PAX S300 User manual

PAX S300 WITH CORNERSTORE GUIDE
Note: The PAX must first be set up on your network. An ethernet cable will be required to hardwire the
PAX to your network router. You will use the RED dongle on attached to the PAX device to connect the
ethernet cable.
Obtaining the IP Address for input into Cornerstore POS
1. Press the blue FUNC button and the 1 key at
the same time.

2. Enter the default password “916860” then
press the green key on the key pad. If the default
password does not work, you will need to contact
your payment processor for assistance.
3. Tap on the down arrow to access additional
selections.

4. Tap on Communication or press 2 on the
keypad.
5. Enter the default password “916860” then
press the green key on the key pad. If the default
password does not work, you will need to contact
your payment processor for assistance.

6. Tap on the down arrow to access additional
selections.
7. Tap on LAN Parameters or press 3 on the
keypad.

8. Tap on IP Address or press 2 on the keypad.
9. Make a note of the IP Address that is displayed
in the box. We will need to enter this information
into CRE later on. Tap twice on the blue arrow on
the screen or press the red button with the X
twice to go back to the previous menu.

10. Tap on LAN Type or press 1 on the keypad.
11. Tap on Static or press 2 on the keypad.

12. Tap on IP Address or press 2 on the keypad.
13. Confirm the IP Address displayed is the same
as what you noted in step 9. Alternatively, you
may assign a different IP address by tapping on
the blue arrow once or pressing the red key with
the X, then using the number pad to enter a new
IP address; hit the green key to save your
changes. You will need to enter the IP Address as
12 digits, e.g. if the IP Address you are entering is
172.25.1.30, this will have to be keyed in as
172.025.001.030. Take note of the new IP
address then press the green key with the arrow
to save your changes. Press the red button with
the X repeatedly until you are back at the
INSERT/SWIPE ANYTIME screen. Note: If you do
not know how to obtain an IP address, you may
need to contact your network administrator.

Input IP Address into Cornerstore POS
1. Open Cornerstore to the main point
of sale screen and navigate to the setup
menu.
2. Navigate to the administrative menu
and then proceed to payment
processing.
3. Use the drop down and select PAX
HEARTLAND. Then, enter the IP Address
found on the PAX from the previous
section. Enter “10009” for the port
number and click save and exit.
Ring up a test credit sale. You should
now see your sale rung up on the PAX.