oventrop Aktor M ST User manual

Valves, controls + systems
Operating instructions
EN Electromotive actuator
“Aktor M ST/2P/3P L”, 24 V

Electromotive actuator 24 V Contents
3
115801283-V01.01.2020
1. General information ................................................................................................................4
1.1 Validity of the operating instructions .........................................................................................4
1.2 Type plate ..................................................................................................................................4
1.3 Extent of supply ........................................................................................................................4
1.4 Contact......................................................................................................................................4
1.5 EU Declaration of conformity ....................................................................................................4
1.6 Used symbols............................................................................................................................4
2. Safety-related information......................................................................................................4
2.1 Correct use................................................................................................................................4
2.2 Warnings ...................................................................................................................................4
2.3 Safety notes ..............................................................................................................................5
2.3.1 Dangerincaseofinadequatepersonnelqualication............................................................................. 5
2.3.2 Risk of burns due to hot components and surfaces................................................................................ 5
2.3.3 Availability of the operating instructions ..................................................................................................5
3. Technical description ..............................................................................................................6
3.1 Construction..............................................................................................................................6
3.2 Functional description...............................................................................................................6
3.3 Technical data ...........................................................................................................................6
4. Transport and storage.............................................................................................................7
5. Installation................................................................................................................................7
5.1 Initial installation........................................................................................................................7
5.2 Commissioning..........................................................................................................................7
5.3 CongurationoftheDIPswitches.............................................................................................7
5.4 Connectionofthepowersupply ...............................................................................................8
5.4.1 Steady control..........................................................................................................................................8
5.4.2 3 point control ..........................................................................................................................................8
5.4.3 Control .....................................................................................................................................................9
6. Operation .................................................................................................................................9
6.1 Control.......................................................................................................................................9
6.2 Status LED ................................................................................................................................9
6.3 Manual setting...........................................................................................................................9
7. Maintenance ............................................................................................................................9
8. Removal..................................................................................................................................10
9. Reinstallation .........................................................................................................................10
10. Disposal..................................................................................................................................10
Contents
Page

General information Electromotive actuator 24 V
4115801283-V01.01.2020
1. General information
Theoriginaloperatinginstructionsweredraftedin
German.
Theoperatinginstructionsinotherlanguageswere
translated from German.
1.1 Validity of the operating
instructions
These operating instructions are valid for the elec-
tromotiveactuator“AktorMST/2P/3PL”24V,for
“CoconQTR/QFC”DN40/50.
1.2 Type plate
The type plate is located on the bottom of the prod-
uct.
1.3 Extent of supply
• “AktorMST/2P/3PL”24V
• Operating instructions
1.4 Contact
Address
OVENTROPGmbH&Co.KG
Paul-Oventrop-Straße1
59939 Olsberg
GERMANY
Technical service
Phone:[phone]
1.5 EU Declaration of conformity
OventropGmbH&Co.KGherebydeclaresthatthis
product complieswiththebasicrequirementsand
other relevant provisions of the EC Directives con-
cerned.
The declaration of conformity can be obtained from
the manufacturer.
1.6 Used symbols
Important information and further explanations
fAction required
• Enumeration
1.
2.
Fixed order. Steps 1 to X.
ZResult of action
2. Safety-related information
2.1 Correct use
Safety in operation is only guaranteed if the product
is used correctly.
Theactuatormaybeusedinindoorheating,ventila-
tion and air conditioning systems.
Anyotheruseoftheproductwillbeconsidered
incorrect use.
Claims of any kind against the manufacturer and/
orhisauthorisedrepresentatives,duetodamages
caused by incorrect use cannot be accepted.
The observance of the operating instructions is part
of the compliance terms.
2.2 Warnings
Eachwarningcontainsthefollowingelements:
Warning symbol
SIGNAL WORD
Type and source of danger
Possibleconsequencesifthedangeroccurs
orthewarningisignored.
fPossibilitiesofavoidingthedanger.
Signalwordsdenetheseriousnessofthedanger
whicharisesfromasituation.
DANGER
Indicatesanimminentdangerwithhighrisk.
Thesituationwillleadtodeathorserious
injury if not avoided.
WARNING
Indicatesapossibledangerwithmoderate
risk. The situation may lead to death or seri-
ous injury if not avoided.
CAUTION
Indicatesapossibledangerwithlowrisk.It
may lead to minor and reversible injury if the
situation is not avoided.
NOTICE
Indicatesasituationwhichmayleadtodam-
age to property if not avoided.

Electromotive actuator 24 V Safety-related information
5
115801283-V01.01.2020
2.3 Safety notes
Wehavedevelopedthisproductinaccordancewith
current safety requirements.
Pleaseobservethefollowingnotesconcerningsafe
use.
2.3.1 Danger in case of inadequate personnel
qualication
Anyworkonthisproductmustonlybecarriedoutby
qualiedtradespeople.
As a result of their professional training and experi-
enceaswellastheirknowledgeoftherelevantlegal
regulations,qualiedtradespeopleareabletocarry
outanyworkonthedescribedproductprofessional-
ly.
User
Theuserhastobeinformedbythequaliedtrades-
people as to the operation.
2.3.2 Risk of burns due to hot components and
surfaces
fAllowtheproducttocooldownbeforeworkingonit.
fWear suitable protective clothing to avoid unprotect-
edcontactwithhotsystemcomponentsandttings.
2.3.3 Availability of the operating instructions
Anypersonworkingontheproducthastoreadand
apply these operating instructions and all other valid
documents.
The operating instructions have to be kept at the
installation location.
fHandtheseoperatinginstructionsandallothervalid
documents over to the user.

Technical description Electromotive actuator 24 V
6115801283-V01.01.2020
3. Technical description
3.1 Construction
M 30x1.5
95
62
71
96
A
68.5
Illust. 1: Side view
56
1
2
Illust. 2: Front view
(1) Pushbuttonforreleasingthelatchedvalve
stem
(2) Dust cover
3.2 Functional description
The actuator opens or closes the valve depending on
the applied control voltage.
3.3 Technical data
Operating voltage 24VAC±10%,50/60Hz
24 V DC ±10 %
Power consump-
tion
Dimensioning:
- 8.5 VA (24 V AC)
- 4.1 W (24 V DC)
Nominal:
- 4.0 VA (24 V AC)
- 1.9 W (24 V DC)
Start up load Max. 10 A for short periods
Control - Steady control 0(2)..10 V
DC;<0.5mA,invertible
- 3 point (open/stop/closed)
- 2 point (open/closed)
Connection Fixed pre-assembled cable
1,5m;5x0,5mm2
Motor deactiva-
tion
Drivestem:
extending=electronically,
retracting = electronically
Display LED display for operating volt-
age and status
Travel noise <28 dB (A)
Piston stroke max. 10 mm
Floating time 22 s/mm
Operating power 500N
Position indicator Stroke scale
Position feedback 0..10 V DC; 5 mA for 0..100%
travel;
invertible
Manual setting Onlywhentheoperatingcur-
rentisswitchedoff!
Adjustment stem for Allen key
underthecover,spannersize
4 mm
Valve anti-block-
ing function
Optional activation
Characteristic line
compensation
Optional activation
Permissible uid
temperature in the
valve
0 -120 °C
Ambient temper-
ature
0 - 50 °C
Relative
air humidity
Inoperation:0-85%,not
condensing

Electromotive actuator 24 V Transport and storage
7
115801283-V01.01.2020
Protection class IP54
Protective system IIIaccordingtoEN60730
Installation posi-
tion
360°
Weight 320 g
4. Transport and storage
Temperature
range
-0 °C - 50 °C
Relative
air humidity
0-85%,notcondensing
Particles Store dry and free from dust
Mechanical inu-
ences
Protectedfrommechanical
agitation
Weather inuenc-
es
Do not store outdoors
Protectfromdirectsunlight
Chemical inu-
ences
Donotstoretogetherwith
aggressiveuids
5. Installation
5.1 Initial installation
Make sure that there is enough space for the
installation of the actuator.
CAUTION
Risk of burns due to hot components
Anunprotectedcontactwithhotcomponents
may lead to burns.
fWear safety gloves.
3
6
0
°
Illust. 3: Installation position
1. Fit the adapter set to your valve according to the
enclosed installation instructions.
2. Fit the actuator to the connection thread of the
adapter.
3. Handtightenthecollarnut.
Avoid cross threading.
NOTICE
Damage to the actuator when tightening
the collar nut with excessive torque
The actuator can be damaged and its
be function impaired if the collar nut is
over-tightened.
fHandtightenthecollarnut.
5.2 Commissioning
5.3 Conguration of the DIP switches
fRemove the casing cover.
fConguretheDIPswitches.
3
2
5
1
4
6
Illust. 4: DIP switches
ON OFF
(1) Valve anti-blocking
functionON
Valve anti-blocking
function
OFF
Ifinstallationconditionsallow,thevalvean-
ti-blocking function can be activated during
commissioning.
Thevalveanti-blockingfunctionwillprevent
sticking of the stem if the valve is not activated
overalongerperiod,e.g.duringthesummer
break of heating systems.
Ifthevalveanti-blockingfunctionisactivated,
thestemwillbemovedforafewseconds,ifno
strokeliftiscarriedoutwithin10days.
It is not possible to use the
valve anti-blocking function
during3pointcontrol!

Installation Electromotive actuator 24 V
8115801283-V01.01.2020
(2) 2....10 V DC 0.....10 V DC
Control range of the steady control signal.
(3) Settingofthetraveldirectionwithacontrolvolt-
age of 10 V DC
Travel direction and
position feedback
100...0 %
Travel direction and po-
sition feedback 0....100
%
(4) Equal percentage
characteristic line
Linear characteristic
line
(5) Free
(6)
Whenswitchingswitch6,thestoreddatafor
valveadaptationwillbedeletedandanewini-
tialisationrunwillbetriggered.
Duringoperation,aninitialisationrunwillbe
triggeredautomaticallyevery7days,ifnoupper
orlowerstrokepositionisapproachedduring
this period.
TheLEDwillashgreenduringinitialisation.
5.4 Connection of the power supply
NOTICE
Damage to the actuator due to operation
in unmounted state
The actuator can be damaged and its func-
tionbeimpairedwhenoperatingtheactuator
electricallywithoutvalve.
fThe actuator must only be connected to
thepowersupplyafterinstallation.
NOTICE
Damage to the control technology due to a
high peak load when switching the actua-
tor on
fUseswitchingcomponentswhichare
designed for a short-term peak load of up
to 12 A.
fCompletelydisconnectthepowersupply.
fCarry out the desired assignment (see Illust. 5 to
Illust. 7).
fConnectthepowersupply.
ZAfterhavingconnectedthepowersupplyforthe
rsttime,theactuatorwillcarryoutaninitialisation
run.
Theproductwillbereadyforoperationafterinitiali-
sation.
ZProtectthestrokepositionindicatorbyturningthe
dust cover (position (2) in Illust. 2) around by 180°.
5.4.1 Steady control
1 2 3 4 5
24 V AC/DC
0 V AC/DC
Y = 0/2..10 V DC
0 V DC
U = 0..10 V DC
BN GY YE GNBU
Illust. 5: Pin assignment for steady control
(1) 0 V AC/DC blue (BU)
(2) 24 V AC/DC brown(BN)
(3) Y=0/2..10VDC grey(GY)
(4) Positionfeedback
0 V DC
yellow(YE)
(5) Positionfeedback
0..10 V DC
green(GN)
5.4.2 3 point control
2 3
24 V AC/DC
0 V AC/DC
1
BN GY BU
Illust. 6: Pin assignment for 3 point control
(1) 0 V AC/DC blue (BU)
(2) 0 V or 24 V AC/DC brown(BN)
(3) 0 V or 24V AC/DC grey(GY)
Thetraveldirectioncanbereversedbyswap-
ping the supply lines to terminal 2 and 3 at the
actuator.

Electromotive actuator 24 V Operation
9
115801283-V01.01.2020
5.4.3 Control
23
24 V AC/DC
0 V AC/DC
1
BN GY BU
Illust. 7: Pin assignment for 2 point control
(1) 0 V AC/DC blue (BU)
(2) 24 V AC/DC brown(BN)
(3) 0 V or 24V AC/DC grey(GY)
6. Operation
6.1 Control
The actuator is automatically controlled via the con-
trol technology.
6.2 Status LED
1
Illust. 8: Status LED
(1) Status LED
Status LED Meaning
Flashing green Initialisation run
Lit green Normaloperation
Lit red Valve blocking detected
Off Operating voltage interrupted
6.3 Manual setting
NOTICE
Damage to the actuator due to manual po-
sitioning of the stem beyond the dened
range
The actuator can be damaged and its func-
tion be impaired during manual setting.
fOnlymovetheadjustmentstemwithlittle
force.
fTurn the adjustment stem back by half a
turn as soon as you feel a resistance in
theupperorlowerstrokeposition.
NOTICE
Damage to the actuator due to manual
setting during electrical operation
The actuator can be damaged and its func-
tionbeimpairedwhenusingthemanual
setting during electrical operation of the
actuator.
fCompletely disconnect the actuator from
thepowersupplybeforeusingthemanual
setting.
1. Completelydisconnecttheactuatorfromthepower
supply.
2. Open the cover for manual setting (adjustment
stem) (see position 2 in Illust. 9).
3. Move the actuator into the desired stroke position
using a 4 mm Allen key.
The actuator has to be initiated after manual
setting.
Aninitialisationrunwillbetrigged:
- WhenswitchingDIPswitch6
(see Illust. 4).
- If a valve end position is approached dur-
ing operation.
- After 7 days at the latest.
7. Maintenance
The actuator is maintenance-free.

Removal Electromotive actuator 24 V
10 115801283-V01.01.2020
8. Removal
1
2
Illust. 9: Stroke position indicator and valve stem
cover
(1) Stroke position indicator of the actuator
(2) Cover for manual setting (adjustment stem)
CAUTION
Risk of burns due to hot components
Anunprotectedcontactwithhotcomponents
may lead to burns.
fAllowtheproducttocooldownbefore
workingonit.
NOTICE
It may not be possible to unscrew the col-
lar nut by hand
Insomecircumstances,theactuatorcloses
thevalvewiththemaximumactuatingpower
of500N.Inthiscase,thecollarnutcanno
longerbeunscrewedbyhand.
fDo not use pliers or similar to loosen the
collarnut!
fUse the manual setting option.
1. Make sure that no differential pressure is applied to
the valve body.
2. Completelydisconnecttheactuatorfromthepower
supply.
3. Check the stroke position of the actuator.
4. If the actuator is not in the upper to medium stroke
position,movetheactuatorintothemediumstroke
positionwiththehelpofthemanualsetting(see
section 6.3).
5. Loosen the collar nut.
6. Pressthepushbuttontoreleasethelatchedvalve
stem until stop and keep it pressed.
7. Remove the actuator from the valve.
Also remove the adapter set if you do not re-
quire it any longer for this valve.
9. Reinstallation
Theactuatormustnotbeinthelowerstroke
position for correct installation.
1. Beforereinstallation,movetheactuatortoanupper
tomediumstrokepositionwiththehelpofacontrol
signal or the manual setting (see section 6.3).
2. Install the actuator as described in section 5.
3. Puttheactuatorintooperationasdescribedin
section 5.2 .
4. TriggeraninitialisationrunbyswitchingDIPswitch
6 (see Illust. 4).
ZThe actuator is ready for operation.
10. Disposal
Guideline 2012/19/EU WEEE:
Waste electrical and electronic equipment
(WEEE)mustnotbedisposedofwithdo-
mesticwaste,butmustbedroppedoffata
collection point for the recycling of electri-
cal and electronic appliances.
NOTICE
Risk of environmental pollution
Incorrectdisposal(forinstancewiththe
domesticwaste)mayleadtoenvironmental
damage.
fPackagingmaterialistobedisposedofin
an environmentally friendly manner.
fComponents are to be disposed of pro-
fessionally.
Ifnoreturnordisposalagreementhasbeenmade,
the product has to be disposed of.
fIfpossible,thecomponentsaretoberecycled.
fComponents,whichcannotberecycled,aretobe
disposed of according to the local regulations. Dis-
posalwiththedomesticwasteisinadmissible.

OVENTROP
GmbH & Co. KG
Paul-Oventrop-Straße 1
59939 Olsberg
GERMANY
www.oventrop.com 115801384 V01.01.2020