Phoenix Contact FL SWITCH MM HS UM E User manual

AUTOMATION
User manual
Modular Managed (Compact) Switch System
FL SWITCH MM HS UM E for
FL SWITCH MM HS
FL SWITCH MCS ...
RSPSupply - 1-888-532-2706 - www.RSPSupply.com
http://www.RSPSupply.com/p-14178-Phoenix-Contact-2832357-FL-IF-2TX-VS-RJ-D-Media-Module-for-Modular-Switch.aspx

2012-01-23
AUTOMATION
6874_en_15 PHOENIX CONTACT
Description of the hardware and software functions of the
Modular Managed Switch System (MMS) with firmware Version 4.70a and the
Managed Compact Switch (MCS) with firmware Version 4.72
FL SWITCH MM HS UM E
15
—
The MMS and the MCS with firmware Version 4.70a (MMS)/4.72 (MCS) in the Factory Line product range.
The Modular Managed Switch System includes:
- The FL SWITCH MM HS and FL SWITCH MM HS/M head stations
- The FL MXT and FL MXT/M extension modules
- The various FL IF ... interface modules
The Managed Compact Switch includes:
- The FL SWITCH MCS 16TX and FL SWITCH MCS 14TX/2FX MCS switches
- The FL MEM PLUG/FL MEM PLUG/MRM configuration memories
User manual
Designation:
Revision:
Order No.:
This user manual is valid for (see ordering date in chapter 12):
RSPSupply - 1-888-532-2706 - www.RSPSupply.com
http://www.RSPSupply.com/p-14178-Phoenix-Contact-2832357-FL-IF-2TX-VS-RJ-D-Media-Module-for-Modular-Switch.aspx

PHOENIX CONTACT
Please observe the following notes
User group of this manual
The use of products described in this manual is oriented exclusively to:
– Qualified electricians or persons instructed by them, who are familiar with applicable
standards and other regulations regarding electrical engineering and, in particular, the
relevant safety concepts.
– Qualified application programmers and software engineers, who are familiar with the
safety concepts of automation technology and applicable standards.
Explanation of symbols used and signal words
How to contact us
Internet Up-to-date information on Phoenix Contact products and our Terms and Conditions can be
found on the Internet at:
www.phoenixcontact.com
Make sure you always use the latest documentation.
It can be downloaded at:
www.phoenixcontact.net/catalog
Subsidiaries If there are any problems that cannot be solved using the documentation, please contact
your Phoenix Contact subsidiary.
Subsidiary contact information is available at www.phoenixcontact.com.
Published by PHOENIX CONTACT GmbH & Co. KG
Flachsmarktstraße 8
32825 Blomberg, GERMANY
Should you have any suggestions or recommendations for improvement of the contents and
layout of our manuals, please send your comments to:
[e-mail]
This is the safety alert symbol. It is used to alert you to potential personal injury
hazards. Obey all safety measures that follow this symbol to avoid possible in-
jury or death.
There are three different categories of personal injury that are indicated with a
signal word.
DANGER This indicates a hazardous situation which, if not avoided, will re-
sult in death or serious injury.
WARNING This indicates a hazardous situation which, if not avoided, could
result in death or serious injury.
CAUTION This indicates a hazardous situation which, if not avoided, could
result in minor or moderate injury.
This symbol together with the signal word NOTE and the accompanying text
alert the reader to a situation which may cause damage or malfunction to the
device, hardware/software, or surrounding property.
This symbol and the accompanying text provide the reader with additional in-
formation or refer to detailed sources of information.
RSPSupply - 1-888-532-2706 - www.RSPSupply.com
http://www.RSPSupply.com/p-14178-Phoenix-Contact-2832357-FL-IF-2TX-VS-RJ-D-Media-Module-for-Modular-Switch.aspx

Please observe the following notes
PHOENIX CONTACT
General terms and conditions of use for technical documentation
Phoenix Contact reserves the right to alter, correct, and/or improve the technical documentation and the products de-
scribed in the technical documentation at its own discretion and without giving prior notice, insofar as this is reason-
able for the user. The same applies to any technical changes that serve the purpose of technical progress.
The receipt of technical documentation (in particular user documentation) does not constitute any further duty on the
part of Phoenix Contact to furnish information on modifications to products and/or technical documentation. You are
responsible to verify the suitability and intended use of the products in your specific application, in particular with re-
gard to observing the applicable standards and regulations. All information made available in the technical data is sup-
plied without any accompanying guarantee, whether expressly mentioned, implied or tacitly assumed.
In general, the provisions of the current standard Terms and Conditions of Phoenix Contact apply exclusively, in par-
ticular as concerns any warranty liability.
This manual, including all illustrations contained herein, is copyright protected. Any changes to the contents or the
publication of extracts of this document is prohibited.
Phoenix Contact reserves the right to register its own intellectual property rights for the product identifications of
Phoenix Contact products that are used here. Registration of such intellectual property rights by third parties is pro-
hibited.
Other product identifications may be afforded legal protection, even where they may not be indicated as such.
RSPSupply - 1-888-532-2706 - www.RSPSupply.com
http://www.RSPSupply.com/p-14178-Phoenix-Contact-2832357-FL-IF-2TX-VS-RJ-D-Media-Module-for-Modular-Switch.aspx

Table of contents
6874_en_16 PHOENIX CONTACT i
Table of contents
1 The Modular Managed Switch System (MMS) and the Managed Compact Switch (MCS) .....1-1
1.1 Properties (MMS) ...............................................................................................1-1
1.2 Future-proof networks for the highest possible requirements .............................1-1
1.2.1 System components (MMS) ...............................................................1-3
1.2.2 MMS firmware versions and their functions ........................................1-5
1.2.3 Firmware functions and the required hardware (MMS) .......................1-7
1.2.4 Device view (MMS) .............................................................................1-7
1.2.5 Dimensions of the Modular Managed Switch System
for normal operation ..........................................................................1-10
1.2.6 Dimensions of the Modular Managed Switch System
for GL-certified operation ..................................................................1-11
1.2.7 Assignment of ports to slots ..............................................................1-11
1.3 Status and diagnostic indicators.......................................................................1-12
1.3.1 LEDs on the switch and the MMS extension module ........................1-12
1.3.2 Meaning of the 7-segment display (MMS) ........................................1-14
1.4 Properties (MCS)..............................................................................................1-18
1.4.1 Firmware versions and their functions (MCS) ...................................1-18
1.4.2 Firmware functions and the required hardware (MCS) ......................1-21
1.4.3 Dimensions of the MCS ....................................................................1-21
1.4.4 Device view (MCS) ...........................................................................1-22
2 Mounting and installation ........................................................................................................2-1
2.1 Mounting and removing the MMS head station or MCS .....................................2-1
2.2 Mounting and removing extension modules (MMS) ...........................................2-3
2.3 Mounting and removing interface modules (MMS) .............................................2-5
2.4 Arrangement of the interface modules................................................................2-7
2.5 Mounting and removing the FL M LABEL labeling field (accessories) ................2-8
2.5.1 Mounting .............................................................................................2-8
2.5.2 Removal ..............................................................................................2-9
2.5.3 Dimensions of the labeling field ..........................................................2-9
2.6 FL MEM PLUG (accessories) .............................................................................2-9
2.7 Installing the MMS or MCS ...............................................................................2-10
2.7.1 Connecting the supply voltage to the MMS/MCS ..............................2-10
2.7.2 Connecting the supply voltage to the
FL SWITCH MM HS/M for GL-certified operation .............................2-11
2.7.3 Alarm contact ....................................................................................2-12
2.7.4 V.24 (RS-232) interface for external management ............................2-13
2.8 Grounding.........................................................................................................2-13
3 Startup and functions ..............................................................................................................3-1
3.1 Basic settings .....................................................................................................3-1
RSPSupply - 1-888-532-2706 - www.RSPSupply.com
http://www.RSPSupply.com/p-14178-Phoenix-Contact-2832357-FL-IF-2TX-VS-RJ-D-Media-Module-for-Modular-Switch.aspx

FL SWITCH MM HS / FL SWITCH MCS
ii PHOENIX CONTACT 6874_en_16
3.1.1 Default upon delivery/default settings .................................................3-1
3.2 Using Smart mode..............................................................................................3-2
3.2.1 Activating Smart mode ........................................................................3-2
3.2.2 Assigning IP parameters .....................................................................3-4
3.2.3 Flowchart after a restart ......................................................................3-8
3.3 Starting up interface modules with the MMS ....................................................3-10
3.3.1 FL IF 2TX VS-RJ ... ...........................................................................3-10
3.3.2 FL IF 2POF 10/100 ... ........................................................................3-12
3.3.3 FL IF 2HCS 100 ... ............................................................................3-15
3.3.4 FL IF 2FX SC .../FL IF 2FX SM SC ... ..............................................3-17
3.3.5 FL IF 2FX ST-D .................................................................................3-19
3.3.6 FL IF TX/POF 10/100 ... ....................................................................3-20
3.3.7 FL IF TX/HCS 100 ... .........................................................................3-21
3.3.8 FL IF MEM 2TX-D/FL IF MEM 2TX-D/MRM ......................................3-23
3.3.9 FL IF 2PSE-F ....................................................................................3-24
3.3.10 FL IF 2POF SCRJ-D ........................................................................3-28
3.4 Frame switching ...............................................................................................3-31
3.4.1 Store-and-forward .............................................................................3-31
3.4.2 Multi-address function .......................................................................3-31
3.4.3 Learning addresses ..........................................................................3-31
3.4.4 Prioritization ......................................................................................3-32
4 Configuration and diagnostics .................................................................................................4-1
4.1 Factory Manager ................................................................................................4-1
4.1.1 General function ..................................................................................4-1
4.1.2 Assigning IP parameters .....................................................................4-1
4.1.3 Configuration and diagnostics .............................................................4-3
4.2 Web-based management (WBM).....................................................................4-10
4.2.1 General function ................................................................................4-10
4.2.2 Requirements for the use of WBM ....................................................4-11
4.2.3 Functions/information in WBM ..........................................................4-12
4.3 Simple Network Management Protocol (SNMP)...............................................4-44
4.3.1 General function ................................................................................4-44
4.3.2 Diagram of SNMP management .......................................................4-47
4.3.3 RFC1213 MIB - MIB II .......................................................................4-49
4.3.4 RMON MIB (1.3.6.1.2.1.16) ..............................................................4-56
4.3.5 Bridge MIB (1.3.6.1.2.1.17) ...............................................................4-62
4.3.6 pBridgeMIB (1.3.6.1.2.1.17.6) ...........................................................4-64
4.3.7 qBridgeMIB (1.3.6.1.2.1.17.7) ...........................................................4-65
4.3.8 rstp MIB (1.3.6.1.2.1.17.11) ..............................................................4-68
4.3.9 IANAifType MIB (1.3.6.1.2.1.30) .......................................................4-69
4.3.10 IF MIB (1.3.6.1.2.1.31) ......................................................................4-69
4.3.11 pnoRedundancy MIB 1.3.6.1.4.1.24686 ...........................................4-72
4.3.12 Private MIBs ......................................................................................4-73
RSPSupply - 1-888-532-2706 - www.RSPSupply.com
http://www.RSPSupply.com/p-14178-Phoenix-Contact-2832357-FL-IF-2TX-VS-RJ-D-Media-Module-for-Modular-Switch.aspx

Table of contents
6874_en_16 PHOENIX CONTACT iii
4.4 Management via local V.24 (RS-232) communication interface .....................4-125
4.4.1 General function ..............................................................................4-125
4.4.2 User interface functions ..................................................................4-126
4.4.3 Starting with faulty software (firmware) ...........................................4-129
4.5 Management via Telnet ..................................................................................4-132
4.5.1 Configuring the Telnet terminal .......................................................4-132
4.5.2 Telnet interface functions ................................................................4-132
5 (Rapid) Spanning Tree ............................................................................................................5-1
5.1 General function .................................................................................................5-1
5.2 (R)STP startup....................................................................................................5-2
5.2.1 Enabling (R)STP on all switches involved ...........................................5-2
5.2.2 Connection failure - Example ............................................................5-11
5.2.3 Mixed operation of RSTP and STP ...................................................5-13
5.2.4 Topology detection of a Rapid Spanning Tree network (RSTP) ........5-13
5.2.5 Configuration notes for Rapid Spanning Tree ...................................5-16
6 Media Redundancy Protocol (MRP) .......................................................................................6-1
6.1 General function .................................................................................................6-1
6.2 MRP manager ....................................................................................................6-1
6.2.1 Network examples ..............................................................................6-2
6.3 Enabling web pages for using MRP in WBM ......................................................6-4
6.4 Configuration of MRP .........................................................................................6-4
6.4.1 MRP General ......................................................................................6-4
6.4.2 MRP Configuration ..............................................................................6-5
7 Multicast filtering ....................................................................................................................7-1
7.1 Basics.................................................................................................................7-1
7.2 Enabling the web pages for multicast filtering in WBM .......................................7-1
7.3 Static multicast groups .......................................................................................7-1
7.3.1 "Current Multicast Groups" web page .................................................7-2
7.3.2 Creating static multicast groups ..........................................................7-2
7.3.3 Procedure for creating a multicast group ............................................7-4
7.4 Dynamic multicast groups ..................................................................................7-7
7.4.1 Internet Group Management Protocol (IGMP) .....................................7-7
7.4.2 "General Multicast Configuration" web page .......................................7-8
7.5 Multicast source detection..................................................................................7-9
7.5.1 Properties of multicast source detection .............................................7-9
8 Virtual Local Area Network (VLAN) ........................................................................................8-1
8.1 Basics.................................................................................................................8-1
8.2 Enabling the VLAN web pages in web-based management ...............................8-1
RSPSupply - 1-888-532-2706 - www.RSPSupply.com
http://www.RSPSupply.com/p-14178-Phoenix-Contact-2832357-FL-IF-2TX-VS-RJ-D-Media-Module-for-Modular-Switch.aspx

FL SWITCH MM HS / FL SWITCH MCS
iv PHOENIX CONTACT 6874_en_16
8.2.1 Management VLAN ID ........................................................................8-2
8.2.2 Changing the management VLAN ID ..................................................8-2
8.3 General VLAN configuration...............................................................................8-3
8.4 Current VLANs ...................................................................................................8-4
8.4.1 Static VLANs .......................................................................................8-5
8.4.2 VLAN Port Configuration .....................................................................8-6
8.4.3 VLAN Port Configuration Table ...........................................................8-6
8.5 Creating static VLANs ........................................................................................8-7
8.5.1 Dynamic configuration ........................................................................8-9
8.6 VLAN and (R)STP ..............................................................................................8-9
9 Operating as a PROFINET device ..........................................................................................9-1
9.1 Preparing the switch for PROFINET mode .........................................................9-1
9.2 Switch as a PROFINET IO device ......................................................................9-2
9.2.1 Configuration in the engineering tool ...................................................9-2
9.2.2 Configuring the switch as a PROFINET IO device ..............................9-4
9.2.3 Configuration via the engineering tool .................................................9-5
9.2.4 PROFINET flashing function ...............................................................9-5
9.2.5 Device naming ....................................................................................9-5
9.2.6 Operating in the PROFINET environment ...........................................9-5
9.3 PROFINET alarms..............................................................................................9-6
9.3.1 Alarms in WBM ...................................................................................9-7
9.4 Process data communication .............................................................................9-7
9.4.1 Control word .......................................................................................9-8
9.5 PDEV - Function description...............................................................................9-9
9.5.1 PROFINET stack and PDEV function ..................................................9-9
9.6 Conformance according to PROFINET conformance class B ..........................9-10
10 LLDP (Link Layer Discovery Protocol) ..................................................................................10-1
10.1 Basics...............................................................................................................10-1
10.2 Representation of the topology in an engineering tool ......................................10-4
11 DHCP relay agent .................................................................................................................11-1
11.1 Activating the DHCP relay agent ......................................................................11-1
12 Technical data and ordering data ..........................................................................................12-1
12.1 Technical data ..................................................................................................12-1
12.1.1 Technical data (MMS) .......................................................................12-1
12.1.2 Technical data (MCS) .......................................................................12-5
12.1.3 Revision history of this manual ..........................................................12-7
12.2 Typical current consumption (MMS) - (Example)..............................................12-8
RSPSupply - 1-888-532-2706 - www.RSPSupply.com
http://www.RSPSupply.com/p-14178-Phoenix-Contact-2832357-FL-IF-2TX-VS-RJ-D-Media-Module-for-Modular-Switch.aspx

Table of contents
6874_en_16 PHOENIX CONTACT v
12.3 Ordering data ...................................................................................................12-9
12.3.1 Ordering data (MMS) ........................................................................12-9
12.3.2 Ordering data for GL-certified components
(GL Certificate No. 24 2750 4 HH) ....................................................12-9
12.3.3 Ordering data (MCS) ......................................................................12-10
12.3.4 Accessories (MMS/MCS) ...............................................................12-10
RSPSupply - 1-888-532-2706 - www.RSPSupply.com
http://www.RSPSupply.com/p-14178-Phoenix-Contact-2832357-FL-IF-2TX-VS-RJ-D-Media-Module-for-Modular-Switch.aspx

FL SWITCH MM HS / FL SWITCH MCS
vi PHOENIX CONTACT 6874_en_16
RSPSupply - 1-888-532-2706 - www.RSPSupply.com
http://www.RSPSupply.com/p-14178-Phoenix-Contact-2832357-FL-IF-2TX-VS-RJ-D-Media-Module-for-Modular-Switch.aspx

The Modular Managed Switch System (MMS) and the Managed Compact Switch (MCS)
6874_en_16 PHOENIX CONTACT 1-1
1 The Modular Managed Switch System (MMS) and the
Managed Compact Switch (MCS)
1.1 Properties (MMS)
The Modular Managed Switch (Modular Managed Switch System - MMS) is an Ethernet
switch, which is suitable for industrial use and consists of a head station, extension
modules, and interface modules. The head station and extension modules contain the
entire Ethernet switching technology. Interface modules provide the interface to the desired
physical transmission method. An extension module can be used to extend the head station
from eight ports to 16 ports, and the use of two extension modules gives a maximum of
24 ports. The desired transmission medium can be freely selected using the various
interface modules.
Figure 1-1 The Modular Managed Switch System
1.2 Future-proof networks for the highest possible
requirements
Transmission method 10/100 Mbps polymer/HCS fibers on the MMS
Easy to assemble polymer fibers can now also be used for Ethernet. This cost-effective fiber
optic technology can cover distances of up to 50 m. This provides cost savings both during
installation and for maintenance when replacing mechanically damaged fiber optic cables.
HCS fiber technology is available for distances of up to 300 m.
Unless stated otherwise, all information in this manual is valid for the FL SWITCH MM HS
and FL SWITCH MM HS/M modular devices, as well as for the FL MXT and FL MXT/M
extension stations, and the FL SWITCH MCS 16TX and FL SWITCH MCS 14TX/2FX
compact devices.
RSPSupply - 1-888-532-2706 - www.RSPSupply.com
http://www.RSPSupply.com/p-14178-Phoenix-Contact-2832357-FL-IF-2TX-VS-RJ-D-Media-Module-for-Modular-Switch.aspx

FL SWITCH MM HS
1-2 PHOENIX CONTACT 6874_en_16
Maximum availability Maximum network availability
A device design that does not use a fan, the redundant power supply, and conformance with
all relevant industrial standards in terms of EMC, climate, mechanical load, etc. ensure the
highest possible level of availability.
Redundancy can also be created with standards: the (Rapid) Spanning Tree Protocol or
MRP (Media Redundancy Protocol) ensure the safe operation of the entire network
regardless of topology, even in the event of a cable interrupt.
All information Clear information
You can label your device clearly using the large labeling field, and read operating states
and additional information from the two-digit 7-segment display. Two LEDs per port with
switchable information ensure that you always have sufficient local information. A web
server and an SNMP agent are provided for diagnostics, maintenance, and configuration
via the network. A terminal access point can be used for local operation.
Port mirroring Port mirroring can be used to monitor data traffic on the network connections.
Modularity Modular structure of the MMS
Depending on your requirements, you can create a compact switch for the control cabinet
(with convenient connections on the front) or a switch for the terminal box (with connections
at the bottom). It is also possible to add a glass fiber interface or extend your existing station
from 8/16 ports to a maximum of 24 ports.
Figure 1-2 Possible system hardware
PROFINET The switches can be operated in PC WorX and Step 7 environments as conformance
class B PROFINET IO devices. Connections to PLC systems can be easily implemented for
diagnostic and communication applications.
RSPSupply - 1-888-532-2706 - www.RSPSupply.com
http://www.RSPSupply.com/p-14178-Phoenix-Contact-2832357-FL-IF-2TX-VS-RJ-D-Media-Module-for-Modular-Switch.aspx

The Modular Managed Switch System (MMS) and the Managed Compact Switch (MCS)
6874_en_16 PHOENIX CONTACT 1-3
Ethernet/IP In the Ethernet/IP environment the switches support the IGMP snooping function and
multicast filtering.
Smart mode For easy configuration, the switches support Smart mode in which the operating state can
be changed without WBM.
Features and fields of application of the MMS and MCS
– Increased network performance by filtering data traffic:
- Local data traffic remains local.
- The data volume in the network segments is reduced.
– Easy network expansion and network configuration.
– Coupling segments with different transmission speeds.
Automatic detection of 10 Mbps or 100 Mbps data transmission rate with auto crossing.
– Increased availability through the use of redundant transmission paths with Rapid
Spanning Tree. Support of various topologies and meshed structures as well as ring
topologies with special ring detection. Fast switch-over times with RSTP fast ring
detection.
– Configuration of switches using web-based management, SNMP, Telnet or locally via
a V.24 (RS-232) interface.
– Multicast filtering (static and dynamic).
– IGMP snooping, optional querier function.
– VLAN support according to 802.1Q (32 VLANs).
– Port security functions.
– Access control for web-based management (WBM).
– Optimum support of the PROFINET RT and Ethernet/IP automation
protocols.
– Integration in PROFINET environments.
– Topology detection using LLDP (Link Layer Discovery Protocol).
– Address assignment via BootP, DHCP, DCP or statically.
– Address assignment using DHCP option 82 relay agent.
– MMS: Support of Power over Ethernet (PoE).
– MMS: Support of POF-SCRJ
– Support of the Media Redundancy Protocol (MRP), both as a client and as the manager
(in conjunction with the "FL IF MEM 2TX-D/MRM" interface module for the MMS or the
"FL MEM PLUG/MRM" interface module for the MCS). The MRP ring can thus be
created using any MMS/MCS ports, they simply have to be defined.
1.2.1 System components (MMS)
Central element
FL SWITCH MM HS
The head station is the central element of the Modular Managed Switch System. It contains
all the management functions, and the interface modules provide it with the desired
interfaces to the network. Up to two extension modules can be connected to a head station,
which means that the maximum system configuration comprises 24 Ethernet ports.
RSPSupply - 1-888-532-2706 - www.RSPSupply.com
http://www.RSPSupply.com/p-14178-Phoenix-Contact-2832357-FL-IF-2TX-VS-RJ-D-Media-Module-for-Modular-Switch.aspx

FL SWITCH MM HS
1-4 PHOENIX CONTACT 6874_en_16
FL SWITCH MM HS/M Thanks to certification according to Germanischer Lloyd (GL Certificate No. 2427504 HH),
the FL SWITCH MM HS/M head station, the FL MXT/M extension module, and some of the
available interface modules have been approved for shipbuilding and
off/onshore applications. Please observe the list of GL-certified components on page 12-9.
Please also observe the notes for supply voltage connection on page 2-11.
Extension module
FL MXT
An extension module provides another 8 ports, which can be individually equipped with
interface modules. A maximum of 2 extension modules can be connected to the head
station. The maximum system configuration therefore comprises 24 ports.
FL MXT/M The FL MXT/M extension module is approved for shipbuilding and off/onshore applications
thanks to its certification according to GL (Certificate No. 2427504 HH).
Interface modules
FL IF ...
Interface modules provide the desired interface to the network. The two outlet directions,
the various types of media supported, and the port density of two ports per interface module
provide a high degree of flexibility in terms of the system configuration.
NOTE: Always switch off the supply voltage before inserting or removing extension
modules (FL MXT).
Do not connect more than two extension modules (FL MXT) to one head station.
It is not possible to operate the extension modules without the head station.
Please observe the list of GL-certified components on page 12-9.
RSPSupply - 1-888-532-2706 - www.RSPSupply.com
http://www.RSPSupply.com/p-14178-Phoenix-Contact-2832357-FL-IF-2TX-VS-RJ-D-Media-Module-for-Modular-Switch.aspx

The Modular Managed Switch System (MMS) and the Managed Compact Switch (MCS)
6874_en_16 PHOENIX CONTACT 1-5
1.2.2 MMS firmware versions and their functions
Firmware Version 1.03 provides the standard switch functions.
In addition, firmware Version 1.11 supports the Spanning Tree redundancy mechanism.
Firmware 2.03 offers the following additional functions:
–Multicastfiltermechanisms(maximum of 20 multicast groups)
– IGMP snooping and querier function
– Memory module support
Firmware 2.10 offers the following additional functions:
– Auto-refresh of various WBM pages
– POF and FX interface module support
– Extensive support and improved configuration handling of the memory module
– Extended multicast filtering (multicast transmitters are detected and added to multicast
groups)
– Extended IGMP snooping and IGMP query function (switch passively reads IGMP
membership reports, creates corresponding multicast groups, and sends IGMP
queries to multicast groups)
– Visualization of port capacity
– Port prioritization
Firmware 3.04 offers the following additional functions:
– VLAN support
– Rapid Spanning Tree support
– Security options (port-based security and access control for WBM)
– Optimization of the password concept
– Event table (logging of important events)
– Representation of MAC address table in WBM
Firmware 4.03 offers the following additional functions:
– Optimized Rapid Spanning Tree Protocol (RSTP) (improved switch-over times)
–Fastringdetection
– Large tree support
– Support of LLDP topology detection
– DHCP support
– DHCP with option 82 relay agent
– PROFINET device function and DCP
– Support of Power over Ethernet (IEEE 802.3af)
– Simplified port configuration
–IGMPqueryVersion1and2
Firmware 4.50 offers the following additional functions:
– Support of the POF-SCRJ interface module and corresponding diagnostics
– SNMP traps can be disabled individually
– The VLAN for management can be set: VLAN ID to manage (web, SNMP, ping, IGMP
query) the switch in "VLAN Tagging" mode
– DHCP relay agent can be disabled according to the port
– PROFINET alarms and configuration comparison
– Fast aging on link down
RSPSupply - 1-888-532-2706 - www.RSPSupply.com
http://www.RSPSupply.com/p-14178-Phoenix-Contact-2832357-FL-IF-2TX-VS-RJ-D-Media-Module-for-Modular-Switch.aspx

FL SWITCH MM HS
1-6 PHOENIX CONTACT 6874_en_16
– Extended LED diagnostics (identification of the switch in the PROFINET environment
and detection of the "Missing IP parameter following restart" status)
– PoE traps (when the PoE status changes)
– Test traps to check communication
– Deletion of the MAC address table from WBM and SNMP
Firmware 4.60 offers the following additional functions:
– Support of the Media Redundancy Protocol, both as a client and as the manager
– Extended PROFINET IO device function
– Support of up to 128 multicast groups, of which up to 20 are static groups
Firmware 4.70a offers the following additional functions:
– Support of time synchronization using SNTP
– Support of the PDEV function for the PROFINET environment
– Support of Smart mode for easily selecting the operating mode
RSPSupply - 1-888-532-2706 - www.RSPSupply.com
http://www.RSPSupply.com/p-14178-Phoenix-Contact-2832357-FL-IF-2TX-VS-RJ-D-Media-Module-for-Modular-Switch.aspx

The Modular Managed Switch System (MMS) and the Managed Compact Switch (MCS)
6874_en_16 PHOENIX CONTACT 1-7
1.2.3 Firmware functions and the required hardware (MMS)
1.2.4 Device view (MMS)
1.2.4.1 Front view of the head station
Figure 1-3 Front view of the head station
– Diagnostic/status indicators
Important information is displayed directly on the device. Each port has two LEDs. The
left-hand LED always indicates the "LINK", while the right-hand LED display is set with
the function switch.
– Function switch for LEDs
The MODE function switch can be used to specify which information is displayed by the
second port-specific LED. The three LEDs above the switch indicate the selected
mode. This information is then displayed by all port-specific LEDs (see also example
on page 1-13).
– Connection for extension module (FL MXT)
Connect the first of a maximum of two extension modules here.
Table 1-1 Functions and the required hardware
Function Required hardware for the
head station
Required hardware for the
extension modules
Standard switch
functions
Hardware Version ≥ 3
(includes system bus Version 4.1)
Hardware Version ≥ 2
(includes system bus Version 3.1)
Memory module
support
Hardware Version ≥ 4
(includes system bus Version 4.2)
Hardware Version ≥ 2
(includes system bus Version 3.1)
PoE module sup-
port
Hardware Version ≥ 6
(includes system bus Version 5.0)
Hardware Version ≥ 4
(includes system bus Version 4.0)
POF-SCRJ mod-
ule support
Hardware Version ≥ 6
(includes system bus Version 5.0)
Hardware Version ≥ 4
(includes system bus Version 4.0)
MRP module
support
Hardware Version ≥ 6
(includes system bus Version 5.0)
Hardware Version ≥ 4
(includes system bus Version 4.0)
Slots for interface
modules
Mini-DIN
V.24 (RS-232)
Alarm
contact
Supply voltage
connection
Diagnostic
display
Diagnostic/status
indicators
Reset
button
Function switch
for LEDs
Connection for
extension module
(outgoing system
interface)
67961010
Labeling field
US1
US2
Fail
Reset
MODE
ACT
100 FD
FL SWITCH MM HS
Ord. No. 28 32 32 6
US2US1 GND GND R1 R2
00A0451BDD
MAC
Address
MAC address
LNK MODE
1
2
X1
LNK MODE
1
2
X2
LNK MODE
1
2
X3
LNK MODE
1
2
X4
V. 2 4
RSPSupply - 1-888-532-2706 - www.RSPSupply.com
http://www.RSPSupply.com/p-14178-Phoenix-Contact-2832357-FL-IF-2TX-VS-RJ-D-Media-Module-for-Modular-Switch.aspx

FL SWITCH MM HS
1-8 PHOENIX CONTACT 6874_en_16
– Slots for interface modules
This is where the various interface modules (each with two ports) are inserted and
locked in place.
– Mini-DIN V.24 (RS-232)
V.24 (RS-232) interface in Mini-DIN format for local configuration via the serial
interface.
–Alarmcontact
The floating alarm contact can be connected here via a 2-pos. COMBICON connector.
– Supply voltage connection
The supply voltage can be connected via the 4-pos. COMBICON connector
(redundancy is optional).
– Reset button
– Diagnostic display
Various operating states or error states can be displayed here. For a list of possible
codes, please refer to page 1-14.
1.2.4.2 Front view of the extension module
Figure 1-4 Front view of the extension module
– Diagnostic/status indicators
Important information is displayed directly on the device.
– Connection for second extension module
Connect the second extension module here.
– Connection for interface modules
This is where the various interface modules are inserted and locked in place.
In order to prevent an accidental MMS reset, the reset button must be held down for a few
seconds before it triggers a reset.
67961011
Diagnostic/status
indicators
Connection for first
e
xtension module/head
station (incoming
system interface)
LNK
MODE
1
2
X1
LNK
MODE
1
2
X2
LNK
MODE
1
2
X3
LNK
MODE
1
2
X4
Slots for interface modules
Connection for second
extension module
(outgoing system
interface)
RSPSupply - 1-888-532-2706 - www.RSPSupply.com
http://www.RSPSupply.com/p-14178-Phoenix-Contact-2832357-FL-IF-2TX-VS-RJ-D-Media-Module-for-Modular-Switch.aspx

The Modular Managed Switch System (MMS) and the Managed Compact Switch (MCS)
6874_en_16 PHOENIX CONTACT 1-9
– Slot for first extension module/head station
Connect this extension module either to a head station or to the first extension module
here.
1.2.4.3 View of the interface modules (example)
Figure 1-5 View of the interface modules (example)
– Connection for extension module/head station
This connector is used to connect the interface module and the extension module or the
head station.
–Guidebars
These bars aid installation and hold the interface modules securely in place.
– Positive latches
These latches must be pressed in order to remove the interface module (previous
versions used mounting screws).
–Ethernetports
These are the ports for the various interfaces and connection directions.
– Marking groove for Zackband ZBF ...
– Mounting screws to lock the interface modules in place.
68741002
Guide bars
Positive latches
Ethernet ports,
connection on the front Ethernet ports,
connection on the bottom
Connection for head
station/extension module
Marking groove
for Zackband ZBF
Mounting screws
RSPSupply - 1-888-532-2706 - www.RSPSupply.com
http://www.RSPSupply.com/p-14178-Phoenix-Contact-2832357-FL-IF-2TX-VS-RJ-D-Media-Module-for-Modular-Switch.aspx

FL SWITCH MM HS
1-10 PHOENIX CONTACT 6874_en_16
1.2.5 Dimensions of the Modular Managed Switch System
for normal operation
Figure 1-6 MMS housing dimensions in millimeters
Housing dimensions of the converter board with interface module
Housing width: 67 mm
Figure 1-7 Housing dimensions of the FL CB IF converter board
LNK MODE
1
2
X1
LNK MODE
1
2
X2
LNK MODE
1
2
X3
LNK MODE
1
2
X4
US1
US2
Fail
Reset
MODE
ACT 100 FD
FL SWITCH MM HS
Ord. No. 28 32 32 6
US2US1 GND GND
R1 R2
00A0451BDD
MAC
Address
V. 2 4
LNK MODE
1
2
X1
LNK MODE
1
2
X2
LNK MODE
1
2
X3
LNK MODE
1
2
X4
LNK MODE
1
2
X1
LNK MODE
1
2
X2
LNK MODE
1
2
X3
LNK MODE
1
2
X4
68740007
214 127 127
341
114.5
5540
95
68740013
468
110.5
RSPSupply - 1-888-532-2706 - www.RSPSupply.com
http://www.RSPSupply.com/p-14178-Phoenix-Contact-2832357-FL-IF-2TX-VS-RJ-D-Media-Module-for-Modular-Switch.aspx