Optika B-60 Series User manual

Model
B-61V
B-62V
B-60 Series
INSTRUCTION MANUAL
Ver. 1.0 2022

Page 2
1. Warning 3
2. Safety Information 3
3. Package content 4
3.1 B-61V 4
3.2 B-62V 5
4. Unpacking 6
5. Intended use 6
6. Symbols and conventions 6
7. Instrument description 7
7.1 B-61V 7
7.2 B-62V 8
8. Assembling 10
8.1 Microscope assembling 10
8.2 Assembling the digital head 10
8.3 Polarizing set (optional) 11
9. Use of the microscope 12
9.1 Switching the microscope 12
9.2 Light intensity adjustment 12
9.3 Stage 12
9.4 Aperture diaphragm 13
9.5 Use with rechargeable batteries 13
9.6 Battery replacement 13
9.7 Use of the locking screw 13
9.8 Use of the mirror (only B-61V) 14
9.9 Useofdi󰀨usinglter 14
9.10 Use of the polarizer (optional) 14
10. Use of the digital head 15
10.1 Operation procedure 15
10.1.1 Connect the power adapter to the camera 15
10.1.2 Use of the rear buttons 15
10.1.3 Snap 15
10.2 Menu and Functions 16
10.3 Operating Instructions 17
10.3.1 White Balance 17
10.3.2 Exposure 17
10.3.3 Line Measurement 18
a) Cross Line 18
b) Calibration 18
c) Measurement 19
10.3.4 Color Adjustment 19
10.3.5 Record Video 19
10.3.6 Other Functions 20
a) Monochrome 20
b) Flip 20
c) Field of View (FOV) 20
10.3.7 Other Settings 20
a) Power Frequency 20
b) SD Management 21
c) Timed Snap 21
d) Language 21
e) Factory Reset 22
f) Software Upgrade 22
f.1) System normally upgraded 22
f.2) System upgrade failed 22
g) Version 23
10.4 Failure analysis and troubleshooting 23
11. Maintenance 24
12. Troubleshooting 25
Equipment disposal 26
Table of contents

Page 3
1. Warning
This microscope is a scientic precision instrument designed to last for many years with a minimum of maintenance. It
is built to high optical and mechanical standards and to withstand daily use. We remind you that this manual contains
important information on safety and maintenance, and that it must therefore be made accessible to the instrument users.
We decline any responsibility deriving from incorrect instrument use uses that does not comply with this manual.
2. Safety Information
Avoiding Electrical Shock
Before plugging in the power supply, make sure that the supplying voltage of your region matches with the operation voltage
of the equipment and that the lamp switch is in o󰀨 position. Users should observe all safety regulations of the region. The
equipment has acquired the CE safety label. However, users have full responsibility to use this equipment safely. Please
follow the guidelines below, and read this manual in its entirety to ensure safe operation of the unit.

Page 4
3. Package content
3.1 B-61V
① Frame
② Monocularobservationhead
③ Eyepiece
④ Objectives(4X/10X/40X)
⑤ Dustcover
⑥ Powersupplyformicroscope
⑦ Camera+display
⑧ Powersupplyfordisplay
⑨ SDcard+SDcardreader
⑩ Cameraadapter
⑪ Filterholder+diusinglter
③
④
⑤⑥
⑦
①
②
⑧
⑨
⑩⑪
⑩

Page 5
3.2 B-62V
① Frame
② Monocularobservationhead
③ Eyepiece
④ Objectives(4X/10X/40X)
⑤ Dustcover
⑥ Powersupplyformicroscope
⑦ Camera+display
⑧ Powersupplyfordisplay
⑨ SDcard+SDcardreader
⑩ Cameraadapter
⑪ Filterholder+diusinglter
③
⑤⑥
①
②
⑧
⑨
⑪
④
⑦
⑩

Page 6
4. Unpacking
The microscope is housed in a moulded Styrofoam container. Remove the tape from the edge of the container and lift the
top half of the container. Take some care to avoid that the optical items (objectives and eyepieces) fall out and get dam-
aged. Using both hands (one around the arm and one around the base), lift the microscope from the container and put it
on a stable desk.
Do not touch with bare hands optical surfaces such as lenses, lters or glasses. Traces of grease or other
residuals may deteriorate the nal image quality and corrode the optics surface in a short time.
5. Intended use
Standard models
For research and teaching use only. Not intended for any animal or human therapeutic or diagnostic use.
IVD Models
Also for diagnostic use, aimed at obtaining information on the physiological or pathological situation of the subject.
6. Symbols and conventions
The following chart is an illustrated glossary of the symbols that are used in this manual.
CAUTION
This symbol indicates a potential risk and alerts you to proceed with caution.
ELECTRICAL SHOCK
This symbol indicates a risk of electrical shock.

Page 7
FINE
FOCUS KNOB
CAMERA
DISPLAY
MAIN SWITCH / INTENSITY
ADJUSTMENT DIAL
CONDENSER
STAGE
NOSEPIECE
OBJECTIVES
STAGE CLIPS
COARSE
FOCUS KNOB
TRANSPORT
HANDLE
7. Instrument description
7.1 B-61V

Page 8
SLIDE HOLDER
STAGE
CONDENSER
MAIN SWITCH / INTENSITY
ADJUSTMENT DIAL
NOSEPIECE
FINE
FOCUS KNOB
COARSE
FOCUS KNOB
DISPLAY
OBJECTIVES
TRANSPORT
HANDLE
7.2 B-62V
CAMERA

Page 9
SD CARD SLOT
SNAP BUTTON
ON/OFF BUTTON
POWER SUPPLY
CONNECTOR
MENU CONTROL
BUTTONS

Page 10
FFig. 1ig. 1
FFig. 2ig. 2
①
FFig. 4ig. 4
②
FFig. 3ig. 3
8. Assembling
8.1 Microscope assembling
The microscope comes already assembled from the factory. No
assembling procedure is requested.
• It is necessary to use 3x AAA rechargeable NiMh 1.2V.
1. Open the battery compartment placed in the lower part of the
frame. (Fig. 1)
2. Insert batteries, respecting polarity.
3. Close the battery compartment.
4. Plug the jack of the power supply into the socket ①in the
back side of the microscope. (Fig. 2)
8.2 Assembling the digital head
1. Using a at screwdriver (not provided) loosen the xing
screws on the two sides of the microscope ②. (Fig. 3)
2. Insert the adapter ③ into the empty hole of the microscope
and screw the fixing screws ②. (Fig. 4)
FFig. 4ig. 4
③
FFig. 4ig. 4
②