Planet HDVR-430 Mounting instructions

Searching and Login
Please install the utility from the CD and launch it to search the HDVR, after click the IP
Search, you could see the HDVR online. The HDVR should be located and its IP address
should be displayed:
If the HDVR which you search is not displayed, you could try to click the Add Device button
to enter the IP address to search it.
Final, you could double click the IP address or click the WebBrowser button to enter the Web
UI of the HDVR.
Local Display Login Window
Web UI Login Window
To enter the main menu and set up the HDVR, the default IP address is 192.168.0.20. And
both of the default User Name / Password are admin / admin.
Note
For more detailed information, please refer to the user’s manual on the CD.

Step 3: Please align the screw holes on the HDD with those on the HDVR case and secure
them with the given screws.
Step 4: After the HDD is secured, it should look like the one in the pictures (front and
back) below:
Contents
Quick Installation Guide x 1 Power Adapter x 1 USB Mouse x 1
CD Disk x 1 SATA Cable x 1 Food Pad x 4
RS485 Connector x 1 SATA Power Cable x 1 Screw Kit x 1
Hard Disk Installation
Note
Before installing the HDD, please make sure there is no pre-congured
partition in this HDD. If yes, please delete all the partitions before the
installation.
Step 1: Remove the upper case.
Step 2: Plug the HDD power cable and SATA cable into the slot of the PCBA board and the
HDD, respectively, making sure the connections are well done.
Hardware Connection
HDVR-830
HDVR-430
HDVR-1630
Name Description
V1-V16 Composite video broadcast signal (CVBS) input interface.
A1-A4 The input interface of the audio signal.
V-OUT Composite video broadcast signal (CVBS) output interface.
A-OUT The output interface of the audio signal.
LAN The network interface of RJ-45.
HDMI The output interface of the HDMI video signal.
VGA The output interface of the VGA video signal.
Power 12V DC, 2A
485+/485- The interface of the alarm input, the alarm output and RS-485.

Step 3: Please align the screw holes on the HDD with those on the HDVR case and secure
them with the given screws.
Step 4: After the HDD is secured, it should look like the one in the pictures (front and
back) below:
Contents
Quick Installation Guide x 1 Power Adapter x 1 USB Mouse x 1
CD Disk x 1 SATA Cable x 1 Food Pad x 4
RS485 Connector x 1 SATA Power Cable x 1 Screw Kit x 1
Hard Disk Installation
Note
Before installing the HDD, please make sure there is no pre-congured
partition in this HDD. If yes, please delete all the partitions before the
installation.
Step 1: Remove the upper case.
Step 2: Plug the HDD power cable and SATA cable into the slot of the PCBA board and the
HDD, respectively, making sure the connections are well done.
Hardware Connection
HDVR-830
HDVR-430
HDVR-1630
Name Description
V1-V16 Composite video broadcast signal (CVBS) input interface.
A1-A4 The input interface of the audio signal.
V-OUT Composite video broadcast signal (CVBS) output interface.
A-OUT The output interface of the audio signal.
LAN The network interface of RJ-45.
HDMI The output interface of the HDMI video signal.
VGA The output interface of the VGA video signal.
Power 12V DC, 2A
485+/485- The interface of the alarm input, the alarm output and RS-485.

Step 3: Please align the screw holes on the HDD with those on the HDVR case and secure
them with the given screws.
Step 4: After the HDD is secured, it should look like the one in the pictures (front and
back) below:
Contents
Quick Installation Guide x 1 Power Adapter x 1 USB Mouse x 1
CD Disk x 1 SATA Cable x 1 Food Pad x 4
RS485 Connector x 1 SATA Power Cable x 1 Screw Kit x 1
Hard Disk Installation
Note
Before installing the HDD, please make sure there is no pre-congured
partition in this HDD. If yes, please delete all the partitions before the
installation.
Step 1: Remove the upper case.
Step 2: Plug the HDD power cable and SATA cable into the slot of the PCBA board and the
HDD, respectively, making sure the connections are well done.
Hardware Connection
HDVR-830
HDVR-430
HDVR-1630
Name Description
V1-V16 Composite video broadcast signal (CVBS) input interface.
A1-A4 The input interface of the audio signal.
V-OUT Composite video broadcast signal (CVBS) output interface.
A-OUT The output interface of the audio signal.
LAN The network interface of RJ-45.
HDMI The output interface of the HDMI video signal.
VGA The output interface of the VGA video signal.
Power 12V DC, 2A
485+/485- The interface of the alarm input, the alarm output and RS-485.

Step 3: Please align the screw holes on the HDD with those on the HDVR case and secure
them with the given screws.
Step 4: After the HDD is secured, it should look like the one in the pictures (front and
back) below:
Contents
Quick Installation Guide x 1 Power Adapter x 1 USB Mouse x 1
CD Disk x 1 SATA Cable x 1 Food Pad x 4
RS485 Connector x 1 SATA Power Cable x 1 Screw Kit x 1
Hard Disk Installation
Note
Before installing the HDD, please make sure there is no pre-congured
partition in this HDD. If yes, please delete all the partitions before the
installation.
Step 1: Remove the upper case.
Step 2: Plug the HDD power cable and SATA cable into the slot of the PCBA board and the
HDD, respectively, making sure the connections are well done.
Hardware Connection
HDVR-830
HDVR-430
HDVR-1630
Name Description
V1-V16 Composite video broadcast signal (CVBS) input interface.
A1-A4 The input interface of the audio signal.
V-OUT Composite video broadcast signal (CVBS) output interface.
A-OUT The output interface of the audio signal.
LAN The network interface of RJ-45.
HDMI The output interface of the HDMI video signal.
VGA The output interface of the VGA video signal.
Power 12V DC, 2A
485+/485- The interface of the alarm input, the alarm output and RS-485.

Searching and Login
Please install the utility from the CD and launch it to search the HDVR, after click the IP
Search, you could see the HDVR online. The HDVR should be located and its IP address
should be displayed:
If the HDVR which you search is not displayed, you could try to click the Add Device button
to enter the IP address to search it.
Final, you could double click the IP address or click the WebBrowser button to enter the Web
UI of the HDVR.
Local Display Login Window
Web UI Login Window
To enter the main menu and set up the HDVR, the default IP address is 192.168.0.20. And
both of the default User Name / Password are admin / admin.
Note
For more detailed information, please refer to the user’s manual on the CD.

Searching and Login
Please install the utility from the CD and launch it to search the HDVR, after click the IP
Search, you could see the HDVR online. The HDVR should be located and its IP address
should be displayed:
If the HDVR which you search is not displayed, you could try to click the Add Device button
to enter the IP address to search it.
Final, you could double click the IP address or click the WebBrowser button to enter the Web
UI of the HDVR.
Local Display Login Window
Web UI Login Window
To enter the main menu and set up the HDVR, the default IP address is 192.168.0.20. And
both of the default User Name / Password are admin / admin.
Note
For more detailed information, please refer to the user’s manual on the CD.

Searching and Login
Please install the utility from the CD and launch it to search the HDVR, after click the IP
Search, you could see the HDVR online. The HDVR should be located and its IP address
should be displayed:
If the HDVR which you search is not displayed, you could try to click the Add Device button
to enter the IP address to search it.
Final, you could double click the IP address or click the WebBrowser button to enter the Web
UI of the HDVR.
Local Display Login Window
Web UI Login Window
To enter the main menu and set up the HDVR, the default IP address is 192.168.0.20. And
both of the default User Name / Password are admin / admin.
Note
For more detailed information, please refer to the user’s manual on the CD.