PEERLESS PAP 35 Guide

ISSUED: 07-31-01 SHEET #: 055-9030-5 08-05-04
Visit the Peerless Web Site at www.peerlessindustries.com For customer service call 1-800-729-0307 or 708-865-8870.
1 of 2
IMPORTANT! Read entire instruction sheet
before you start installation and assembly.
Installation and Assembly - Universal Projector Mount Models: PAP 35, PAP 35-S,
PAP 35-W
Before you start check the parts list below to
make sure all of the parts shown are included.
Description Qty. PAP 35 PAP 35-S PAP 35-W
Atop plate 1 055-1144 055-4144 055-2144
Bhorizontal slide 2 054-1128 054-4128 054-2128
Cvertical slide 2 054-1129 054-4129 054-2129
DM6 x 1 x 12 mm security screw 8 520-1050 520-2050 520-2050
Efoam pad 3/8" x 12.75" x 1/8" 4 599-3802 570-0015 570-0015
Fallen wrench 4 mm security 1 560-9646 560-9646 560-9646
G1/4" flat washer 8 540-9440 540-9444 540-9444
H1/4" lock washer 8 540-9402 540-9447 540-9447
I#10-32 x .75" socket pin screw 2 510-2128 510-2128 510-2128
Parts List
Note: Actual parts may appear slightly different than illustrated.
A
C
B
E
F
Cutfoampad(E)toproperlengthtoline Universal
projector mount assembly parts (A, B, C) as
shown. Peel off sticky back paper from foam pad
andattach.
H
GD
I
PRSMOUNT
FASTENERS
Refer to PRS mount
instructions for adapter
plate attachment.
• Beforeinstallation,identify the location of all vents and
ports on the projector to ensure they will not be
obstructedby the universal mount. Blockedvents
may cause damage to the equipment.
CAUTION
• Installer must verify that the ceiling will safely support
fourtimesthe combined weight of all attached equip-
mentand hardware.
WARNING
B
C
EE
E
E
A
E
E

ISSUED: 07-31-01 SHEET #: 055-9030-5 08-05-04
Visit the Peerless Web Site at www.peerlessindustries.com For customer service call 1-800-729-0307 or 708-865-8870.
2 of 2
NOTE:*Notch indicates front.
Connectverticalslides (C) to horizontal slides (B).
Next attach horizontal slides to top plate (A)
wrappingprojector mount assembly around
projector.
A
B
B
C
C
Onceprojectorisencompassed with projector
mount assembly, secure with eight screws (D)
andwashers(G,H). Be sure projector is centered
inprojectormount.Tightenwithallenwrench(F).
*
DH
G
©2004PeerlessIndustries,Inc. Allrightsreserved.
PeerlessisaregisteredtrademarkofPeerlessIndustries,Inc.
Allotherbrandandproductnamesaretrademarksorregisteredtrademarksoftheirrespectiveowners.