PAX TECHNOLOGY INC. PAX TECHNOLOGY INC.
Contents Checklist
Please check the components after unpacking. If any components are
missing, please contact the dealer.
USB Cable
D190 Mobile payment terminal
Battery
Quick Setup Guide
AC Power Adapter
Product Description
Power
Power on: Plug in power adapter or insert the battery, Press
button for 3 seconds until the PAX LOGO displays on LCD.
Red indicator: Device is charging
Green indicator: Charging is complete
Red and green indicators flashing alternately: Charging problem
Power off: Press button for 3 seconds until the “Power off ”
displays on the LCD screen, then press “ENTER”. The POS terminal
is being turned off.
Card Readers
Magnetic stripe card: Place the magnetic stripe face up. Keep the
magnetic stripe card perpendicular to the main display. Swipe card
through the magnetic card slot at a constant speed.
IC card: Place the IC chip face up. Insert the IC card into the card
slot and push it to the end.
Contactless card: Put the contactless card on the center of the
payment module screen.
SAM/SIM Card
5
The default hardware configuration only supports SIM1 slot. To insert
SAM/SIM card, remove the battery cover, remove the battery, insert the
SAM/SIM card to the corresponding card slot, replace the battery and
the battery cover.
Battery:
Align battery tip side to battery tip in terminal when inserting the battery.
Environment
6
Working Environment: Temperature: 0℃～50℃ (32℉～122℉)
Humidity: 10%～93% (non-condensing)
Storage Environment: Temperature: -20℃～70℃ (-4℉～158℉)
Humidity.:5%～95% (non-condense)
Device Location
7
Locate the device on a countertop, desktop, or tabletop. Keep the
device away from direct sunlight, excessive dust, moisture, and heat.
Avoid locating the device near electrical devices that might introduce
interference such as microwave ovens and blow dryers.
Cleaning the Device
8
WARNING:
Do not use industrial strength or abrasive cleaner as it may damage
or scratch the screen.
Do not immerse terminal in water or liquid.
Do not spray water or cleaner into card reader or ports.
To clean screen, apply distilled water or mild glass cleaner onto a soft,
lint-free cloth and gently wipe screen.
To clean device, apply distilled water or plastic-safe cleaner onto a soft,
lint-free cloth and wipe gently.
Power button
Indicator light
Display
Shortcut button
Pin pad Function keys
Enter key
Magstripe
card reader
Power port
Left Side View Front View Right Side View
Magstripe
card reader
Power button
Flash light
Camera
Chip card slot
Shortcut button
Power button
Shortcut button
Power port
Speaker
SIM2/SAM
SIM1(UP)
SIM1 card slot
SIM2/SAM card slot
