ParaBody 874 User manual

1
874 MULTI-ANGLE BENCH SYSTEM
CLASSH
PART#7710601
REV. B Revision:03/15/04
USER’S GUIDE
WARNING:
Read and follow all directions
for each step to insure proper
assembly of this product.
Version: 874109

THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF
EQUIPMENT. TO MINIMIZE RISK FOLLOW THESE RULES!
1. Before using, read all the warnings and instructions
on the use of this machine. Use only for intended
exercise. DO NOT modify the machine.
2. Obtain a medical exam before beginning any
exercise program.
3. Keep body and clothing free of all moving objects.
4. Inspect the machine before use. DO NOT use it if it
appears damaged. DO NOT attempt to fix a broken or
j
ammed machine. Notify your authorized ParaBody
dealer before use and have repairs made by an
authorized service technician.
5. Be certain that weight pin is completely inserted.
Use only the pin provided by the manufacturer. If
unsure, call your authorized ParaBody dealer.
6. Never pin the weights or prop plate into an elevated
position. DO NOT use the machine if found in this
condition. DO NOT attempt to fix. Notify your
authorized ParaBody dealer.
7. Inspect cables and their connections before using
machine. Pay particular attention to the cable ends.
DO NOT attempt to fix. Notify your authorized
ParaBody dealer before use and have repairs made by
an authorized service technician.
8. Make sure all spring loaded pull pins are fully
engaged in the adjustment position and fully tighten
thumbscrew before use.
9. Children must not be allowed near this machine.
Supervise teenagers.
.
IMPORTANT SAFETY INFORMATION
TABLE OF CONTENTS
Safety Statement.............2
General Notes..................3
Tools Required................3
Gym Layout.....................4
NOTE: In a continual effort to improve our products, specifications are subject to change
2004 Life Fitness, a division of Brunswick Corporation. All rights reserved.
ParaBody is a trademark of Brunswick Corporation
www.parabody.com
2
Parts list..........................5
Assembly Instructions.....5-9
General Maintenance.......10
Warranty Statement..........11
Product Services..............12
Insert-Registration Card
©

IMPORTANT NOTES
Please note:
Tools Required forAssembly
* Thank you for purchasing the ParaBody 874 Multi-Angle Bench System. Please read these
instructions thoroughly and keep them for future reference. This product must be assembled
on a flat, level surface to assure its proper function.
3
NOTE:BOLTLENGTH IS MEASURED FROMTHEUNDERSIDE OFTHE HEAD OFTHEBOLT.
BOLT LENGTH RULER:
* This product must be assembled on a flat, level surface to assure its proper function. DO NOT
securely tighten any frame connections until the entire frame has been assembled, unless
otherwise stated.
Bolt Length Ruler
0123456
1/2 1/2 1/2 1/2 1/2 1/2
BOLT LENGTH
* 3/4” wrench
* 9/16” wrench
* Ratchet with 3/4” and 9/16” sockets
* Adjustable wrench
* Tape measure

1 Square = 1’ X 1’
4
1’ 2’ 3’ 4’ 5’
1’
7’
6’
5’
4’
3’
2’

5
PARTS LIST
PART #
6650609
6650109
6649309
6624210
6624310
6259109
7710409
6654521
6654421
6406401
6412001
6236701
6692601
6405201
7234801
6145801
KEY
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
QTY
1
1
1
1
1
1
1
1
1
2
1
1
1
1
4
1
PART #
3235204
3235212
3114403
3114702
3235315
3235322
3235432
3235501
3221705
6417801
6650201
6416601
7339801
7656301
3235207
DESCRIPTION
3/8X 1”BOLT
3/8X 3”BOLT
3/8”WASHER
3/8”LOCKNUT
1/2X3-3/4”BOLT
1/2X5-1/2”BOLT
1/2X 8”BOLT
1/2”LOWHEIGHTLOCKNUT
1/2” E-RING
1/2 X 1” SPRING
1/2” FLANGE SPACER
1-1/2 X 3/4” GLIDE (8 PER)
1/2”DIAU-PIN
WHEEL
3/8X1-3/4”BOLT
QTY
6
4
14
6
1
1
1
3
1
1
2
1
1
2
2
DESCRIPTION
BENCHFRAME
ADJUSTABLESLIDE
ADJUSTABLESLEEVE
LEFTBACKPADANGLE
RIGHTBACKPADANGLE
FRONTBASE
REARBASE
SEATPAD
BACKPAD
HINGETAB
SPRINGPINASSEMBLY
1-3/4”SQ.END CAP
3X 2”END CAP
2”SQ.ENDCAP
2”SQ.COVERCAP
THUMBSCREW
KEY
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
FIGURE 1
STEP 1:
• Assemble the 1/2” DIA. U-PIN (29) to the BENCH FRAME (1) using one 1/2 X 1” SPRING (26), and one 1/2” E-RING (25) as
shown in FIGURE 1.
1
16
29
25
26
• Thread one THUMBSCREW (16) into the BENCH FRAME (1) as shown in FIGURE 1. The THUMBSCREW (16) will be used to
tighten down attachments.

6
FIGURE 2
STEP2:
0123456
1/2 1/2 1/2 1/2 1/2 1/2
• SECURELYassemble the FRONTBASE (6) to theBENCHFRAME (1) using two 3/8 X3”BOLTS(18), four 3/8”WASHERS (19),
andtwo 3/8”LOCK NUTS(20).See FIGURE2.
• Slidefour 2” SQ. COVER CAPS (15) over the endsof the FRONT & REAR BASE (6 & 7) as shown in FIGURE 2.
1
6
20
19
19
15
7
19
20
15
19
18 3/8 X 3”
18 3/8 X 3”
• SECURELYassemblethe REAR BASE (7) to the BENCH FRAME(1)using two 3/8 X 3” BOLTS(18), four 3/8”WASHERS(19), and
two3/8”LOCK NUTS(20). SeeFIGURE 2.
• SECURELYassemble twoWHEELS (30) to the REAR BASE (7) using two 3/8 X 1-3/4” BOLTS(31) and two 3/8” LOCK NUTS (20) as
shownin FIGURE 2.
31 3/8X 1-3/4”
30
20

7
STEP 3:
FIGURE 3
• Insert one 1-3/4” END CAP(12) into the end of theADJUSTABLE SLIDE (2) as shown in FIGURE 3.
• Attach eight 3/4 X 1-1/2” GLIDES (28) to the inside of the ADJUSTABLE SLEEVE (3) as shown in FIGURE 3 using the
following steps:
• Thoroughly clean all surfaces where the 3/4 X 1-1/2” GLIDES (28) are to be attached.
• Remove the 3/4 X 1-1/2” GLIDES (28) from the paper backing and firmly apply them to all shown surfaces.
• SECURELYassemble one SPRING PINASSEMBLY(11)tothe spring pin barrelon theADJUSTABLESLEEVE (3). SeeFIGURE3.
• Pullback on theSPRINGPIN (11)and CAREFULLYinsert theADJUSTABLESLIDE(2) into theADJUSTABLESLEEVE (3) asshown
inFIGURE3.
• AssembletheADUSTABLESLEEVE (3)totheBENCHFRAME(1)using one1/2 X3-3/4” BOLT(21),two 1/2”FLANGE SPACERS (27),
andone 1/2” LOW HEIGHTLOCK NUT (24) asshownin FIGURE 3.
1/2X 3-3/4” 21
24 1/2”LOWHEIGHT
27
27
11
2
28
12
1
3

8
STEP 4:
FIGURE 4
0123456
1/2 1/2 1/2 1/2 1/2 1/2
• Assemble the LEFTand RIGHTBACKPADANGLE(4 & 5) and two HINGE TABS (10) to the BENCH FRAME (1) using one 1/2 X 8”
BOLT(23) andone 1/2” LOWHEIGHTLOCKNUT(24)as shown inFIGURE4.
10
1
2
5
4
1/2 X 8” 23
24 1/2”LOWHEIGHT
24 1/2”LOWHEIGHT
22 1/2X 5-1/2”
• Assemble the LEFTand RIGHTBACK PADANGLE(4 & 5) to theADJUSTABLESLIDE (2) using one 1/2 X 5-1/2” BOLT(22)and
one1/2” LOWHEIGHTLOCK NUT (24)as shown inFIGURE 4.

9
STEP5:
FIGURE 5
• SECURELYassemble the SEATPAD (8)tothe HINGETABS(10) using two3/8 X 1”BOLTS(17)and two 3/8”WASHERS(19)as shown
inFIGURE5.
3/8 X 1” 17
19
10
13
14
9
8
4
5
• SECURELYassemblethe BACK PAD(9)to the LEFTBACK PADANGLE(4) and theRIGHTBACKPADANGLE(5) using four 3/8
X1” BOLTS (17) andfour3/8”WASHERS (19) asshowninFIGURE 5.
ThankyouforpurchasingtheParabody874101MULTI-ANGLE BENCH. If unsureof properuse of equip-
ment,callyourlocalParabodydistributororcalltheParabodycustomerservicedepartmentat [phone].
• Slideone 2” SQ. ENDCAP (14) into the topof the BENCH FRAME (1)as shown in FIGURE 5.
• Slideone 3 X 2” END CAP (13) into the frontof the BENCH FRAME (1)as shown in FIGURE 5.

MAINTENANCE
MODEL #________________________
SERIAL #_________________________
DATE OF PURCHASE: _____________
DEALERS NAME: _________________
DEALERS PHONE #_______________
10
* We recommend cleaning your product (pads and frame) on a regular basis, using warm soapy
water. Touch-up paint can be purchased from your ParaBody customer service representative
at [phone].
* Inspect equipment daily. Tighten all loose connections are replace worn parts immediately.
Failure to do so may result in serious injury
Thank you forpurchasing the ParaBody 874 Multi-Angle Bencb System.
Please note:
* PLEASE RECORD THE INFORMATION REQUESTED BELOW. IN THE EVENT
YOU MAY NEED SERVICE YOU WILLBEASKED FOR THIS INFORMATION.
REMEMBER TO FILL OUTYOUR WARRANTY REGISTRATION CARD AND
MAIL BACK.
SERIALNUMBER
LOCATION

11
NOTES:
LIMITED WARRANTY
ParaBodyextends the following LIMITED WARRANTYto the original owner of the ParaBody products. The Warranty terms apply to IN HOME USE ONLY.
1. LIMITEDWARRANTYON FRAMEAND WELDS. Ifthe frame of the ParaBodyproduct ora weld should crack or break, itwill berepaired
or replaced by ParaBody. Terms: Lifetime – for so long as the Customer owns the ParaBody product.
2. LIMITED WARRANTYONPARTS. Ifthe following partsare defective inmaterial orworkmanship, ParaBody willsupply replacement parts:
all bolts, nuts, washers, bearings, bushings, pulleys, thumbscrews, collars, cable retaining clips, adjustable pre-stretch slides, roller pad
shafts, allen head bolts, weight selector pin, weight stack shaft, set screws, protector caps, adjustment chain, cotter pin, plunger, spring
and knob. Terms: Lifetime – for so long as the Customer owns the ParaBody product.
3. LIMITED WARRANTY ON CABLES AND UPHOLSTERY. If the coated cables or upholstery are defective in material or workmanship,
ParaBody will repair or replace them, at its option. Terms: Three (3) years.
4. CONDITIONSAND EXCEPTIONS. Any product misuse, abuse or alteration, any attempt to repair by a person other than an authorized
ParaBody Service Center, any improper assembly, accident, or any other condition resulting from occurrences beyond the control of
ParaBody will void this Limited Warranty.
5. REPLACEMENTAND REPAIR EXPENSES. ParaBody will provide only replacement parts or repair under this warranty. The Owner is
responsiblefor all othercosts. Such costs may include, butare not limitedto: a. laborcharges for service,removal, repairor reinstallation
oftheParaBody product oranycomponent part; b.shipping, delivery,handlingandadministrative charges forreturningparts to ParaBody;
and c. all necessary or incidental costs related to installation of the replacement parts.
6. SHIPPING. If shipping bythe Owners isdeemed necessary (insole discretion ofParaBody), partsshould be shippedin their original carton
orequivalent packaging, fully insured withshipping charges prepaid. ParaBody will notassume any responsibility for anyloss ordamage
incurredin shipping.
7. CLAIMPROCEDURES. If serviceon your ParaBody product is required during the warranty period, pleasecontact ourCustomer Service
Departmentat1-800-328-9714forinstructionsregardingreturningorreplacing parts. Please have available the followinginformation: (i)the
dealer’s name; (ii) the date of purchase; (iii) the serial # (s) of your product (the serial number location is called out on the final assembly
drawingincluded withyour assemblyinstruction); (iv)a description of the nature of the problem.
8. OWNER’S RIGHT. ThisLimitedWarrantygives youspecificlegal rights. You mayalso have other rights,whichvary depending onlocal law.
9. LIMITATION OF IMPLIED WARRANTIES. All implied warranties, except to the extent prohibited by applicable law, shall have no greater
duration than the warranty period set forth above. There are no warranties which extend beyond the description inthis Limited Warranty.
Because local laws do not allow limitations on how long an implied warranty lasts, the above limitations may not apply to you.
10. DISCLAIMER. No otherexpress warrantyhas beenmade orwill bemade onbehalf of ParaBody with respect to any ParaBody product or
the operation, repair or replacement of any ParaBody product. ParaBody shall not be responsible for injury, loss of use of the ParaBody
product,inconvenience, loss or damage to personal property, whether direct orindirect, andincidental orconsequential damages,so the
above limitation or exclusion may not apply to you.

INTERNATIONALOFFICES
LifeFitnessAtlanticBV
AtlanticHeadquarters
Bijdorpplein 25-31
2992LBBarendrecht
The Netherlands
Phone: [phone]
Fax: [phone]
Life Fitness Japan
8/F, Nippon Brunswick Building
5-27-7Sendagaya
Shibuya-Ku, Tokyo 151-0051
Japan
Phone: [phone]
Fax:[phone]
Life Fitness (UK) Ltd.
QueenAdelaide
Ely, CambsCB7 4UB
United Kingdom
Phone CSS: [phone]
Fax CSS: [phone]
Life Fitness Benelux N.V.
Bijdorpplein 25-31
2992LBBarendrecht
The Netherlands
Phone: [phone]
Fax: [phone]
LIFEFITNESS
5100 North River Road. Schiller Park, IL 60176 U.S.A.
Tel: [phone] Fax: [phone]
800.328.9714 (Toll-free within the U.S. and Canada)
www.parabody.com
12
LifeFitnessEUROPE GmbH
Siemensstrasse 3
85716Unterschleissheim
Germany
Phone: [phone]
Fax: [phone]
Life Fitness Italia S.R.L.
Via Elvas 92
39042Bressanone
Italy
Phone: [phone]
Fax: [phone]
Life FitnessAsia Pacific Limited
Room 2610, Miramar Tower
132 Nathan Road, Tsimshatsui
Kowloon, Hong Kong
Phone: [phone]
Fax: [phone]
Life Fitness Do Brazil
Al. Rio Negro, 433-Predio 2-Sala 2
3ºandar (Confab)
Aplhaville-Barueri-Sao Paulo
CEP: 06454-904
Brazil
Phone:[phone]
Fax:[phone]