ParaBody 886101 User manual

886101 ARM CURL ATTACHMENT
Revision:01/25/001
ASSEMBLY INSTRUCTIONS
Part#6797101

IMPORTANT NOTES
Please note:
Tools Required for Assembly
* Thank you for purchasing the Parabody 886101 ARM CURL ATTACHMENT. Please read
these instructions thoroughly and keep them for future reference. This product must be
assembled on a flat, level surface to assure its proper function.
* Ratchet with 9/16” socket or wrench
2
NOTE: BOLT LENGTH IS MEASURED FROM THE UNDERSIDE OF THE HEAD OF THE BOLT.
BOLT LENGTH RULER:
* We recommend cleaning your product (pads and frame) on a regular basis, using warm soapy
water. Touch-up paint can be purchased from your Parabody customer service representative
at [phone].
Bolt Length Ruler
0123456
1/2 1/2 1/2 1/2 1/2 1/2
WELCOMETOTHEWORLDOF Serious steel!
There is a risk assumed by individuals who use this type of equipment. To minimize risk, please
follow these rules:
2. Do not allow minors or children to play on or around this equipment.
1. Inspect equipment daily. Tighten all loose connections and replace worn parts immediately.
Failure to do so may result in serious injury.
3. Exercise with care to avoid injury.
4. If unsure of proper use of equipment, call your local Parabody distributor or call the
Parabody customer service department at [phone].
BOLT LENGTH

PARTS LIST
STEP 1:
FIGURE 1
3
• SECURELYassembletheARMPAD(2)totheARMCURLFRAME (1) usingtwo3/8”X1-1/4” BOLTS (3),two
3/8” LOCK WASHERS (5), and two 3/8” LOCK NUTS (4) as shown in FIGURE 1.
1
2
DESCRIPTION
ARMCURLFRAME
ARM PAD
3/8X 1-1/4”BOLT
3/8”WASHER
3/8”LOCKWASHER
PART #
6418502
6533801
3102901
3102501
3102601
KEY
1
2
3
4
5
QTY
1
1
2
2
2
BENCHFRAME
3/8 X 1-3/4” 3
4
5
• InserttheARM CURLATTACHMENTintotheUPRIGHTTUBE of theBENCHFRAMEas shown inFIGURE1,
andtighteninplaceusingtheTHUMBSCREW.
ThankyouforpurchasingthePARABODY886101ARM CURLATTACHMENT. Ifunsureofproperuseof
equipment,callyourlocalPARABODYdistributororcallthe PARABODYcustomerservicedepartmentat
[phone].