapter
(order separately)
V680-CH1D-PSI
RS-232C
interface
(Connector)
RS-232C
interface
(Connector)
USB interface

8V680 Series RFID System
Ordering Information
ID Tag
Read/Write Antenna (Detachable Amplifier Unit Type)
Read/Write Antenna with Built-in Amplifier
Note: Use an Antenna Cable to connect the Read/Write Antenna to the Controller.
The maximum cable length is 30.5 m.
Type Memory capacity Appearance Size Metallic compatibility Model
Battery-less 1 Kbyte Cylindrical,
ultra-compact
8 dia. ×5 mm
For embedding in metallic
or non-metallic surface
V680-D1KP52MT
Square
34 ×34 ×3.5 mm
For flush mounting on
metallic surface
V680-D1KP66MT
For flush mounting on
non-metallic surface
V680-D1KP66T
Square PFA package
95 ×36.5 ×6.5 mm
For flush mounting on
non-metallic surface
V680-D1KP66T-SP
80 dia. ×t10 mm
(High-temperature
type)
For flush mounting on
non-metallic surface
V680-D1KP58HT
2 Kbytes Cylindrical,
ultra-compact
8 dia. ×5 mm
For embedding in metallic
or non-metallic surface
V680-D2KF52M
Square
40 ×40 ×4.5 mm
For flush mounting on
metallic surface
V680-D2KF67M
For flush mounting on
non-metallic surface
V680-D2KF67
8 Kbytes 86 ×54 ×10 mm For flush mounting on
non-metallic surface
V680-D8KF68
32 Kbytes V680-D32KF68
Type Appearance Size Cable length Model
Cylindrical Standard cable,
waterproof connector
M22 ×65 mm 2 m V680-HS52-W 2M
12.5 m V680-HS52-W 12.5M
Flexible cable, non-
waterproof connector
2 m V680-HS52-R 2M
12.5 m V680-HS52-R 12.5M
Standard cable, non-
waterproof connector
M12 ×35 mm 2 m V680-HS51 2M
Square Standard cable,
waterproof connector
40 ×53 ×23 mm 2 m V680-HS63-W 2M
12.5 m V680-HS63-W 12.5M
Flexible cable, non-
waterproof connector
2 m V680-HS63-R 2M
12.5 m V680-HS63-R 12.5M
Standard cable,
waterproof connector
100 ×100 ×30 mm 2 m V680-HS65-W 2M
12.5 m V680-HS65-W 12.5M
Flexible cable, non-
waterproof connector
2 m V680-HS65-R 2M
12.5 m V680-HS65-R 12.5M
Type Appearance Size Cable length Model
Square 250 ×200 ×35 mm 0.5 m (See note.) V680-H01

V680 Series RFID System 9
Amplifier Unit
Note: The maximum extendable cable length is 50 m (including the Amplifier Unit cable). The maximum number of V700-A43/-A44 Amplifier Unit
Special Extension Cables that can be connected is two.
Controller
ID Sensor Units
Note: When connected to the V680-H01: 0.28 A
Handheld Reader Writers
Psion Teklogix Handheld Terminals
Handheld Terminal Set
Type Appearance Size Cable length Model
For 1-Kbyte memory 25 ×40 ×65 mm 5 m V680-HA63A 5M
10 m V680-HA63A 10M
For 2-/8-/32-Kbyte memory 5 m V680-HA63B 5M
10 m V680-HA63B 10M
Type No. of connectable
Amplifiers
Appearance Size Transmission interface Model
DC power supply Single 105 ×90 ×65 mm RS232C,
RS422/RS485
V680-CA5D01-V2
Dual V680-CA5D02-V2
Type Unit name Connected ID System External
power supply
No. of unit
numbers used
Current consumption (A) Model
5 V 24 V External
CJ1
Special
I/O Unit
V680 Series 1 Head --- 1 unit number 0.26 0.13
(See
note.)
--- CJ1W-
V680C11
2 Heads 2 unit number 0.32 0.26 --- CJ1W-
V680C12
Type Unit name Connected ID System External
power supply
No. of unit
numbers used
Current consumption (A) Model
5 V 26 V External
CS1
Special
I/O Unit
V680 Series 1 Head --- 1 Head 0.26 0.13
(See
note.)
--- CS1W-
V680C11
2 Heads 24 VDC 2 Heads 0.32 --- 0.36 CS1W-
V680C12
Name Model
Model with USB connector and 0.8-m cable V680-CHUD 0.8M
Model with USB connector and 1.9-m cable V680-CHUD 1.9M
Model with RS-232C connector and 2.5-m cable
(for use with a personal computer or programmable controller)
V680-CH1D
Model with RS-232C connector and 0.8-m cable
(Recommended: Psion Teklogix Handheld Terminal)
V680-CH1D-PSI
AC Adapter (for V680-CH1D) V600-A22
Name Psion Teklogix model number OMRON model number Set contents
Handheld Terminal Set
(English OS)
7527S-G2-EG-S V680-A-7527S-G2-EG-S Handheld Terminal, RS-232C in-
terface, hand strap, and charger
(standard model)

10 V680 Series RFID System
Accessories (Order Separately)
ID Tag Attachment
Amplifier Unit Special Extension Cable (Amplifier Unit to Controller)
V680-H01 Read/Write Antenna Special Cable (Read/Write Antenna to Controller)
Note: The maximum cable length is 30.5 m. If extending the cable length, connect only one additional cable. (Do not connect more than two cables
together.)
RS-232C Communications Connector ID Map Manager (for Windows)
Note: An RS422/RS485 Communications Connector is provided with the RFID System.
Type Appearance Model
For the V680-D1KP66T V600-A86
For the V680-D@KF68 V680-A81
To mount the V680-D1KP58HT V680-A80
Cable length Appearance Model
10 m V700-A43 10 M
20 m V700-A44 20 M
Cable length Appearance Model
2 m V700-A40-W 2M
5 m V700-A40-W 5M
10 m V700-A40-W 10M
20 m V700-A40-W 20M
30 m V700-A40-W 30M
Name Model
Connector Plug XM3B-0922-111
Connector Hood XM2S-0911
Type Model
English version V680-A-IMMEG-P01

V680 Series RFID System 11
Ratings and Performance
ID Tag (1-Kbyte Memory)
Note 1. Refer to the User's Manual (Cat. No. Z262) for data backup time for temperatures of 85°C or higher. If the V680 has been stored at 125°C
or higher, write the data again even if the data does not need to be changed.
2. 150°C heat resistance: The heat resistance has been checked at 150°C for up to 1,000 hours, and thermal shock has been checked
through testing 1,000 thermal cycles each of 30 minutes at −10/150°C. (Test samples: 22, defects: 0)
3. 180°C heat resistance: The heat resistance has been checked at 180°C for up to 200 hours, and thermal shock has been checked through
testing 200 thermal cycles each of 30 minutes at −10°C/180°C. (Test samples: 22, defects: 0)
4. This OMRON in-house standard confirms resistance to cutting and other oils. It is equivalent to the former JEM standard.
5. For details, refer to the User's Manual (Cat. No. Z262).
ID Tag with 1-Kbyte Memory with High-temperature Capability
Note: The data storage time at high temperatures (110 to 200°C) is 10 hours. Rewrite the data before 10 hours has lapsed.
Item Model V680-D1KP52MT V680-D1KP66T V680-D1KP66MT V680-D1KP66T-SP
Memory capacity 1,000 byte (user area)
Memory type EEPROM
Data backup time (See note 1.) 10 years after writing (85°C max.)
Memory longevity 100,000 times per block (at 25°C)
Ambient operating temperature
(during transmission)
−25 to 85°C (with no icing) −25 to 70°C (with no icing)
Ambient operating temperature
(not during transmission)
−40 to 125°C (with no icing)
Heat resistance: 1,000 thermal cycles each of 30 minutes at −10°C/150°C, High-
temperature storage: 1,000 hours at 150°C (See note 2.)
200 thermal cycles each of 30 minutes at −10°C/180°C, High-
temperature storage: 200 hours at 180°C (See note 3.)
−40 to 110°C (with no
icing)
Ambient storage temperature −40 to 125°C (with no icing) −40 to 110°C (with no
icing)
Ambient operating humidity 35 to 95%
Degree of protection IEC 60529, IP68
In-house standard for antenna oil resistance (former JEM standard equivalent to
IP67g) (See note 4.)
IP67
Vibration resistance 10 to 2,000 Hz, 1.5-mm double amplitude at 150 m/s2acceleration with 10 sweeps in X, Y, and Z directions for
15 minutes each
Shock resistance 500 m/s2in X, Y, and Z directions 3 times each (18 times in total)
Appearance 8 dia. ×5 mm 34 ×34 ×3.5 mm 95 ×36.5 ×6.5 mm
(excluding protrusions)
Materials Case: PPS resin
Filling: Epoxy resin
Molding: PPS resin External resin: PFA
Tag body: PPS resin
Weight Approx. 0.5 g Approx. 6 g Approx. 7.5 g Approx. 20 g
Metallic compatibility Yes No Yes No
Item Model V680-D1KP58HT
Memory capacity 1,000 byte (user area)
Memory type EEPROM
Data backup time 10 years after writing (See note.)
Memory longevity 100,000 times per block (at 85°C)
Ambient operating temperature
(during transmission)
−10 to 85°C (with no icing)
Ambient operating temperature
(not during transmission)
−40 to 110°C (with no icing)
Heat resistance: 2,000 thermal cycles each of 30 minutes at room temperature/200°C (Refer to Heat
Resistance, below, for details.)
Ambient storage temperature −40 to 110°C (with no icing)
Ambient operating humidity No limits.
Degree of protection IEC 60529, IP67
Vibration resistance 10 to 2,000 Hz, 3.0-mm double amplitude at 150 m/s2acceleration with 10 sweeps in X, Y, and Z directions for
15 minutes each
Shock resistance 500 m/s2in X, Y, and Z directions 3 times each (18 times in total)
Materials PPS resin
Weight Approx. 90 g

12 V680 Series RFID System
Heat Resistance
Sufficient heat resistance has been confirmed by evaluation testing comprising 2,000 thermal cycles each of 30 minutes at room temperature/
200°C (Criterion: LTPD 10%).
The lifetime of the V680-D1KP58HT is affected by high-temperature storage, due to the effects of high temperatures on internal components. For
details on the relationship between heat resistance and lifetime, refer to the User's Manual (Cat. No. Z221).
ID Tag (2-Kbyte Memory)
Note 1. Refer to the User's Manual (Cat. No. Z248) for data backup time for temperatures of 55°C or higher.
2. The total Read or Write communication frequency is called the access frequency.
3. This OMRON in-house standard confirms resistance to cutting and other oils. It is equivalent to the former JEM standard.
4. For details, refer to the User’s Manual (Cat. No. Z248).
ID Tag with 8-/32-Kbyte Memory
Note 1. Refer to the User’s Manual (Cat. No. Z248) for data backup time for temperatures of 70°C or higher.
2. The total Read or Write communication frequency is called the access frequency.
3. This OMRON in-house standard confirms resistance to cutting and other oils. It is equivalent to the former JEM standard.
4. For details, refer to the User’s Manual (Cat. No. Z248).
Item Model V680-D2KF52M V680-D2KF67 V680-D1KF67M
Memory capacity 2,000 bytes (user area)
Memory type FRAM
Data backup time (See note 1.) 10 years after writing (55°C or less)
Memory longevity 10 billion times per block. Access frequency (See note 2.): 10 billion times
Ambient operating
temperature
−25 to 85°C (with no icing)
Ambient storage temperature −40 to 85°C (with no icing)
Ambient operating humidity 35 to 95% 35 to 85%
Degree of protection IEC 60529, IP67
In-house standard for antenna oil resistance (former JEM standard equivalent to IP67g) (See note 3.)
Vibration resistance 10 to 2,000 Hz, 1.5-mm double amplitude at 150 m/s2acceleration with 10 sweeps in X, Y, and Z directions for
15 minutes each
Shock resistance 500 m/s2in X, Y, and Z directions 3 times each (18 times in total)
Appearance 8 dia. ×5 mm 40 ×40 ×4.5 mm
Materials Case: PPS resin
Filling: Epoxy resin
Molding: ABS resin
Filling: Epoxy resin
Weight Approx. 0.5 g Approx. 6.5 g Approx. 7 g
Metallic compatibility Yes No Yes
Item Model V680-D8KF68 V680-D32KF68
Memory capacity 8,192 bytes (user area) 32,744 bytes (user area)
Memory type FRAM
Data backup time (See note 1.) 10 years (at 70°C max.) after data is written
Memory longevity 10 billion times per block at 85°C max. Access frequency (See note 2.): 10 billion times
Ambient operating
temperature
−20 to 85°C (with no icing)
Ambient storage temperature −40 to 85°C (with no icing)
Ambient operating humidity 35 to 85%
Degree of protection IEC 60529, IP67
In-house standard for antenna oil resistance (former JEM standard equivalent to IP67g) (See note 3.)
Vibration resistance 10 to 500 Hz, 1.5-mm double amplitude at 100 m/s2acceleration with 10 sweeps in X, Y, and Z directions for
11 minutes each
Shock resistance 500 m/s2in X, Y, and Z directions 3 times each (18 times in total)
Dimensions 86 ×54 ×10 mm
Materials Case: PBT resin
Filling: Epoxy resin
Weight Approx. 50 g
Metallic compatibility No

V680 Series RFID System 13
Cylindrical Read/Write Antenna (Detachable Amplifier Unit Type)
Note 1. The degree of protection for the Connector is IP67/IP65. This OMRON in-house standard confirms resistance to cutting and other oils. It
is equivalent to the former JEM standard.
2. The Connector is not waterproof. This OMRON in-house standard confirms resistance to cutting and other oils. It is equivalent to the former
JEM standard.
3. For details, refer to the User’s Manual (Cat. No. Z248 or Z262).
Square Read/Write Antenna (Detachable Amplifier Unit Type)
Note 1. The degree of protection for the Connector is IP67/IP65. This OMRON in-house standard confirms resistance to cutting and other oils. It
is equivalent to the former JEM standard.
2. The Connector is not waterproof. This OMRON in-house standard confirms resistance to cutting and other oils. It is equivalent to the former
JEM standard.
3. For details, refer to the User’s Manual (Cat. No. Z248 or Z262).
Model
Item
V680-HS52-W
(Standard Cable, Waterproof
Connector)
V680-HS52-R
(Flexible Cable, Non-waterproof
Connector)
V680-HS51
(Standard Cable, Non-waterproof
Connector)
Ambient operating temperature −10 to 60°C (with no icing)
Ambient storage temperature −25 to 75°C (with no icing)
Ambient operating humidity 35% to 95% (with no condensation)
Insulation resistance 20 MΩmin. (at 500 VDC) between the cable terminals and the case
Dielectric strength 1,000 VAC (50/60 Hz) for 1 minute between the cable terminals and the case with a current leakage of 5 mA max.
Degree of protection IP67 (IEC60529)
In-house standard for antenna oil
resistance (former JEM standard
equivalent to IP67g) (Read/Write
Antenna portion) (See note 1.)
IP67 (IEC60529)
In-house standard for antenna oil resistance (former JEM standard equivalent
to IP67g) (Read/Write Antenna portion) (See note 2.)
Vibration resistance 10 to 500 Hz variable vibration, 1.5-mm double amplitude at 100 m/s2
acceleration, with 10 sweeps in X, Y, and Z directions for 8 minutes each
10 to 2,000 Hz variable vibration, 1.5-
mm double amplitude at 150 m/s2
acceleration, with 10 sweeps in X, Y,
and Z directions for 15 minutes each
Shock resistance 500 m/s2in X, Y, and Z directions 3 times each (18 times in total) 1,000 m/s2in X, Y, and Z directions 3
times each (18 times in total)
Appearance M22 ×65 mm M12 ×35 mm
Materials ABS, brass, epoxy resin filling
Weight Approx. 850 g (with 12.5-m cable) Approx. 55 g (with 2-m cable)
Model
Item
V680-HS63-W
(Standard Cable, Waterproof Connector)
V680-HS63-R
(Flexible Cable, Non-waterproof Connector)
Ambient operating temperature −10 to 60°C (with no icing)
Ambient storage temperature −25 to 75°C (with no icing)
Ambient operating humidity 35% to 95% (with no condensation)
Insulation resistance 20 MΩmin. (at 500 VDC) between the cable terminals and the case
Dielectric strength 1,000 VAC (50/60 Hz) for 1 minute between the cable terminals and the case with a current leakage of 5 mA max.
Degree of protection IP67 (IEC60529)
In-house standard for antenna oil resistance (former JEM
standard equivalent to IP67g) (Read/Write Antenna
portion) (See note 1.)
IP67 (IEC60529)
In-house standard for antenna oil resistance (former JEM
standard equivalent to IP67g) (Read/Write Antenna
portion) (See note 2.)
Vibration resistance 10 to 500 Hz variable vibration, 1.5-mm double amplitude at 100 m/s2acceleration, with 10 sweeps in X, Y, and Z
directions for 11 minutes each
Shock resistance 500 m/s2in X, Y, and Z directions 3 times each (18 times in total)
Appearance 40 ×53 ×23 mm
Materials ABS, epoxy resin filling
Weight Approx. 850 g (with 12.5-m cable)
Model
Item
V680-HS65-W
(Standard Cable, Waterproof Connector)
V680-HS65-R
(Flexible Cable, Non-waterproof Connector)
Ambient operating temperature −25 to 70°C (with no icing)
Ambient storage temperature −40 to 85°C (with no icing)
Ambient operating humidity 35% to 95% (with no condensation)
Insulation resistance 20 MΩmin. (at 500 VDC) between the cable terminals and the case
Dielectric strength 1,000 VAC (50/60 Hz) for 1 minute between the cable terminals and the case with a current leakage of 5 mA max.
Degree of protection In-house standard for antenna oil resistance (former JEM
standard equivalent to IP67g) (Read/Write Antenna
portion) (See note 1.)
In-house standard for antenna oil resistance (former JEM
standard equivalent to IP67g) (Read/Write Antenna
portion) (See note 2.)
Vibration resistance 10 to 500 Hz variable vibration, 1.5-mm double amplitude at 100 m/s2acceleration, with 10 sweeps in X, Y, and Z
directions for 11 minutes each
Shock resistance 500 m/s2in X, Y, and Z directions 3 times each (18 times in total)
Appearance 100 ×100 ×30 mm
Materials ABS, epoxy resin filling
Weight Approx. 1,100 g (with 12.5-m cable)

14 V680 Series RFID System
Square Read/Write Antenna with Built-in Amplifier
Note 1. Use an Antenna Cable to connect the Read/Write Antenna to the Controller.
The maximum cable length is 30.5 m. If extending the cable length, connect only one additional cable. (Do not connect more than two
cables together.)
2. For details, refer to the User’s Manual (Cat. No. Z221).
Amplifier Unit
Note 1. When connected to the V680-HS63-R or V680-HS52-R.
2. When connected to the V680-HS63-W or V680-HS52-W. (Not including the Connector on the Controller.)
3. The maximum extendable cable length is 50 m (including the Amplifier Unit Cable). The maximum number of cables that can be connected
is two.
4. For details, refer to the User’s Manual (Cat. No. Z248 or Z262).
Item Model V680-H01
Ambient operating temperature −10 to 55°C (with no icing)
Ambient storage temperature −35 to 65°C (with no icing)
Ambient operating humidity 35% to 85% (with no condensation)
Ambient storage humidity 35% to 95% (with no condensation)
Insulation resistance 20 MΩmin. (at 100 VDC) between the back plate and the case
Dielectric strength 1,000 VAC (50/60 Hz) for 1 minute between the back plate and the case with a current leakage of 1 mA max.
Degree of protection IEC 60529: IP63 (Mounting direction: Transmission surface facing up)
Vibration resistance 10 to 150 Hz variable vibration, 0.7-mm double amplitude with 4 sweeps in X, Y, and Z directions for 8 minutes
each
Shock resistance 150 m/s2in X, Y, and Z directions 3 times each
Weight Approx. 900 g
Cable length 0.5 m (See note 1.)
Item Model V680-HA63A V680-HA63B
Ambient operating temperature −10 to 55°C (with no icing)
Ambient storage temperature −25 to 65°C (with no icing)
Ambient operating humidity 35% to 85% (with no condensation)
Insulation resistance 20 MΩmin. (at 500 VDC) between the cable terminals and the case
Dielectric strength 1,000 VAC (50/60 Hz) for 1 minute between the cable terminals and the case with a current leakage of 5 mA
max.
Degree of protection IP40 (IEC60529) (See note 1.) IP67/IP65 (IEC60529) (See note 2.)
Vibration resistance 10 to 500 Hz variable vibration, 1.5-mm double amplitude at 100 m/s2acceleration, with 10 sweeps in X, Y,
and Z directions for 11 minutes each
Shock resistance 500 m/s2in X, Y, and Z directions 3 times each (18 times in total)
Appearance 25 ×40 ×65 mm (not including projections)
Material Polycarbonate (PC) resin
Weight Approx. 650 g (with 10-m cable)
Cable length 5 m, 10 m (See note 3.)
Transmittable ID Tags 1-Kbyte memory 2-, 8-, 32-Kbyte memory

V680 Series RFID System 15
Controller
Note: For details, refer to the User's Manual (Cat. No. Z249).
ID Controller Communications Specifications
ID Controller Input Specifications
(RST, TRG1, and TRG2)
ID Controller Output Specifications
(RUN, BUSY/OUTS, ERROR/OUT4, OUT1,
and OUT2)
Note 1. When RST input is ON, the CPU halts operation and the RST
LED lights. The ERROR output is then reset.
2. Short-circuiting in a no-load condition may cause transistor
damage.
■USB Port
The USB port is used for a simple connection with a personal computer using a USB cable. The port complies with USB 1.1, and the USB cable
uses a series A or series mini-B connector. A USB port driver must be separately provided. Consult with your OMRON representative for details.
When connected to a host device via USB, the communications will use 1:1 protocol regardless of the setting of DIP switches 3 to 9.
The USB port is not used for control purposes. When building a system, be sure to provide an RS-232C port or RS-422/RS-485C port.
Item Model V680-CA5D01-V2 V680-CA5D02-V2
Power supply voltage
Power consumption
24 VDC (−15% to +10%)
15 W max., 0.8 A max.
Ambient operating temperature −10 to 55°C (with no icing)
Ambient operating humidity 25% to 85% (with no condensation)
Ambient storage temperature −25 to 65°C (with no icing)
Ambient storage humidity 25% to 85% (with no condensation)
Insulation resistance 20 MΩmin. (at 500 VDC) applied as follows:
(1) Between power supply terminals and grounded case
(2) Between ground and terminals
Dielectric strength 1,000 VAC (50/60 Hz) for 1 minute
(1) Between power supply terminals and grounded case
(2) Between ground and terminals
Degree of protection Panel mounted (equivalent to IP20)
Vibration resistance 10 to 150 Hz variable vibration, 0.2-mm double amplitude at 15 m/s2acceleration, with 10
sweeps in X, Y, and Z directions for 8 minutes each
Shock resistance 150 m/s2
Appearance 105 ×90 ×65 mm (not including projections)
Material Polycarbonate (PC) resin, ABS resin
Weight Approx. 300 g
Mounting method DIN Track or M4 screws
Connectable Amplifier Units 12
Item Specifications
RS-232C RS-422/RS-485
Connector specifications 9-pin D-Sub connector with threaded socket:
M2.6
5-pin connector mfd. by Phoenix Contact:
MC1.5/5GF-3.5
Transmission method Half-duplex serial 4-wire/2-wire half-duplex serial
Transmission speed 9,600/19,200/38,400/115,200 bps
Data length 7 or 8 bits
Stop bit length 1 or 2 bits
Error detection Parity (even/odd/none)
Cable length 15 m max. 500 m max.
Input voltage 24 VDC (+10% to −15%, including ripple)
(PNP and NPN compatible)
Input impedance 2.2 kΩ
Input current 10 mA TYP (24 VDC)
ON voltage 19 V min.
OFF voltage 5 V max.
Input response 70 ms max.
Maximum
switching
capacity
24 VDC (+10% to −15%, including ripple)
100-mA photoMOS output (PNP and NPN
compatible)
Leakage current 100 µA max.
Residual voltage 2.0 V max.

16 V680 Series RFID System
ID Sensor Units
Note: When connected to the V680-H01: 280 mA
Functional Specifications of ID Sensor Units
Note 1. Cannot be used for communications with the V680-D1KP@@.
2. For details, refer to the User's Manual (Cat. No. Z248 or Z262).
Handheld Reader Writers
Note 1. Refer to the User's Manual (Cat. No. Z272) for details.
2. This does not include the connector section. The main unit is not resistant to chemical or oils.
Item Model CJ1W-V680C11 CJ1W-V680C12 CS1W-V680C11 CS1W-V680C12
Current
consumption
Internal: 5 V 260 mA 320 mA 260 mA 320 mA
Internal:
24 V/26 V
130 mA (See note.) 260 mA 125 mA (See note.) ---
External: 24 V --- --- --- 360 mA
Dielectric strength 1,000 VAC for 1 minute
Insulation resistance 20 mΩmin. at 500 VDC
Ambient operating
temperature
0 to 55°C
Ambient operating humidity 10% to 90% (with no condensation)
Ambient storage temperature −20 to 75°C
Degree of protection Mounted in panel (IP30)
Vibration resistance 10 to 57 Hz variable vibration, 0.075-mm double amplitude and 57 to 150 Hz variable vibration at 9.8 m/s2
acceleration, with 10 sweeps in X, Y, and Z directions for 8 minutes each
Shock resistance 147 m/s2in X, Y, and Z directions 3 times each
Appearance 31 ×65 ×90 mm (excluding protrusions) 35 ×130 ×101 mm (excluding protrusions)
Item Model CJ1W-V680C11 CJ1W-V680C12 CS1W-V680C11 CS1W-V680C12
Communications control
protocol
Special protocol for CS1 and CJ1 PLCs
Number of Read/Write Head
connections
1212
Commands Supported commands: Read, Write, Bit Set/Bit Clear, Mask Bit Write, Calculation Write, Data Fill, Data Check,
Number of Writes Control, Copy, Read with Error Correction/Write with Error Correction, UID Read, and Noise
Measurement.
The following communications options are supported: Single trigger, Single auto, Repeat auto, FIFO trigger, FIFO
repeat (See note.), Multi-access trigger, and Multi-access repeat (See note.)
Data transfer quantity 2,048 bytes max. (160 bytes/scan)
Diagnostic function (1) CPU watchdog timer
(2) Communications error detection with ID Tag
(3) Antenna power supply error
Monitoring/testing
functions
Tag communications can be tested in Test Mode. Status is displayed by LED indicators.
Number of allocated words 10 words 20 words 10 words 20 words
Item Model V680-CHUD 0.8M V680-CHUD 1.9M V680-CH1D V680-CH1D-PSI
Power supply voltage 5 VDC±5%
Current consumption 500 mA max. (for a power supply voltage of 5.0 V)
Insulation resistance 50 MΩmin. (at 500 VDC) between connector and case
Dielectric strength 1,000 VAC, 50/60 Hz for 1 min (leakage current: 1 mA max.) between connectors and case
Vibration resistance Destruction: 10 to 150 Hz, 0.2-mm double amplitude, with 10 sweeps for 8 min each in 6 directions
Shock resistance Destruction: 150 m/s2, 3 times each in X, Y, and Z directions
Ambient operating
temperature during
communication
0 to +40°C
Ambient operating humidity
during communication
35% to 85% (with no condensation)
Ambient storage
temperature
−25 to +65°C
Ambient storage humidity 35% to 85% (with no condensation)
Degree of protection IEC 60529: IP63 (See note 2.)
Cable length 0.8m1.9m2.5m0.8m
Weight Approx. 110 g
(including connector and
cable)
Approx. 140 g
(including connector and
cable)
Approx. 170 g
(including connector and
cable)
Approx. 120 g
(including connector and
cable)

V680 Series RFID System 17
AC Adapter (for V680-CH1D)
Host Communications Interface
Specifications
USB interface
Note: Used as the COM port on the host device.
RS-232C interface
Note 1. To convert to a 25-pin connector, use the Sunhayato SGC-X9P/25P-2 or the equivalent.
2. Set using a setting command.
■Psion Teklogix Handheld Terminals Recommended for the V680-CH1D-PSI
A V680-CH1D-PSI Psion Teklogix Handheld Terminals is recommended for the V680 Handheld Reader Writer. This Handheld Terminal is
available from OMRON.
■Ordering Information
Psion Teklogix Handheld Terminals
Handheld Terminal Set
Handheld Terminal Only
Item Model V600-A22
Input voltage 100 to 120 VAC at 50/60 Hz
Input current 100 VAC: 200 mA ±20%, 120 VAC: 170 mA ±20%
Output voltage 5 VDC ±0.25 V
Ambient operating
temperature
0 to 40°C (with no icing)
Ambient storage
temperature
−40 to 70°C (with no icing)
Ambient operating
humidity
25% to 85% (with no condensation)
Insulation resistance 100 MΩmin. (at 500 VDC) between input terminals and output terminals
Dielectric strength 1,500 V for 1 minute between input terminals and output terminals with a current leakage of 5 mA max.
Weight Approx. 85 g
Applicable standards UL/CSA
Item Model V680-CHUD
Interface connector Series A plug
USB version Ver 1.1
Communications
speed
Full speed (12 Mbps)
Device class COM class (See note.)
Item Model V680-CH1D V680-CH1D-PSI
Connector D-SUB 9-pin
(compatible with IBM
PC/AT or compatible)
(See note 1.)
D-SUB 9-pin
Standards RS-232C
Transmission
path connections
1:1
Communications
method
2-wire half-duplex
Synchronization Start-stop (stop bits = 1 or 2) (See note 2.)
Baud rate 2,400, 4,800, 9,600, 19,200, or 38,400 bps (See
note 2.)
Transmission
code
ASCII (7-bit) or JIS8 (See note 2.)
Communications
control
procedure
1:1 protocol
Error detection Vertical parity (even, odd, or none) (See note 2.)
Name Psion Teklogix model
number
OMRON model number Configuration
Handheld Terminal Set
(English OS)
7527S-G2-EG-S V680-A-7527S-G2-EG-S Handheld Terminal, RS-232C
interface, hand strap, and
charger (standard model)
Name Appearance Size Psion Teklogix
model number
OMRON model number Configuration
Handheld Terminal
(English OS)
90 × 210 × 42 mm 7527S-G2-EG V680-A-7527S-G2-EG Handheld Terminal,
RS-232C interface,
and hand strap

18 V680 Series RFID System
Handheld Terminal Accessories
Name Appearance Size Psion Teklogix model number OMRON model number
High-capacity Battery 55 × 35 × 18 mm WA3006 V680-A-WA3006
Charger
(standard model)
Adapter: 48 × 70 × 27 mm
Cable: 1,800 mm
CA1053 V680-A-CA1053
Charger
(advanced model)
Charger: 168 × 185 × 110 mm
Enclosed USB cable: 1,500 mm
WA4003 V680-A-WA4003
Carrying Case Handheld Reader Writer Cover:
85 × 200 × 50 mm
Strap: 150 mm
WA6197 V680-A-WA6197

V680 Series RFID System 19
■Ratings and Specifications
Psion Teklogix Handheld Terminal
Note: The Easy Access demonstration software is preinstalled on the V680 and V600.
Charger (Standard Model)
Model
Item
Psion Teklogix model 7527S-G2-EG
(V680-A-7527S-G2-EG)
OS Windows CE 5.0
OS language English
CPU EXA2705 (520 MHz)
Memory Flash ROM: 128 MB, RAM: 128 MB
Display Color, 1/4 VGA, 240×320
Keyboard Alphanumeric
Card slots One CF (Type II Compact Flash) slot and one SD memory card slot
Power supply (main battery) One high-capacity lithium ion battery (3,000 mA/h at 3.7 V)
Host communications
interface
RS-232C (Can be connected to the V680-CH1D-PSI.)
Ambient operating
temperature
−10 to 50°C
Ambient operating humidity 5% to 95% (with no condensation)
Ambient storage
temperature
−40 to 60°C
Drop strength 1.5 m on concrete
Degree of protection IP65 (IEC 60529)
Dimensions 210 × 90 × 42 mm
Weight 390 g (excluding battery)
Standards CE, UL 60950-1, CSA C22.2 No. 60950-1 CCC, and RoHS (AC Adapter for the charger)
Model
Item
Psion Teklogix model CA1053
(V680-A-CA1053)
Input voltage 100 to 240 VAC at 50/60 Hz
Input current 0.6 A
Ambient operating
temperature
−10 to 50°C
Ambient storage
temperature
−25 to 65°C
Insulation resistance 2 kΩ
Dielectric strength 450 V
Weight Approx. 362 g
Applicable standards UL/CSA, CE

20 V680 Series RFID System
■Performance Specifications
ID Tag (1-kbyte Memory) Transmission
Note 1. When mounting the V680-HS65, be sure to attach the Mounting Brackets at the base of the Antenna.
The enclosed Mounting Brackets do not need to be used, however, if the mounting brackets on the Antenna are metal plates and their
dimensions are larger than the dimensions of the Antenna (100 × 100 mm).
For details, refer to the User's Manual (Cat. No. Z248 or Z262).
2. The transmission distance may be reduced if the V680-D1KP66T or V680-D1KP58HT is mounted onto a metallic surface. Refer to the
User's Manual (V680-D1KP@@: Cat. No. Z262, V680-D1KP58HT: Cat. No. Z221) for details.
Recommended combination Function Transmission distance
(unit: mm)
ID Tag and Read/Write Antenna mounting
conditions
ID Tag Read/Write Antenna
V680-D1KP52MT V680-HS52 Read
distance
0 to 9.0 mm
(axial deviation ±2)
Write
distance
0 to 8.5 mm
(axial deviation ±2)
V680-HS51 Read
distance
0.5 to 6.5 mm
(axial deviation ±2)
Write
distance
0.5 to 6.0 mm
(axial deviation ±2)
V680-D1KP52MT
(embedded in metallic
surface: steel)
V680-HS52 Read
distance
0 to 4.5 mm
(axial deviation ±2)
Write
distance
0 to 4.0 mm
(axial deviation ±2)
V680-HS51 Read
distance
0.5 to 3.5 mm
(axial deviation ±2)
Write
distance
0.5 to 3.5 mm
(axial deviation ±2)
V680-D1KP52MT V680-HS63 Read
distance
0 to 12.0 mm
(axial deviation ±2)
Write
distance
0 to 9.5 mm
(axial deviation ±2)
V680-D1KP52MT
V680-HS52
Non-metallic Non-metallic
(
Resin,
p
lastic, wood, etc.
)
V680-D1KP52MT
V680-
HS51
Metallic
Non-metallic
(Resin, plastic, wood, etc.)
Non-metallic V680-D1KP52MT
V680-HS52
Metalli
c
Metallic
V680-D1KP52MT
Metalli
c
V680-
HS51
Non-metallic
(Resin, plastic, wood, etc.)
V680-HS63
V680-
D1KP52MT
Non-metallic